Address Details

contract

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/ownership/Ownable.sol";
import "openzeppelin-solidity/contracts/math/Math.sol";
import "openzeppelin-solidity/contracts/math/SafeMath.sol";
import "openzeppelin-solidity/contracts/utils/Address.sol";

import "./interfaces/IGovernance.sol";
import "./Proposals.sol";
import "../common/interfaces/IAccounts.sol";
import "../common/ExtractFunctionSignature.sol";
import "../common/Initializable.sol";
import "../common/FixidityLib.sol";
import "../common/linkedlists/IntegerSortedLinkedList.sol";
import "../common/UsingRegistry.sol";
import "../common/UsingPrecompiles.sol";
import "../common/interfaces/ICeloVersionedContract.sol";
import "../common/libraries/ReentrancyGuard.sol";

/**
 * @title A contract for making, passing, and executing on-chain governance proposals.
 */
contract Governance is
  IGovernance,
  ICeloVersionedContract,
  Ownable,
  Initializable,
  ReentrancyGuard,
  UsingRegistry,
  UsingPrecompiles
{
  using Proposals for Proposals.Proposal;
  using FixidityLib for FixidityLib.Fraction;
  using SafeMath for uint256;
  using IntegerSortedLinkedList for SortedLinkedList.List;
  using BytesLib for bytes;
  using Address for address payable; // prettier-ignore

  uint256 private constant FIXED_HALF = 500000000000000000000000;

  enum VoteValue { None, Abstain, No, Yes }

  struct UpvoteRecord {
    uint256 proposalId;
    uint256 weight;
  }

  struct VoteRecord {
    Proposals.VoteValue deprecated_value; // obsolete
    uint256 proposalId;
    uint256 deprecated_weight; // obsolete
    uint256 yesVotes;
    uint256 noVotes;
    uint256 abstainVotes;
  }

  struct Voter {
    // Key of the proposal voted for in the proposal queue
    UpvoteRecord upvote;
    uint256 mostRecentReferendumProposal;
    // Maps a `dequeued` index to a voter's vote record.
    mapping(uint256 => VoteRecord) referendumVotes;
  }

  struct ContractConstitution {
    FixidityLib.Fraction defaultThreshold;
    // Maps a function ID to a corresponding threshold, overriding the default.
    mapping(bytes4 => FixidityLib.Fraction) functionThresholds;
  }

  struct HotfixRecord {
    bool executed;
    bool approved;
    uint256 preparedEpoch;
    mapping(address => bool) whitelisted;
  }

  // The baseline is updated as
  // max{floor, (1 - baselineUpdateFactor) * baseline + baselineUpdateFactor * participation}
  struct ParticipationParameters {
    // The average network participation in governance, weighted toward recent proposals.
    FixidityLib.Fraction baseline;
    // The lower bound on the participation baseline.
    FixidityLib.Fraction baselineFloor;
    // The weight of the most recent proposal's participation on the baseline.
    FixidityLib.Fraction baselineUpdateFactor;
    // The proportion of the baseline that constitutes quorum.
    FixidityLib.Fraction baselineQuorumFactor;
  }

  Proposals.StageDurations public stageDurations;
  uint256 public queueExpiry;
  uint256 public dequeueFrequency;
  address public approver;
  uint256 public lastDequeue;
  uint256 public concurrentProposals;
  uint256 public proposalCount;
  uint256 public minDeposit;
  mapping(address => uint256) public refundedDeposits;
  mapping(address => ContractConstitution) private constitution;
  mapping(uint256 => Proposals.Proposal) private proposals;
  mapping(address => Voter) internal voters;
  mapping(bytes32 => HotfixRecord) public hotfixes;
  SortedLinkedList.List private queue;
  uint256[] public dequeued;
  uint256[] public emptyIndices;
  ParticipationParameters private participationParameters;

  event ApproverSet(address indexed approver);

  event ConcurrentProposalsSet(uint256 concurrentProposals);

  event MinDepositSet(uint256 minDeposit);

  event QueueExpirySet(uint256 queueExpiry);

  event DequeueFrequencySet(uint256 dequeueFrequency);

  event ReferendumStageDurationSet(uint256 referendumStageDuration);

  event ExecutionStageDurationSet(uint256 executionStageDuration);

  event ConstitutionSet(address indexed destination, bytes4 indexed functionId, uint256 threshold);

  event ProposalQueued(
    uint256 indexed proposalId,
    address indexed proposer,
    uint256 transactionCount,
    uint256 deposit,
    uint256 timestamp
  );

  event ProposalUpvoted(uint256 indexed proposalId, address indexed account, uint256 upvotes);

  event ProposalUpvoteRevoked(
    uint256 indexed proposalId,
    address indexed account,
    uint256 revokedUpvotes
  );

  event ProposalDequeued(uint256 indexed proposalId, uint256 timestamp);

  event ProposalApproved(uint256 indexed proposalId);

  event ProposalVoted(
    uint256 indexed proposalId,
    address indexed account,
    uint256 value,
    uint256 weight
  );

  event ProposalVotedV2(
    uint256 indexed proposalId,
    address indexed account,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  );

  event ProposalVoteRevoked(
    uint256 indexed proposalId,
    address indexed account,
    uint256 value,
    uint256 weight
  );

  event ProposalVoteRevokedV2(
    uint256 indexed proposalId,
    address indexed account,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  );

  event ProposalExecuted(uint256 indexed proposalId);

  event ProposalExpired(uint256 indexed proposalId);

  event ParticipationBaselineUpdated(uint256 participationBaseline);

  event ParticipationFloorSet(uint256 participationFloor);

  event ParticipationBaselineUpdateFactorSet(uint256 baselineUpdateFactor);

  event ParticipationBaselineQuorumFactorSet(uint256 baselineQuorumFactor);

  event HotfixWhitelisted(bytes32 indexed hash, address whitelister);

  event HotfixApproved(bytes32 indexed hash);

  event HotfixPrepared(bytes32 indexed hash, uint256 indexed epoch);

  event HotfixExecuted(bytes32 indexed hash);

  modifier hotfixNotExecuted(bytes32 hash) {
    require(!hotfixes[hash].executed, "hotfix already executed");
    _;
  }

  modifier onlyApprover() {
    require(msg.sender == approver, "msg.sender not approver");
    _;
  }

  modifier onlyLockedGold() {
    require(msg.sender == address(getLockedGold()), "msg.sender not lockedGold");
    _;
  }

  /**
   * @notice Sets initialized == true on implementation contracts
   * @param test Set to true to skip implementation initialization
   */
  constructor(bool test) public Initializable(test) {}

  function() external payable {
    require(msg.data.length == 0, "unknown method");
  }

  /**
   * @notice Returns the storage, major, minor, and patch version of the contract.
   * @return Storage version of the contract.
   * @return Major version of the contract.
   * @return Minor version of the contract.
   * @return Patch version of the contract.
   */
  function getVersionNumber() external pure returns (uint256, uint256, uint256, uint256) {
    return (1, 4, 1, 0);
  }

  /**
   * @notice Used in place of the constructor to allow the contract to be upgradable via proxy.
   * @param registryAddress The address of the registry contract.
   * @param _approver The address that needs to approve proposals to move to the referendum stage.
   * @param _concurrentProposals The number of proposals to dequeue at once.
   * @param _minDeposit The minimum CELO deposit needed to make a proposal.
   * @param _queueExpiry The number of seconds a proposal can stay in the queue before expiring.
   * @param _dequeueFrequency The number of seconds before the next batch of proposals can be
   *   dequeued.
   * @param referendumStageDuration The number of seconds users have to vote on a dequeued proposal
   *   after the approval stage ends.
   * @param executionStageDuration The number of seconds users have to execute a passed proposal
   *   after the referendum stage ends.
   * @param participationBaseline The initial value of the participation baseline.
   * @param participationFloor The participation floor.
   * @param baselineUpdateFactor The weight of the new participation in the baseline update rule.
   * @param baselineQuorumFactor The proportion of the baseline that constitutes quorum.
   * @dev Should be called only once.
   */
  function initialize(
    address registryAddress,
    address _approver,
    uint256 _concurrentProposals,
    uint256 _minDeposit,
    uint256 _queueExpiry,
    uint256 _dequeueFrequency,
    uint256 referendumStageDuration,
    uint256 executionStageDuration,
    uint256 participationBaseline,
    uint256 participationFloor,
    uint256 baselineUpdateFactor,
    uint256 baselineQuorumFactor
  ) external initializer {
    _transferOwnership(msg.sender);
    setRegistry(registryAddress);
    setApprover(_approver);
    setConcurrentProposals(_concurrentProposals);
    setMinDeposit(_minDeposit);
    setQueueExpiry(_queueExpiry);
    setDequeueFrequency(_dequeueFrequency);
    setReferendumStageDuration(referendumStageDuration);
    setExecutionStageDuration(executionStageDuration);
    setParticipationBaseline(participationBaseline);
    setParticipationFloor(participationFloor);
    setBaselineUpdateFactor(baselineUpdateFactor);
    setBaselineQuorumFactor(baselineQuorumFactor);
    // solhint-disable-next-line not-rely-on-time
    lastDequeue = now;
  }

  /**
   * @notice Updates the address that has permission to approve proposals in the approval stage.
   * @param _approver The address that has permission to approve proposals in the approval stage.
   */
  function setApprover(address _approver) public onlyOwner {
    require(_approver != address(0), "Approver cannot be 0");
    require(_approver != approver, "Approver unchanged");
    approver = _approver;
    emit ApproverSet(_approver);
  }

  /**
   * @notice Updates the number of proposals to dequeue at a time.
   * @param _concurrentProposals The number of proposals to dequeue at at a time.
   */
  function setConcurrentProposals(uint256 _concurrentProposals) public onlyOwner {
    require(_concurrentProposals != 0, "Number of proposals must be larger than zero");
    require(_concurrentProposals != concurrentProposals, "Number of proposals unchanged");
    concurrentProposals = _concurrentProposals;
    emit ConcurrentProposalsSet(_concurrentProposals);
  }

  /**
   * @notice Updates the minimum deposit needed to make a proposal.
   * @param _minDeposit The minimum CELO deposit needed to make a proposal.
   */
  function setMinDeposit(uint256 _minDeposit) public onlyOwner {
    require(_minDeposit != 0, "minDeposit must be larger than 0");
    require(_minDeposit != minDeposit, "Minimum deposit unchanged");
    minDeposit = _minDeposit;
    emit MinDepositSet(_minDeposit);
  }

  /**
   * @notice Updates the number of seconds before a queued proposal expires.
   * @param _queueExpiry The number of seconds a proposal can stay in the queue before expiring.
   */
  function setQueueExpiry(uint256 _queueExpiry) public onlyOwner {
    require(_queueExpiry != 0, "QueueExpiry must be larger than 0");
    require(_queueExpiry != queueExpiry, "QueueExpiry unchanged");
    queueExpiry = _queueExpiry;
    emit QueueExpirySet(_queueExpiry);
  }

  /**
   * @notice Updates the minimum number of seconds before the next batch of proposals can be
   *   dequeued.
   * @param _dequeueFrequency The number of seconds before the next batch of proposals can be
   *   dequeued.
   */
  function setDequeueFrequency(uint256 _dequeueFrequency) public onlyOwner {
    require(_dequeueFrequency != 0, "dequeueFrequency must be larger than 0");
    require(_dequeueFrequency != dequeueFrequency, "dequeueFrequency unchanged");
    dequeueFrequency = _dequeueFrequency;
    emit DequeueFrequencySet(_dequeueFrequency);
  }

  /**
   * @notice Updates the number of seconds proposals stay in the referendum stage.
   * @param referendumStageDuration The number of seconds proposals stay in the referendum stage.
   */
  function setReferendumStageDuration(uint256 referendumStageDuration) public onlyOwner {
    require(referendumStageDuration != 0, "Duration must be larger than 0");
    require(referendumStageDuration != stageDurations.referendum, "Duration unchanged");
    stageDurations.referendum = referendumStageDuration;
    emit ReferendumStageDurationSet(referendumStageDuration);
  }

  /**
   * @notice Updates the number of seconds proposals stay in the execution stage.
   * @param executionStageDuration The number of seconds proposals stay in the execution stage.
   */
  function setExecutionStageDuration(uint256 executionStageDuration) public onlyOwner {
    require(executionStageDuration != 0, "Duration must be larger than 0");
    require(executionStageDuration != stageDurations.execution, "Duration unchanged");
    stageDurations.execution = executionStageDuration;
    emit ExecutionStageDurationSet(executionStageDuration);
  }

  /**
   * @notice Updates the participation baseline.
   * @param participationBaseline The value of the baseline.
   */
  function setParticipationBaseline(uint256 participationBaseline) public onlyOwner {
    FixidityLib.Fraction memory participationBaselineFrac = FixidityLib.wrap(participationBaseline);
    require(
      FixidityLib.isProperFraction(participationBaselineFrac),
      "Participation baseline greater than one"
    );
    require(
      !participationBaselineFrac.equals(participationParameters.baseline),
      "Participation baseline unchanged"
    );
    participationParameters.baseline = participationBaselineFrac;
    emit ParticipationBaselineUpdated(participationBaseline);
  }

  /**
   * @notice Updates the floor of the participation baseline.
   * @param participationFloor The value at which the baseline is floored.
   */
  function setParticipationFloor(uint256 participationFloor) public onlyOwner {
    FixidityLib.Fraction memory participationFloorFrac = FixidityLib.wrap(participationFloor);
    require(
      FixidityLib.isProperFraction(participationFloorFrac),
      "Participation floor greater than one"
    );
    require(
      !participationFloorFrac.equals(participationParameters.baselineFloor),
      "Participation baseline floor unchanged"
    );
    participationParameters.baselineFloor = participationFloorFrac;
    emit ParticipationFloorSet(participationFloor);
  }

  /**
   * @notice Updates the weight of the new participation in the baseline update rule.
   * @param baselineUpdateFactor The new baseline update factor.
   */
  function setBaselineUpdateFactor(uint256 baselineUpdateFactor) public onlyOwner {
    FixidityLib.Fraction memory baselineUpdateFactorFrac = FixidityLib.wrap(baselineUpdateFactor);
    require(
      FixidityLib.isProperFraction(baselineUpdateFactorFrac),
      "Baseline update factor greater than one"
    );
    require(
      !baselineUpdateFactorFrac.equals(participationParameters.baselineUpdateFactor),
      "Baseline update factor unchanged"
    );
    participationParameters.baselineUpdateFactor = baselineUpdateFactorFrac;
    emit ParticipationBaselineUpdateFactorSet(baselineUpdateFactor);
  }

  /**
   * @notice Updates the proportion of the baseline that constitutes quorum.
   * @param baselineQuorumFactor The new baseline quorum factor.
   */
  function setBaselineQuorumFactor(uint256 baselineQuorumFactor) public onlyOwner {
    FixidityLib.Fraction memory baselineQuorumFactorFrac = FixidityLib.wrap(baselineQuorumFactor);
    require(
      FixidityLib.isProperFraction(baselineQuorumFactorFrac),
      "Baseline quorum factor greater than one"
    );
    require(
      !baselineQuorumFactorFrac.equals(participationParameters.baselineQuorumFactor),
      "Baseline quorum factor unchanged"
    );
    participationParameters.baselineQuorumFactor = baselineQuorumFactorFrac;
    emit ParticipationBaselineQuorumFactorSet(baselineQuorumFactor);
  }

  /**
   * @notice Updates the ratio of yes:yes+no votes needed for a specific class of proposals to pass.
   * @param destination The destination of proposals for which this threshold should apply.
   * @param functionId The function ID of proposals for which this threshold should apply. Zero
   *   will set the default.
   * @param threshold The threshold.
   * @dev If no constitution is explicitly set the default is a simple majority, i.e. 1:2.
   */
  function setConstitution(address destination, bytes4 functionId, uint256 threshold)
    external
    onlyOwner
  {
    require(destination != address(0), "Destination cannot be zero");
    require(
      threshold > FIXED_HALF && threshold <= FixidityLib.fixed1().unwrap(),
      "Threshold has to be greater than majority and not greater than unanimity"
    );
    if (functionId == 0) {
      constitution[destination].defaultThreshold = FixidityLib.wrap(threshold);
    } else {
      constitution[destination].functionThresholds[functionId] = FixidityLib.wrap(threshold);
    }
    emit ConstitutionSet(destination, functionId, threshold);
  }

  /**
   * @notice Creates a new proposal and adds it to end of the queue with no upvotes.
   * @param values The values of CELO to be sent in the proposed transactions.
   * @param destinations The destination addresses of the proposed transactions.
   * @param data The concatenated data to be included in the proposed transactions.
   * @param dataLengths The lengths of each transaction's data.
   * @return The ID of the newly proposed proposal.
   * @dev The minimum deposit must be included with the proposal, returned if/when the proposal is
   *   dequeued.
   */
  function propose(
    uint256[] calldata values,
    address[] calldata destinations,
    bytes calldata data,
    uint256[] calldata dataLengths,
    string calldata descriptionUrl
  ) external payable returns (uint256) {
    dequeueProposalsIfReady();
    require(msg.value >= minDeposit, "Too small deposit");

    proposalCount = proposalCount.add(1);
    Proposals.Proposal storage proposal = proposals[proposalCount];
    proposal.make(values, destinations, data, dataLengths, msg.sender, msg.value);
    proposal.setDescriptionUrl(descriptionUrl);
    queue.push(proposalCount);
    // solhint-disable-next-line not-rely-on-time
    emit ProposalQueued(proposalCount, msg.sender, proposal.transactions.length, msg.value, now);
    return proposalCount;
  }

  /**
   * @notice Removes a proposal if it is queued and expired.
   * @param proposalId The ID of the proposal to remove.
   * @return Whether the proposal was removed.
   */
  function removeIfQueuedAndExpired(uint256 proposalId) private returns (bool) {
    if (isQueued(proposalId) && isQueuedProposalExpired(proposalId)) {
      queue.remove(proposalId);
      emit ProposalExpired(proposalId);
      return true;
    }
    return false;
  }

  /**
   * @notice Requires a proposal is dequeued and removes it if expired.
   * @param proposalId The ID of the proposal.
   * @return The proposal storage struct corresponding to `proposalId`.
   * @return The proposal stage corresponding to `proposalId`.
   */
  function requireDequeuedAndDeleteExpired(uint256 proposalId, uint256 index)
    private
    returns (Proposals.Proposal storage, Proposals.Stage)
  {
    Proposals.Proposal storage proposal = proposals[proposalId];
    require(_isDequeuedProposal(proposal, proposalId, index), "Proposal not dequeued");
    Proposals.Stage stage = getProposalDequeuedStage(proposal);
    if (_isDequeuedProposalExpired(proposal, stage)) {
      deleteDequeuedProposal(proposal, proposalId, index);
      return (proposal, Proposals.Stage.Expiration);
    }
    return (proposal, stage);
  }

  /**
   * @notice Upvotes a queued proposal.
   * @param proposalId The ID of the proposal to upvote.
   * @param lesser The ID of the proposal that will be just behind `proposalId` in the queue.
   * @param greater The ID of the proposal that will be just ahead `proposalId` in the queue.
   * @return Whether or not the upvote was made successfully.
   * @dev Provide 0 for `lesser`/`greater` when the proposal will be at the tail/head of the queue.
   * @dev Reverts if the account has already upvoted a proposal in the queue.
   */
  function upvote(uint256 proposalId, uint256 lesser, uint256 greater)
    external
    nonReentrant
    returns (bool)
  {
    dequeueProposalsIfReady();
    // If acting on an expired proposal, expire the proposal and take no action.
    if (removeIfQueuedAndExpired(proposalId)) {
      return false;
    }

    address account = getAccounts().voteSignerToAccount(msg.sender);
    Voter storage voter = voters[account];
    removeIfQueuedAndExpired(voter.upvote.proposalId);

    // We can upvote a proposal in the queue if we're not already upvoting a proposal in the queue.
    uint256 weight = getLockedGold().getAccountTotalLockedGold(account);
    require(weight > 0, "cannot upvote without locking gold");
    require(queue.contains(proposalId), "cannot upvote a proposal not in the queue");
    require(
      voter.upvote.proposalId == 0 || !queue.contains(voter.upvote.proposalId),
      "cannot upvote more than one queued proposal"
    );
    uint256 upvotes = queue.getValue(proposalId).add(weight);
    queue.update(proposalId, upvotes, lesser, greater);
    voter.upvote = UpvoteRecord(proposalId, weight);
    emit ProposalUpvoted(proposalId, account, weight);
    return true;
  }

  /**
   * @notice Returns stage of governance process given proposal is in
   * @param proposalId The ID of the proposal to query.
   * @return proposal stage
   */
  function getProposalStage(uint256 proposalId) external view returns (Proposals.Stage) {
    if (proposalId == 0 || proposalId > proposalCount) {
      return Proposals.Stage.None;
    }
    Proposals.Proposal storage proposal = proposals[proposalId];
    if (isQueued(proposalId)) {
      return
        _isQueuedProposalExpired(proposal) ? Proposals.Stage.Expiration : Proposals.Stage.Queued;
    } else {
      Proposals.Stage stage = getProposalDequeuedStage(proposal);
      return _isDequeuedProposalExpired(proposal, stage) ? Proposals.Stage.Expiration : stage;
    }
  }

  /**
   * @notice Revokes an upvote on a queued proposal.
   * @param lesser The ID of the proposal that will be just behind the previously upvoted proposal
   *   in the queue.
   * @param greater The ID of the proposal that will be just ahead of the previously upvoted
   *   proposal in the queue.
   * @return Whether or not the upvote was revoked successfully.
   * @dev Provide 0 for `lesser`/`greater` when the proposal will be at the tail/head of the queue.
   */
  function revokeUpvote(uint256 lesser, uint256 greater) external nonReentrant returns (bool) {
    dequeueProposalsIfReady();
    address account = getAccounts().voteSignerToAccount(msg.sender);
    Voter storage voter = voters[account];
    uint256 proposalId = voter.upvote.proposalId;
    require(proposalId != 0, "Account has no historical upvote");
    removeIfQueuedAndExpired(proposalId);
    if (queue.contains(proposalId)) {
      queue.update(
        proposalId,
        queue.getValue(proposalId).sub(voter.upvote.weight),
        lesser,
        greater
      );
      emit ProposalUpvoteRevoked(proposalId, account, voter.upvote.weight);
    }
    voter.upvote = UpvoteRecord(0, 0);
    return true;
  }

  /**
   * @notice Approves a proposal in the approval stage.
   * @param proposalId The ID of the proposal to approve.
   * @param index The index of the proposal ID in `dequeued`.
   * @return Whether or not the approval was made successfully.
   */
  function approve(uint256 proposalId, uint256 index) external onlyApprover returns (bool) {
    dequeueProposalsIfReady();
    (Proposals.Proposal storage proposal, Proposals.Stage stage) = requireDequeuedAndDeleteExpired(
      proposalId,
      index
    );
    if (!proposal.exists()) {
      return false;
    }

    require(!proposal.isApproved(), "Proposal already approved");
    require(
      stage == Proposals.Stage.Referendum || stage == Proposals.Stage.Execution,
      "Proposal not in correct stage"
    );
    proposal.approved = true;
    // Ensures networkWeight is set by the end of the Referendum stage, even if 0 votes are cast.
    proposal.networkWeight = getLockedGold().getTotalLockedGold();
    emit ProposalApproved(proposalId);
    return true;
  }

  /**
   * @notice Votes on a proposal in the referendum stage.
   * @param proposalId The ID of the proposal to vote on.
   * @param index The index of the proposal ID in `dequeued`.
   * @param value Whether to vote yes, no, or abstain.
   * @return Whether or not the vote was cast successfully.
   */
  /* solhint-disable code-complexity */
  function vote(uint256 proposalId, uint256 index, Proposals.VoteValue value)
    external
    nonReentrant
    returns (bool)
  {
    dequeueProposalsIfReady();
    (Proposals.Proposal storage proposal, Proposals.Stage stage) = requireDequeuedAndDeleteExpired(
      proposalId,
      index
    );
    if (!proposal.exists()) {
      return false;
    }

    require(stage == Proposals.Stage.Referendum, "Incorrect proposal state");
    require(value != Proposals.VoteValue.None, "Vote value unset");

    address account = getAccounts().voteSignerToAccount(msg.sender);
    uint256 weight = getLockedGold().getAccountTotalGovernanceVotingPower(account);
    require(weight != 0, "Voter weight zero");

    _vote(
      proposal,
      proposalId,
      index,
      account,
      value == Proposals.VoteValue.Yes ? weight : 0,
      value == Proposals.VoteValue.No ? weight : 0,
      value == Proposals.VoteValue.Abstain ? weight : 0
    );
    return true;
  }

  /**
   * @notice Votes partially on a proposal in the referendum stage.
   * @param proposalId The ID of the proposal to vote on.
   * @param index The index of the proposal ID in `dequeued`.
   * @param yesVotes The yes votes weight.
   * @param noVotes The no votes weight.
   * @param abstainVotes The abstain votes weight.
   * @return Whether or not the vote was cast successfully.
   */
  /* solhint-disable code-complexity */
  function votePartially(
    uint256 proposalId,
    uint256 index,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  ) external nonReentrant returns (bool) {
    dequeueProposalsIfReady();
    (Proposals.Proposal storage proposal, Proposals.Stage stage) = requireDequeuedAndDeleteExpired(
      proposalId,
      index
    );
    if (!proposal.exists()) {
      return false;
    }

    require(stage == Proposals.Stage.Referendum, "Incorrect proposal state");

    address account = getAccounts().voteSignerToAccount(msg.sender);
    uint256 totalVotingPower = getLockedGold().getAccountTotalGovernanceVotingPower(account);

    require(
      totalVotingPower >= yesVotes.add(noVotes).add(abstainVotes),
      "Voter doesn't have enough locked Celo (formerly known as Celo Gold)"
    );
    _vote(proposal, proposalId, index, account, yesVotes, noVotes, abstainVotes);

    return true;
  }

  /**
   * @notice Votes on a proposal in the referendum stage.
   * @param proposal The proposal struct.
   * @param proposalId The ID of the proposal to vote on.
   * @param index The index of the proposal ID in `dequeued`.
   * @param account Account based on signer.
   * @param yesVotes The yes votes weight.
   * @param noVotes The no votes weight.
   * @param abstainVotes The abstain votes weight.
   * @return Whether or not the proposal is passing.
   */
  function _vote(
    Proposals.Proposal storage proposal,
    uint256 proposalId,
    uint256 index,
    address account,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  ) private {
    Voter storage voter = voters[account];

    VoteRecord storage previousVoteRecord = voter.referendumVotes[index];

    if (previousVoteRecord.proposalId != proposalId) {
      // VoteRecord is being stored based on index (in `dequeued`) rather than proposalId.
      // It can happen that user voted on proposal that later gets deleted.
      // VoteRecord will still stay in `referendumVotes` mapping.
      // Once new proposal is created it might get same index as previous proposal.
      // In such case we need to check whether existing VoteRecord is relevant to new
      // proposal of whether it is just left over data.
      proposal.updateVote(0, 0, 0, yesVotes, noVotes, abstainVotes);
    } else if (previousVoteRecord.deprecated_weight != 0) {
      // backward compatibility for transition period - this should be deleted later on
      proposal.updateVote(
        previousVoteRecord.deprecated_value == Proposals.VoteValue.Yes
          ? previousVoteRecord.deprecated_weight
          : 0,
        previousVoteRecord.deprecated_value == Proposals.VoteValue.No
          ? previousVoteRecord.deprecated_weight
          : 0,
        previousVoteRecord.deprecated_value == Proposals.VoteValue.Abstain
          ? previousVoteRecord.deprecated_weight
          : 0,
        yesVotes,
        noVotes,
        abstainVotes
      );
    } else {
      proposal.updateVote(
        previousVoteRecord.yesVotes,
        previousVoteRecord.noVotes,
        previousVoteRecord.abstainVotes,
        yesVotes,
        noVotes,
        abstainVotes
      );
    }

    proposal.networkWeight = getLockedGold().getTotalLockedGold();
    voter.referendumVotes[index] = VoteRecord(
      Proposals.VoteValue.None,
      proposalId,
      0,
      yesVotes,
      noVotes,
      abstainVotes
    );
    if (proposal.timestamp > proposals[voter.mostRecentReferendumProposal].timestamp) {
      voter.mostRecentReferendumProposal = proposalId;
    }

    emit ProposalVotedV2(proposalId, account, yesVotes, noVotes, abstainVotes);
  }

  /* solhint-enable code-complexity */

  /**
   * @notice Revoke votes on all proposals of sender in the referendum stage.
   * @return Whether or not all votes of an account were successfully revoked.
   */
  function revokeVotes() external nonReentrant returns (bool) {
    address account = getAccounts().voteSignerToAccount(msg.sender);
    Voter storage voter = voters[account];
    for (
      uint256 dequeueIndex = 0;
      dequeueIndex < dequeued.length;
      dequeueIndex = dequeueIndex.add(1)
    ) {
      VoteRecord storage voteRecord = voter.referendumVotes[dequeueIndex];

      // Skip proposals where there was no vote cast by the user AND
      // ensure vote record proposal matches identifier of dequeued index proposal.
      if (
        voteRecord.proposalId == dequeued[dequeueIndex] &&
        (voteRecord.yesVotes != 0 ||
          voteRecord.noVotes != 0 ||
          voteRecord.abstainVotes != 0 ||
          voteRecord.deprecated_weight != 0)
      ) {
        (Proposals.Proposal storage proposal, Proposals.Stage stage) =
          requireDequeuedAndDeleteExpired(voteRecord.proposalId, dequeueIndex); // prettier-ignore

        // only revoke from proposals which are still in referendum
        if (stage == Proposals.Stage.Referendum) {
          if (voteRecord.deprecated_weight != 0) {
            // backward compatibility for transition period - this should be deleted later on
            uint256 previousYes = voteRecord.deprecated_value == Proposals.VoteValue.Yes
              ? voteRecord.deprecated_weight
              : 0;
            uint256 previousNo = voteRecord.deprecated_value == Proposals.VoteValue.No
              ? voteRecord.deprecated_weight
              : 0;
            uint256 previousAbstain = voteRecord.deprecated_value == Proposals.VoteValue.Abstain
              ? voteRecord.deprecated_weight
              : 0;
            proposal.updateVote(previousYes, previousNo, previousAbstain, 0, 0, 0);

            proposal.networkWeight = getLockedGold().getTotalLockedGold();
            emit ProposalVoteRevokedV2(
              voteRecord.proposalId,
              account,
              previousYes,
              previousNo,
              previousAbstain
            );
          } else {
            proposal.updateVote(
              voteRecord.yesVotes,
              voteRecord.noVotes,
              voteRecord.abstainVotes,
              0,
              0,
              0
            );
            proposal.networkWeight = getLockedGold().getTotalLockedGold();
            emit ProposalVoteRevokedV2(
              voteRecord.proposalId,
              account,
              voteRecord.yesVotes,
              voteRecord.noVotes,
              voteRecord.abstainVotes
            );
          }
        }

        // always delete dequeue vote records for gas refund as they must be expired or revoked
        delete voter.referendumVotes[dequeueIndex];
      }
    }

    // reset most recent referendum proposal ID to guarantee isVotingReferendum == false
    voter.mostRecentReferendumProposal = 0;
    return true;
  }

  /**
   * @notice Executes a proposal in the execution stage, removing it from `dequeued`.
   * @param proposalId The ID of the proposal to vote on.
   * @param index The index of the proposal ID in `dequeued`.
   * @return Whether or not the proposal was executed successfully.
   * @dev Does not remove the proposal if the execution fails.
   */
  function execute(uint256 proposalId, uint256 index) external nonReentrant returns (bool) {
    dequeueProposalsIfReady();
    (Proposals.Proposal storage proposal, Proposals.Stage stage) = requireDequeuedAndDeleteExpired(
      proposalId,
      index
    );
    bool notExpired = proposal.exists();
    if (notExpired) {
      require(proposal.isApproved(), "Proposal not approved");
      require(
        stage == Proposals.Stage.Execution && _isProposalPassing(proposal),
        "Proposal not in execution stage or not passing"
      );
      proposal.execute();
      emit ProposalExecuted(proposalId);
      deleteDequeuedProposal(proposal, proposalId, index);
    }
    return notExpired;
  }

  /**
   * @notice Approves the hash of a hotfix transaction(s).
   * @param hash The abi encoded keccak256 hash of the hotfix transaction(s) to be approved.
   */
  function approveHotfix(bytes32 hash) external hotfixNotExecuted(hash) onlyApprover {
    hotfixes[hash].approved = true;
    emit HotfixApproved(hash);
  }

  /**
   * @notice Returns whether given hotfix hash has been whitelisted by given address.
   * @param hash The abi encoded keccak256 hash of the hotfix transaction(s) to be whitelisted.
   * @param whitelister Address to check whitelist status of.
   */
  function isHotfixWhitelistedBy(bytes32 hash, address whitelister) public view returns (bool) {
    return hotfixes[hash].whitelisted[whitelister];
  }

  /**
   * @notice Whitelists the hash of a hotfix transaction(s).
   * @param hash The abi encoded keccak256 hash of the hotfix transaction(s) to be whitelisted.
   */
  function whitelistHotfix(bytes32 hash) external hotfixNotExecuted(hash) {
    hotfixes[hash].whitelisted[msg.sender] = true;
    emit HotfixWhitelisted(hash, msg.sender);
  }

  /**
   * @notice Gives hotfix a prepared epoch for execution.
   * @param hash The hash of the hotfix to be prepared.
   */
  function prepareHotfix(bytes32 hash) external hotfixNotExecuted(hash) {
    require(isHotfixPassing(hash), "hotfix not whitelisted by 2f+1 validators");
    uint256 epoch = getEpochNumber();
    require(hotfixes[hash].preparedEpoch < epoch, "hotfix already prepared for this epoch");
    hotfixes[hash].preparedEpoch = epoch;
    emit HotfixPrepared(hash, epoch);
  }

  /**
   * @notice Executes a whitelisted proposal.
   * @param values The values of CELO to be sent in the proposed transactions.
   * @param destinations The destination addresses of the proposed transactions.
   * @param data The concatenated data to be included in the proposed transactions.
   * @param dataLengths The lengths of each transaction's data.
   * @param salt Arbitrary salt associated with hotfix which guarantees uniqueness of hash.
   * @dev Reverts if hotfix is already executed, not approved, or not prepared for current epoch.
   */
  function executeHotfix(
    uint256[] calldata values,
    address[] calldata destinations,
    bytes calldata data,
    uint256[] calldata dataLengths,
    bytes32 salt
  ) external {
    bytes32 hash = keccak256(abi.encode(values, destinations, data, dataLengths, salt));

    (bool approved, bool executed, uint256 preparedEpoch) = getHotfixRecord(hash);
    require(!executed, "hotfix already executed");
    require(approved, "hotfix not approved");
    require(preparedEpoch == getEpochNumber(), "hotfix must be prepared for this epoch");

    Proposals.makeMem(values, destinations, data, dataLengths, msg.sender, 0).executeMem();

    hotfixes[hash].executed = true;
    emit HotfixExecuted(hash);
  }

  /**
   * @notice Withdraws refunded CELO deposits.
   * @return Whether or not the withdraw was successful.
   */
  function withdraw() external nonReentrant returns (bool) {
    uint256 value = refundedDeposits[msg.sender];
    require(value != 0, "Nothing to withdraw");
    require(value <= address(this).balance, "Inconsistent balance");
    refundedDeposits[msg.sender] = 0;
    msg.sender.sendValue(value);
    return true;
  }

  /**
   * @notice Returns whether or not a particular account is voting on proposals.
   * @param account The address of the account.
   * @return Whether or not the account is voting on proposals.
   */
  function isVoting(address account) external view returns (bool) {
    Voter storage voter = voters[account];
    uint256 upvotedProposal = voter.upvote.proposalId;
    bool isVotingQueue = upvotedProposal != 0 &&
      isQueued(upvotedProposal) &&
      !isQueuedProposalExpired(upvotedProposal);
    Proposals.Proposal storage proposal = proposals[voter.mostRecentReferendumProposal];
    bool isVotingReferendum = (getProposalDequeuedStage(proposal) == Proposals.Stage.Referendum);
    return isVotingQueue || isVotingReferendum;
  }

  /**
   * @notice Returns the number of seconds proposals stay in the referendum stage.
   * @return The number of seconds proposals stay in the referendum stage.
   */
  function getReferendumStageDuration() external view returns (uint256) {
    return stageDurations.referendum;
  }

  /**
   * @notice Returns the number of seconds proposals stay in the execution stage.
   * @return The number of seconds proposals stay in the execution stage.
   */
  function getExecutionStageDuration() external view returns (uint256) {
    return stageDurations.execution;
  }

  /**
   * @notice Returns the participation parameters.
   * @return baseline The participation baseline parameter.
   * @return baselineFloor The participation baseline floor parameter.
   * @return baselineUpdateFactor The participation baseline update factor parameter.
   * @return baselineQuorumFactor The participation baseline quorum factor parameter.
   */
  function getParticipationParameters() external view returns (uint256, uint256, uint256, uint256) {
    return (
      participationParameters.baseline.unwrap(),
      participationParameters.baselineFloor.unwrap(),
      participationParameters.baselineUpdateFactor.unwrap(),
      participationParameters.baselineQuorumFactor.unwrap()
    );
  }

  /**
   * @notice Returns whether or not a proposal exists.
   * @param proposalId The ID of the proposal.
   * @return Whether or not the proposal exists.
   */
  function proposalExists(uint256 proposalId) external view returns (bool) {
    return proposals[proposalId].exists();
  }

  /**
   * @notice Returns an unpacked proposal struct with its transaction count.
   * @param proposalId The ID of the proposal to unpack.
   * @return proposer
   * @return deposit
   * @return timestamp
   * @return transaction Transaction count.
   * @return description Description url.
   */
  function getProposal(uint256 proposalId)
    external
    view
    returns (address, uint256, uint256, uint256, string memory, uint256, bool)
  {
    return proposals[proposalId].unpack();
  }

  /**
   * @notice Returns a specified transaction in a proposal.
   * @param proposalId The ID of the proposal to query.
   * @param index The index of the specified transaction in the proposal's transaction list.
   * @return value Transaction value.
   * @return destination Transaction destination.
   * @return data Transaction data.
   */
  function getProposalTransaction(uint256 proposalId, uint256 index)
    external
    view
    returns (uint256, address, bytes memory)
  {
    return proposals[proposalId].getTransaction(index);
  }

  /**
   * @notice Returns whether or not a proposal has been approved.
   * @param proposalId The ID of the proposal.
   * @return Whether or not the proposal has been approved.
   */
  function isApproved(uint256 proposalId) external view returns (bool) {
    return proposals[proposalId].isApproved();
  }

  /**
   * @notice Returns the referendum vote totals for a proposal.
   * @param proposalId The ID of the proposal.
   * @return yes The yes vote totals.
   * @return no The no vote totals.
   * @return abstain The abstain vote totals.
   */
  function getVoteTotals(uint256 proposalId) external view returns (uint256, uint256, uint256) {
    return proposals[proposalId].getVoteTotals();
  }

  /**
   * @notice Returns an accounts vote record on a particular index in `dequeued`.
   * @param account The address of the account to get the record for.
   * @param index The index in `dequeued`.
   * @return The corresponding proposal ID, vote value, and weight.
   * @return The depreciated vote value.
   * @return The deprecieated weight.
   * @return The yes weight.
   * @return The no weight.
   * @return The abstain weight.
   */
  function getVoteRecord(address account, uint256 index)
    external
    view
    returns (uint256, uint256, uint256, uint256, uint256, uint256)
  {
    VoteRecord storage record = voters[account].referendumVotes[index];
    return (
      record.proposalId,
      uint256(record.deprecated_value),
      record.deprecated_weight,
      record.yesVotes,
      record.noVotes,
      record.abstainVotes
    );
  }

  /**
   * @notice Returns the number of proposals in the queue.
   * @return The number of proposals in the queue.
   */
  function getQueueLength() external view returns (uint256) {
    return queue.list.numElements;
  }

  /**
   * @notice Returns the number of upvotes the queued proposal has received.
   * @param proposalId The ID of the proposal.
   * @return The number of upvotes a queued proposal has received.
   */
  function getUpvotes(uint256 proposalId) external view returns (uint256) {
    require(isQueued(proposalId), "Proposal not queued");
    return queue.getValue(proposalId);
  }

  /**
   * @notice Returns the proposal ID and upvote total for all queued proposals.
   * @return proposalID The proposal ID for all queued proposals.
   * @return total The upvote total for all queued proposals.
   * @dev Note that this includes expired proposals that have yet to be removed from the queue.
   */
  function getQueue() external view returns (uint256[] memory, uint256[] memory) {
    return queue.getElements();
  }

  /**
   * @notice Returns the dequeued proposal IDs.
   * @return The dequeued proposal IDs.
   * @dev Note that this includes unused indices with proposalId == 0 from deleted proposals.
   */
  function getDequeue() external view returns (uint256[] memory) {
    return dequeued;
  }

  /**
   * @notice Returns the ID of the proposal upvoted by `account` and the weight of that upvote.
   * @param account The address of the account.
   * @return The ID of the proposal upvoted by `account`.
   * @return The weight of that upvote.
   */
  function getUpvoteRecord(address account) external view returns (uint256, uint256) {
    UpvoteRecord memory upvoteRecord = voters[account].upvote;
    return (upvoteRecord.proposalId, upvoteRecord.weight);
  }

  /**
   * @notice Returns the ID of the most recently dequeued proposal voted on by `account`.
   * @param account The address of the account.
   * @return The ID of the most recently dequeued proposal voted on by `account`..
   */
  function getMostRecentReferendumProposal(address account) external view returns (uint256) {
    return voters[account].mostRecentReferendumProposal;
  }

  /**
   * @notice Returns number of validators from current set which have whitelisted the given hotfix.
   * @param hash The abi encoded keccak256 hash of the hotfix transaction.
   * @return Whitelist tally
   */
  function hotfixWhitelistValidatorTally(bytes32 hash) public view returns (uint256) {
    uint256 tally = 0;
    uint256 n = numberValidatorsInCurrentSet();
    IAccounts accounts = getAccounts();
    for (uint256 i = 0; i < n; i = i.add(1)) {
      address validatorSigner = validatorSignerAddressFromCurrentSet(i);
      address validatorAccount = accounts.signerToAccount(validatorSigner);
      if (
        isHotfixWhitelistedBy(hash, validatorSigner) ||
        isHotfixWhitelistedBy(hash, validatorAccount)
      ) {
        tally = tally.add(1);
      }
    }
    return tally;
  }

  /**
   * @notice Checks if a byzantine quorum of validators has whitelisted the given hotfix.
   * @param hash The abi encoded keccak256 hash of the hotfix transaction.
   * @return Whether validator whitelist tally >= validator byzantine quorum
   */
  function isHotfixPassing(bytes32 hash) public view returns (bool) {
    return hotfixWhitelistValidatorTally(hash) >= minQuorumSizeInCurrentSet();
  }

  /**
   * @notice Gets information about a hotfix.
   * @param hash The abi encoded keccak256 hash of the hotfix transaction.
   * @return Hotfix approved.
   * @return Hotfix executed.
   * @return Hotfix preparedEpoch.
   */
  function getHotfixRecord(bytes32 hash) public view returns (bool, bool, uint256) {
    return (hotfixes[hash].approved, hotfixes[hash].executed, hotfixes[hash].preparedEpoch);
  }

  /**
   * @notice Removes the proposals with the most upvotes from the queue, moving them to the
   *   approval stage.
   * @dev If any of the top proposals have expired, they are deleted.
   */
  function dequeueProposalsIfReady() public {
    // solhint-disable-next-line not-rely-on-time
    if (now >= lastDequeue.add(dequeueFrequency)) {
      uint256 numProposalsToDequeue = Math.min(concurrentProposals, queue.list.numElements);
      uint256[] memory dequeuedIds = queue.popN(numProposalsToDequeue);

      bool wasAnyProposalDequeued = false;
      for (uint256 i = 0; i < numProposalsToDequeue; i = i.add(1)) {
        uint256 proposalId = dequeuedIds[i];
        Proposals.Proposal storage proposal = proposals[proposalId];
        if (_isQueuedProposalExpired(proposal)) {
          emit ProposalExpired(proposalId);
          continue;
        }
        refundedDeposits[proposal.proposer] = refundedDeposits[proposal.proposer].add(
          proposal.deposit
        );
        // solhint-disable-next-line not-rely-on-time
        proposal.timestamp = now;
        if (emptyIndices.length != 0) {
          uint256 indexOfLastEmptyIndex = emptyIndices.length.sub(1);
          dequeued[emptyIndices[indexOfLastEmptyIndex]] = proposalId;
          delete emptyIndices[indexOfLastEmptyIndex];
          emptyIndices.length = indexOfLastEmptyIndex;
        } else {
          dequeued.push(proposalId);
        }
        // solhint-disable-next-line not-rely-on-time
        emit ProposalDequeued(proposalId, now);
        wasAnyProposalDequeued = true;
      }
      if (wasAnyProposalDequeued) {
        // solhint-disable-next-line not-rely-on-time
        lastDequeue = now;
      }
    }
  }

  /**
   * @notice Returns whether or not a proposal is in the queue.
   * @dev NOTE: proposal may be expired
   * @param proposalId The ID of the proposal.
   * @return Whether or not the proposal is in the queue.
   */
  function isQueued(uint256 proposalId) public view returns (bool) {
    return queue.contains(proposalId);
  }

  /**
   * @notice Returns whether or not a particular proposal is passing according to the constitution
   *   and the participation levels.
   * @param proposalId The ID of the proposal.
   * @return Whether or not the proposal is passing.
   */
  function isProposalPassing(uint256 proposalId) external view returns (bool) {
    return _isProposalPassing(proposals[proposalId]);
  }

  /**
   * @notice Returns whether or not a particular proposal is passing according to the constitution
   *   and the participation levels.
   * @param proposal The proposal struct.
   * @return Whether or not the proposal is passing.
   */
  function _isProposalPassing(Proposals.Proposal storage proposal) private view returns (bool) {
    FixidityLib.Fraction memory support = proposal.getSupportWithQuorumPadding(
      participationParameters.baseline.multiply(participationParameters.baselineQuorumFactor)
    );

    if (proposal.transactions.length == 0) {
      // default treshold
      FixidityLib.Fraction memory threshold = _getConstitution(address(0), "");
      return support.gt(threshold);
    }

    for (uint256 i = 0; i < proposal.transactions.length; i = i.add(1)) {
      bytes4 functionId = ExtractFunctionSignature.extractFunctionSignature(
        proposal.transactions[i].data
      );
      FixidityLib.Fraction memory threshold = _getConstitution(
        proposal.transactions[i].destination,
        functionId
      );
      if (support.lte(threshold)) {
        return false;
      }
    }
    return true;
  }

  /**
   * @notice Returns whether a proposal is dequeued at the given index.
   * @param proposalId The ID of the proposal.
   * @param index The index of the proposal ID in `dequeued`.
   * @return Whether the proposal is in `dequeued`.
   */
  function isDequeuedProposal(uint256 proposalId, uint256 index) external view returns (bool) {
    return _isDequeuedProposal(proposals[proposalId], proposalId, index);
  }

  /**
   * @notice Returns whether a proposal is dequeued at the given index.
   * @param proposal The proposal struct.
   * @param proposalId The ID of the proposal.
   * @param index The index of the proposal ID in `dequeued`.
   * @return Whether the proposal is in `dequeued` at index.
   */
  function _isDequeuedProposal(
    Proposals.Proposal storage proposal,
    uint256 proposalId,
    uint256 index
  ) private view returns (bool) {
    require(index < dequeued.length, "Provided index greater than dequeue length.");
    return proposal.exists() && dequeued[index] == proposalId;
  }

  /**
   * @notice Returns whether or not a dequeued proposal has expired.
   * @param proposalId The ID of the proposal.
   * @return Whether or not the dequeued proposal has expired.
   */
  function isDequeuedProposalExpired(uint256 proposalId) external view returns (bool) {
    Proposals.Proposal storage proposal = proposals[proposalId];
    return _isDequeuedProposalExpired(proposal, getProposalDequeuedStage(proposal));
  }

  /**
   * @notice Returns whether or not a dequeued proposal has expired.
   * @param proposal The proposal struct.
   * @return Whether or not the dequeued proposal has expired.
   */
  function _isDequeuedProposalExpired(Proposals.Proposal storage proposal, Proposals.Stage stage)
    private
    view
    returns (bool)
  {
    // The proposal is considered expired under the following conditions:
    //   1. Past the referendum stage and not passing.
    //   2. Past the execution stage.
    return ((stage > Proposals.Stage.Execution) ||
      (stage > Proposals.Stage.Referendum && !_isProposalPassing(proposal)));
  }

  /**
   * @notice Returns whether or not a queued proposal has expired.
   * @param proposalId The ID of the proposal.
   * @return Whether or not the dequeued proposal has expired.
   */
  function isQueuedProposalExpired(uint256 proposalId) public view returns (bool) {
    return _isQueuedProposalExpired(proposals[proposalId]);
  }

  /**
   * @notice Returns whether or not a queued proposal has expired.
   * @param proposal The proposal struct.
   * @return Whether or not the dequeued proposal has expired.
   */
  function _isQueuedProposalExpired(Proposals.Proposal storage proposal)
    private
    view
    returns (bool)
  {
    // solhint-disable-next-line not-rely-on-time
    return now >= proposal.timestamp.add(queueExpiry);
  }

  /**
   * @notice Deletes a dequeued proposal.
   * @param proposal The proposal struct.
   * @param proposalId The ID of the proposal to delete.
   * @param index The index of the proposal ID in `dequeued`.
   * @dev Must always be preceded by `isDequeuedProposal`, which checks `index`.
   */
  function deleteDequeuedProposal(
    Proposals.Proposal storage proposal,
    uint256 proposalId,
    uint256 index
  ) private {
    if (proposal.isApproved() && proposal.networkWeight != 0) {
      updateParticipationBaseline(proposal);
    }
    dequeued[index] = 0;
    emptyIndices.push(index);
    delete proposals[proposalId];
  }

  /**
   * @notice Updates the participation baseline based on the proportion of BondedDeposit weight
   *   that participated in the proposal's Referendum stage.
   * @param proposal The proposal struct.
   */
  function updateParticipationBaseline(Proposals.Proposal storage proposal) private {
    FixidityLib.Fraction memory participation = proposal.getParticipation();
    FixidityLib.Fraction memory participationComponent = participation.multiply(
      participationParameters.baselineUpdateFactor
    );
    FixidityLib.Fraction memory baselineComponent = participationParameters.baseline.multiply(
      FixidityLib.fixed1().subtract(participationParameters.baselineUpdateFactor)
    );
    participationParameters.baseline = participationComponent.add(baselineComponent);
    if (participationParameters.baseline.lt(participationParameters.baselineFloor)) {
      participationParameters.baseline = participationParameters.baselineFloor;
    }
    emit ParticipationBaselineUpdated(participationParameters.baseline.unwrap());
  }

  /**
   * @notice Returns the constitution for a particular destination and function ID.
   * @param destination The destination address to get the constitution for.
   * @param functionId The function ID to get the constitution for, zero for the destination
   *   default.
   * @return The ratio of yes:no votes needed to exceed in order to pass the proposal.
   */
  function getConstitution(address destination, bytes4 functionId) external view returns (uint256) {
    return _getConstitution(destination, functionId).unwrap();
  }

  function _getConstitution(address destination, bytes4 functionId)
    internal
    view
    returns (FixidityLib.Fraction memory)
  {
    // Default to a simple majority.
    FixidityLib.Fraction memory threshold = FixidityLib.wrap(FIXED_HALF);
    if (constitution[destination].functionThresholds[functionId].unwrap() != 0) {
      threshold = constitution[destination].functionThresholds[functionId];
    } else if (constitution[destination].defaultThreshold.unwrap() != 0) {
      threshold = constitution[destination].defaultThreshold;
    }
    return threshold;
  }

  /**
   * @notice Returns max number of votes cast by an account.
   * @param account The address of the account.
   * @return The total number of votes cast by an account.
   */
  function getAmountOfGoldUsedForVoting(address account) public view returns (uint256) {
    Voter storage voter = voters[account];

    uint256 upvotedProposalId = voter.upvote.proposalId;
    bool isVotingQueue = upvotedProposalId != 0 &&
      isQueued(upvotedProposalId) &&
      !isQueuedProposalExpired(upvotedProposalId);

    if (isVotingQueue) {
      uint256 weight = getLockedGold().getAccountTotalLockedGold(account);
      return weight;
    }

    uint256 maxUsed = 0;
    for (uint256 index = 0; index < dequeued.length; index = index.add(1)) {
      uint256 proposalId = dequeued[index];
      Proposals.Proposal storage proposal = proposals[proposalId];
      bool isVotingReferendum = (getProposalDequeuedStage(proposal) == Proposals.Stage.Referendum);

      if (!isVotingReferendum) {
        continue;
      }

      VoteRecord storage voteRecord = voter.referendumVotes[index];
      // skip if vote record is not for this proposal
      if (voteRecord.proposalId != proposalId) {
        continue;
      }

      uint256 votesCast = voteRecord.yesVotes.add(voteRecord.noVotes).add(voteRecord.abstainVotes);
      maxUsed = Math.max(
        maxUsed,
        // backward compatibility for transition period - this should be updated later on
        votesCast == 0 ? voteRecord.deprecated_weight : votesCast
      );
    }
    return maxUsed;
  }

  /**
   * @notice When delegator removes votes from delegatee during the time when delegator is voting
   * for governance proposal, this method will remove votes from voted proposal proportionally.
   * @param account The address of the account.
   * @param newVotingPower The adjusted voting power of delegatee.
   */
  function removeVotesWhenRevokingDelegatedVotes(address account, uint256 newVotingPower)
    public
    onlyLockedGold
  {
    _removeVotesWhenRevokingDelegatedVotes(account, newVotingPower);
  }

  /**
   * @notice When delegator removes votes from delegatee during the time when delegator is voting
   * for governance proposal, this method will remove votes from voted proposal proportionally.
   * @param account The address of the account.
   * @param newVotingPower The adjusted voting power of delegatee.
   */
  function _removeVotesWhenRevokingDelegatedVotes(address account, uint256 newVotingPower)
    internal
  {
    Voter storage voter = voters[account];

    for (uint256 index = 0; index < dequeued.length; index = index.add(1)) {
      uint256 proposalId = dequeued[index];
      Proposals.Proposal storage proposal = proposals[proposalId];
      bool isVotingReferendum = (getProposalDequeuedStage(proposal) == Proposals.Stage.Referendum);

      if (!isVotingReferendum) {
        continue;
      }

      VoteRecord storage voteRecord = voter.referendumVotes[index];

      // skip if vote record is not for this proposal
      if (voteRecord.proposalId != proposalId) {
        delete voter.referendumVotes[index];
        continue;
      }

      uint256 sumOfVotes = voteRecord.yesVotes.add(voteRecord.noVotes).add(voteRecord.abstainVotes);

      if (sumOfVotes > newVotingPower) {
        uint256 toRemove = sumOfVotes.sub(newVotingPower);

        uint256 abstainToRemove = getVotesPortion(toRemove, voteRecord.abstainVotes, sumOfVotes);
        uint256 yesToRemove = getVotesPortion(toRemove, voteRecord.yesVotes, sumOfVotes);
        uint256 noToRemove = getVotesPortion(toRemove, voteRecord.noVotes, sumOfVotes);

        uint256 totalRemoved = abstainToRemove.add(yesToRemove).add(noToRemove);

        uint256 yesVotes = voteRecord.yesVotes.sub(yesToRemove);
        uint256 noVotes = voteRecord.noVotes.sub(noToRemove);
        uint256 abstainVotes = voteRecord.abstainVotes.sub(abstainToRemove);

        if (totalRemoved < toRemove) {
          // in case of rounding error
          uint256 roundingToRemove = toRemove.sub(totalRemoved);

          uint256 toRemoveRounding = Math.min(roundingToRemove, yesVotes);
          yesVotes = yesVotes.sub(toRemoveRounding);
          roundingToRemove = roundingToRemove.sub(toRemoveRounding);

          if (roundingToRemove != 0) {
            toRemoveRounding = Math.min(roundingToRemove, noVotes);
            noVotes = noVotes.sub(toRemoveRounding);
            roundingToRemove = roundingToRemove.sub(toRemoveRounding);
          }

          if (roundingToRemove != 0) {
            toRemoveRounding = Math.min(roundingToRemove, abstainVotes);
            abstainVotes = abstainVotes.sub(toRemoveRounding);
          }
        }

        proposal.updateVote(
          voteRecord.yesVotes,
          voteRecord.noVotes,
          voteRecord.abstainVotes,
          yesVotes,
          noVotes,
          abstainVotes
        );

        voteRecord.abstainVotes = abstainVotes;
        voteRecord.yesVotes = yesVotes;
        voteRecord.noVotes = noVotes;
      }
    }
  }

  /**
   * Returns amount of votes that should be removed from delegatee's proposal voting.
   * @param totalToRemove Total votes to be removed.
   * @param votes Yes/no/abstrain votes
   * @param sumOfAllVotes Sum of yes, no, and abstain votes.
   */
  function getVotesPortion(uint256 totalToRemove, uint256 votes, uint256 sumOfAllVotes)
    private
    pure
    returns (uint256)
  {
    return
      FixidityLib
        .newFixed(totalToRemove)
        .multiply(FixidityLib.newFixedFraction(votes, sumOfAllVotes))
        .fromFixed();
  }

  /**
   * @param values The values of CELO to be sent in the proposed transactions.
   * @param destinations The destination addresses of the proposed transactions.
   * @param data The concatenated data to be included in the proposed transactions.
   * @param dataLengths The lengths of each transaction's data.
   * @param salt Arbitrary salt associated with hotfix which guarantees uniqueness of hash.
   * @return The hash of the hotfix.
   */
  function getHotfixHash(
    uint256[] calldata values,
    address[] calldata destinations,
    bytes calldata data,
    uint256[] calldata dataLengths,
    bytes32 salt
  ) external pure returns (bytes32) {
    return keccak256(abi.encode(values, destinations, data, dataLengths, salt));
  }

  /**
   * @notice Returns the stage of a dequeued proposal.
   * @param proposal The proposal struct.
   * @return The stage of the dequeued proposal.
   * @dev Must be called on a dequeued proposal.
   */
  function getProposalDequeuedStage(Proposals.Proposal storage proposal)
    internal
    view
    returns (Proposals.Stage)
  {
    uint256 stageStartTime = proposal.timestamp.add(stageDurations.referendum).add(
      stageDurations.execution
    );
    // solhint-disable-next-line not-rely-on-time
    if (
      now >= stageStartTime &&
      (proposal.transactions.length != 0 ||
        // proposals with 0 transactions can expire only when not approved or not passing
        !proposal.isApproved() ||
        !_isProposalPassing(proposal))
    ) {
      return Proposals.Stage.Expiration;
    }
    stageStartTime = stageStartTime.sub(stageDurations.execution);
    // solhint-disable-next-line not-rely-on-time
    if (now >= stageStartTime) {
      return Proposals.Stage.Execution;
    }
    return Proposals.Stage.Referendum;
  }
}
        

pragma solidity ^0.5.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }
    // solhint-disable-previous-line no-empty-blocks

    function _msgSender() internal view returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
          

pragma solidity ^0.5.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}
          

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     *
     * _Available since v2.4.0._
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
          

pragma solidity ^0.5.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Returns true if the caller is the current owner.
     */
    function isOwner() public view returns (bool) {
        return _msgSender() == _owner;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
          

pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP. Does not include
 * the optional functions; to access them see {ERC20Detailed}.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
          

pragma solidity ^0.5.5;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following 
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     *
     * _Available since v2.4.0._
     */
    function toPayable(address account) internal pure returns (address payable) {
        return address(uint160(account));
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     *
     * _Available since v2.4.0._
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-call-value
        (bool success, ) = recipient.call.value(amount)("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}
          

pragma solidity ^0.5.13;

library ExtractFunctionSignature {
  /**
   * @notice Extracts the first four bytes of a byte array.
   * @param input The byte array.
   * @return The first four bytes of `input`.
   */
  function extractFunctionSignature(bytes memory input) internal pure returns (bytes4) {
    return (bytes4(input[0]) |
      (bytes4(input[1]) >> 8) |
      (bytes4(input[2]) >> 16) |
      (bytes4(input[3]) >> 24));
  }
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

/**
 * @title FixidityLib
 * @author Gadi Guy, Alberto Cuesta Canada
 * @notice This library provides fixed point arithmetic with protection against
 * overflow.
 * All operations are done with uint256 and the operands must have been created
 * with any of the newFrom* functions, which shift the comma digits() to the
 * right and check for limits, or with wrap() which expects a number already
 * in the internal representation of a fraction.
 * When using this library be sure to use maxNewFixed() as the upper limit for
 * creation of fixed point numbers.
 * @dev All contained functions are pure and thus marked internal to be inlined
 * on consuming contracts at compile time for gas efficiency.
 */
library FixidityLib {
  struct Fraction {
    uint256 value;
  }

  /**
   * @notice Number of positions that the comma is shifted to the right.
   */
  function digits() internal pure returns (uint8) {
    return 24;
  }

  uint256 private constant FIXED1_UINT = 1000000000000000000000000;

  /**
   * @notice This is 1 in the fixed point units used in this library.
   * @dev Test fixed1() equals 10^digits()
   * Hardcoded to 24 digits.
   */
  function fixed1() internal pure returns (Fraction memory) {
    return Fraction(FIXED1_UINT);
  }

  /**
   * @notice Wrap a uint256 that represents a 24-decimal fraction in a Fraction
   * struct.
   * @param x Number that already represents a 24-decimal fraction.
   * @return A Fraction struct with contents x.
   */
  function wrap(uint256 x) internal pure returns (Fraction memory) {
    return Fraction(x);
  }

  /**
   * @notice Unwraps the uint256 inside of a Fraction struct.
   */
  function unwrap(Fraction memory x) internal pure returns (uint256) {
    return x.value;
  }

  /**
   * @notice The amount of decimals lost on each multiplication operand.
   * @dev Test mulPrecision() equals sqrt(fixed1)
   */
  function mulPrecision() internal pure returns (uint256) {
    return 1000000000000;
  }

  /**
   * @notice Maximum value that can be converted to fixed point. Optimize for deployment.
   * @dev
   * Test maxNewFixed() equals maxUint256() / fixed1()
   */
  function maxNewFixed() internal pure returns (uint256) {
    return 115792089237316195423570985008687907853269984665640564;
  }

  /**
   * @notice Converts a uint256 to fixed point Fraction
   * @dev Test newFixed(0) returns 0
   * Test newFixed(1) returns fixed1()
   * Test newFixed(maxNewFixed()) returns maxNewFixed() * fixed1()
   * Test newFixed(maxNewFixed()+1) fails
   */
  function newFixed(uint256 x) internal pure returns (Fraction memory) {
    require(x <= maxNewFixed(), "can't create fixidity number larger than maxNewFixed()");
    return Fraction(x * FIXED1_UINT);
  }

  /**
   * @notice Converts a uint256 in the fixed point representation of this
   * library to a non decimal. All decimal digits will be truncated.
   */
  function fromFixed(Fraction memory x) internal pure returns (uint256) {
    return x.value / FIXED1_UINT;
  }

  /**
   * @notice Converts two uint256 representing a fraction to fixed point units,
   * equivalent to multiplying dividend and divisor by 10^digits().
   * @param numerator numerator must be <= maxNewFixed()
   * @param denominator denominator must be <= maxNewFixed() and denominator can't be 0
   * @dev
   * Test newFixedFraction(1,0) fails
   * Test newFixedFraction(0,1) returns 0
   * Test newFixedFraction(1,1) returns fixed1()
   * Test newFixedFraction(1,fixed1()) returns 1
   */
  function newFixedFraction(uint256 numerator, uint256 denominator)
    internal
    pure
    returns (Fraction memory)
  {
    Fraction memory convertedNumerator = newFixed(numerator);
    Fraction memory convertedDenominator = newFixed(denominator);
    return divide(convertedNumerator, convertedDenominator);
  }

  /**
   * @notice Returns the integer part of a fixed point number.
   * @dev
   * Test integer(0) returns 0
   * Test integer(fixed1()) returns fixed1()
   * Test integer(newFixed(maxNewFixed())) returns maxNewFixed()*fixed1()
   */
  function integer(Fraction memory x) internal pure returns (Fraction memory) {
    return Fraction((x.value / FIXED1_UINT) * FIXED1_UINT); // Can't overflow
  }

  /**
   * @notice Returns the fractional part of a fixed point number.
   * In the case of a negative number the fractional is also negative.
   * @dev
   * Test fractional(0) returns 0
   * Test fractional(fixed1()) returns 0
   * Test fractional(fixed1()-1) returns 10^24-1
   */
  function fractional(Fraction memory x) internal pure returns (Fraction memory) {
    return Fraction(x.value - (x.value / FIXED1_UINT) * FIXED1_UINT); // Can't overflow
  }

  /**
   * @notice x+y.
   * @dev The maximum value that can be safely used as an addition operator is defined as
   * maxFixedAdd = maxUint256()-1 / 2, or
   * 57896044618658097711785492504343953926634992332820282019728792003956564819967.
   * Test add(maxFixedAdd,maxFixedAdd) equals maxFixedAdd + maxFixedAdd
   * Test add(maxFixedAdd+1,maxFixedAdd+1) throws
   */
  function add(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) {
    uint256 z = x.value + y.value;
    require(z >= x.value, "add overflow detected");
    return Fraction(z);
  }

  /**
   * @notice x-y.
   * @dev
   * Test subtract(6, 10) fails
   */
  function subtract(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) {
    require(x.value >= y.value, "substraction underflow detected");
    return Fraction(x.value - y.value);
  }

  /**
   * @notice x*y. If any of the operators is higher than the max multiplier value it
   * might overflow.
   * @dev The maximum value that can be safely used as a multiplication operator
   * (maxFixedMul) is calculated as sqrt(maxUint256()*fixed1()),
   * or 340282366920938463463374607431768211455999999999999
   * Test multiply(0,0) returns 0
   * Test multiply(maxFixedMul,0) returns 0
   * Test multiply(0,maxFixedMul) returns 0
   * Test multiply(fixed1()/mulPrecision(),fixed1()*mulPrecision()) returns fixed1()
   * Test multiply(maxFixedMul,maxFixedMul) is around maxUint256()
   * Test multiply(maxFixedMul+1,maxFixedMul+1) fails
   */
  function multiply(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) {
    if (x.value == 0 || y.value == 0) return Fraction(0);
    if (y.value == FIXED1_UINT) return x;
    if (x.value == FIXED1_UINT) return y;

    // Separate into integer and fractional parts
    // x = x1 + x2, y = y1 + y2
    uint256 x1 = integer(x).value / FIXED1_UINT;
    uint256 x2 = fractional(x).value;
    uint256 y1 = integer(y).value / FIXED1_UINT;
    uint256 y2 = fractional(y).value;

    // (x1 + x2) * (y1 + y2) = (x1 * y1) + (x1 * y2) + (x2 * y1) + (x2 * y2)
    uint256 x1y1 = x1 * y1;
    if (x1 != 0) require(x1y1 / x1 == y1, "overflow x1y1 detected");

    // x1y1 needs to be multiplied back by fixed1
    // solium-disable-next-line mixedcase
    uint256 fixed_x1y1 = x1y1 * FIXED1_UINT;
    if (x1y1 != 0) require(fixed_x1y1 / x1y1 == FIXED1_UINT, "overflow x1y1 * fixed1 detected");
    x1y1 = fixed_x1y1;

    uint256 x2y1 = x2 * y1;
    if (x2 != 0) require(x2y1 / x2 == y1, "overflow x2y1 detected");

    uint256 x1y2 = x1 * y2;
    if (x1 != 0) require(x1y2 / x1 == y2, "overflow x1y2 detected");

    x2 = x2 / mulPrecision();
    y2 = y2 / mulPrecision();
    uint256 x2y2 = x2 * y2;
    if (x2 != 0) require(x2y2 / x2 == y2, "overflow x2y2 detected");

    // result = fixed1() * x1 * y1 + x1 * y2 + x2 * y1 + x2 * y2 / fixed1();
    Fraction memory result = Fraction(x1y1);
    result = add(result, Fraction(x2y1)); // Add checks for overflow
    result = add(result, Fraction(x1y2)); // Add checks for overflow
    result = add(result, Fraction(x2y2)); // Add checks for overflow
    return result;
  }

  /**
   * @notice 1/x
   * @dev
   * Test reciprocal(0) fails
   * Test reciprocal(fixed1()) returns fixed1()
   * Test reciprocal(fixed1()*fixed1()) returns 1 // Testing how the fractional is truncated
   * Test reciprocal(1+fixed1()*fixed1()) returns 0 // Testing how the fractional is truncated
   * Test reciprocal(newFixedFraction(1, 1e24)) returns newFixed(1e24)
   */
  function reciprocal(Fraction memory x) internal pure returns (Fraction memory) {
    require(x.value != 0, "can't call reciprocal(0)");
    return Fraction((FIXED1_UINT * FIXED1_UINT) / x.value); // Can't overflow
  }

  /**
   * @notice x/y. If the dividend is higher than the max dividend value, it
   * might overflow. You can use multiply(x,reciprocal(y)) instead.
   * @dev The maximum value that can be safely used as a dividend (maxNewFixed) is defined as
   * divide(maxNewFixed,newFixedFraction(1,fixed1())) is around maxUint256().
   * This yields the value 115792089237316195423570985008687907853269984665640564.
   * Test maxNewFixed equals maxUint256()/fixed1()
   * Test divide(maxNewFixed,1) equals maxNewFixed*(fixed1)
   * Test divide(maxNewFixed+1,multiply(mulPrecision(),mulPrecision())) throws
   * Test divide(fixed1(),0) fails
   * Test divide(maxNewFixed,1) = maxNewFixed*(10^digits())
   * Test divide(maxNewFixed+1,1) throws
   */
  function divide(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) {
    require(y.value != 0, "can't divide by 0");
    uint256 X = x.value * FIXED1_UINT;
    require(X / FIXED1_UINT == x.value, "overflow at divide");
    return Fraction(X / y.value);
  }

  /**
   * @notice x > y
   */
  function gt(Fraction memory x, Fraction memory y) internal pure returns (bool) {
    return x.value > y.value;
  }

  /**
   * @notice x >= y
   */
  function gte(Fraction memory x, Fraction memory y) internal pure returns (bool) {
    return x.value >= y.value;
  }

  /**
   * @notice x < y
   */
  function lt(Fraction memory x, Fraction memory y) internal pure returns (bool) {
    return x.value < y.value;
  }

  /**
   * @notice x <= y
   */
  function lte(Fraction memory x, Fraction memory y) internal pure returns (bool) {
    return x.value <= y.value;
  }

  /**
   * @notice x == y
   */
  function equals(Fraction memory x, Fraction memory y) internal pure returns (bool) {
    return x.value == y.value;
  }

  /**
   * @notice x <= 1
   */
  function isProperFraction(Fraction memory x) internal pure returns (bool) {
    return lte(x, fixed1());
  }
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

contract Initializable {
  bool public initialized;

  constructor(bool testingDeployment) public {
    if (!testingDeployment) {
      initialized = true;
    }
  }

  modifier initializer() {
    require(!initialized, "contract already initialized");
    initialized = true;
    _;
  }
}
          

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/math/SafeMath.sol";
import "../common/interfaces/ICeloVersionedContract.sol";

contract UsingPrecompiles {
  using SafeMath for uint256;

  address constant TRANSFER = address(0xff - 2);
  address constant FRACTION_MUL = address(0xff - 3);
  address constant PROOF_OF_POSSESSION = address(0xff - 4);
  address constant GET_VALIDATOR = address(0xff - 5);
  address constant NUMBER_VALIDATORS = address(0xff - 6);
  address constant EPOCH_SIZE = address(0xff - 7);
  address constant BLOCK_NUMBER_FROM_HEADER = address(0xff - 8);
  address constant HASH_HEADER = address(0xff - 9);
  address constant GET_PARENT_SEAL_BITMAP = address(0xff - 10);
  address constant GET_VERIFIED_SEAL_BITMAP = address(0xff - 11);

  /**
   * @notice calculate a * b^x for fractions a, b to `decimals` precision
   * @param aNumerator Numerator of first fraction
   * @param aDenominator Denominator of first fraction
   * @param bNumerator Numerator of exponentiated fraction
   * @param bDenominator Denominator of exponentiated fraction
   * @param exponent exponent to raise b to
   * @param _decimals precision
   * @return Numerator of the computed quantity (not reduced).
   * @return Denominator of the computed quantity (not reduced).
   */
  function fractionMulExp(
    uint256 aNumerator,
    uint256 aDenominator,
    uint256 bNumerator,
    uint256 bDenominator,
    uint256 exponent,
    uint256 _decimals
  ) public view returns (uint256, uint256) {
    require(aDenominator != 0 && bDenominator != 0, "a denominator is zero");
    uint256 returnNumerator;
    uint256 returnDenominator;
    bool success;
    bytes memory out;
    (success, out) = FRACTION_MUL.staticcall(
      abi.encodePacked(aNumerator, aDenominator, bNumerator, bDenominator, exponent, _decimals)
    );
    require(success, "error calling fractionMulExp precompile");
    returnNumerator = getUint256FromBytes(out, 0);
    returnDenominator = getUint256FromBytes(out, 32);
    return (returnNumerator, returnDenominator);
  }

  /**
   * @notice Returns the current epoch size in blocks.
   * @return The current epoch size in blocks.
   */
  function getEpochSize() public view returns (uint256) {
    bytes memory out;
    bool success;
    (success, out) = EPOCH_SIZE.staticcall(abi.encodePacked());
    require(success, "error calling getEpochSize precompile");
    return getUint256FromBytes(out, 0);
  }

  /**
   * @notice Returns the epoch number at a block.
   * @param blockNumber Block number where epoch number is calculated.
   * @return Epoch number.
   */
  function getEpochNumberOfBlock(uint256 blockNumber) public view returns (uint256) {
    return epochNumberOfBlock(blockNumber, getEpochSize());
  }

  /**
   * @notice Returns the epoch number at a block.
   * @return Current epoch number.
   */
  function getEpochNumber() public view returns (uint256) {
    return getEpochNumberOfBlock(block.number);
  }

  /**
   * @notice Returns the epoch number at a block.
   * @param blockNumber Block number where epoch number is calculated.
   * @param epochSize The epoch size in blocks.
   * @return Epoch number.
   */
  function epochNumberOfBlock(uint256 blockNumber, uint256 epochSize)
    internal
    pure
    returns (uint256)
  {
    // Follows GetEpochNumber from celo-blockchain/blob/master/consensus/istanbul/utils.go
    uint256 epochNumber = blockNumber / epochSize;
    if (blockNumber % epochSize == 0) {
      return epochNumber;
    } else {
      return epochNumber.add(1);
    }
  }

  /**
   * @notice Gets a validator address from the current validator set.
   * @param index Index of requested validator in the validator set.
   * @return Address of validator at the requested index.
   */
  function validatorSignerAddressFromCurrentSet(uint256 index) public view returns (address) {
    bytes memory out;
    bool success;
    (success, out) = GET_VALIDATOR.staticcall(abi.encodePacked(index, uint256(block.number)));
    require(success, "error calling validatorSignerAddressFromCurrentSet precompile");
    return address(getUint256FromBytes(out, 0));
  }

  /**
   * @notice Gets a validator address from the validator set at the given block number.
   * @param index Index of requested validator in the validator set.
   * @param blockNumber Block number to retrieve the validator set from.
   * @return Address of validator at the requested index.
   */
  function validatorSignerAddressFromSet(uint256 index, uint256 blockNumber)
    public
    view
    returns (address)
  {
    bytes memory out;
    bool success;
    (success, out) = GET_VALIDATOR.staticcall(abi.encodePacked(index, blockNumber));
    require(success, "error calling validatorSignerAddressFromSet precompile");
    return address(getUint256FromBytes(out, 0));
  }

  /**
   * @notice Gets the size of the current elected validator set.
   * @return Size of the current elected validator set.
   */
  function numberValidatorsInCurrentSet() public view returns (uint256) {
    bytes memory out;
    bool success;
    (success, out) = NUMBER_VALIDATORS.staticcall(abi.encodePacked(uint256(block.number)));
    require(success, "error calling numberValidatorsInCurrentSet precompile");
    return getUint256FromBytes(out, 0);
  }

  /**
   * @notice Gets the size of the validator set that must sign the given block number.
   * @param blockNumber Block number to retrieve the validator set from.
   * @return Size of the validator set.
   */
  function numberValidatorsInSet(uint256 blockNumber) public view returns (uint256) {
    bytes memory out;
    bool success;
    (success, out) = NUMBER_VALIDATORS.staticcall(abi.encodePacked(blockNumber));
    require(success, "error calling numberValidatorsInSet precompile");
    return getUint256FromBytes(out, 0);
  }

  /**
   * @notice Checks a BLS proof of possession.
   * @param sender The address signed by the BLS key to generate the proof of possession.
   * @param blsKey The BLS public key that the validator is using for consensus, should pass proof
   *   of possession. 48 bytes.
   * @param blsPop The BLS public key proof-of-possession, which consists of a signature on the
   *   account address. 96 bytes.
   * @return True upon success.
   */
  function checkProofOfPossession(address sender, bytes memory blsKey, bytes memory blsPop)
    public
    view
    returns (bool)
  {
    bool success;
    (success, ) = PROOF_OF_POSSESSION.staticcall(abi.encodePacked(sender, blsKey, blsPop));
    return success;
  }

  /**
   * @notice Parses block number out of header.
   * @param header RLP encoded header
   * @return Block number.
   */
  function getBlockNumberFromHeader(bytes memory header) public view returns (uint256) {
    bytes memory out;
    bool success;
    (success, out) = BLOCK_NUMBER_FROM_HEADER.staticcall(abi.encodePacked(header));
    require(success, "error calling getBlockNumberFromHeader precompile");
    return getUint256FromBytes(out, 0);
  }

  /**
   * @notice Computes hash of header.
   * @param header RLP encoded header
   * @return Header hash.
   */
  function hashHeader(bytes memory header) public view returns (bytes32) {
    bytes memory out;
    bool success;
    (success, out) = HASH_HEADER.staticcall(abi.encodePacked(header));
    require(success, "error calling hashHeader precompile");
    return getBytes32FromBytes(out, 0);
  }

  /**
   * @notice Gets the parent seal bitmap from the header at the given block number.
   * @param blockNumber Block number to retrieve. Must be within 4 epochs of the current number.
   * @return Bitmap parent seal with set bits at indices corresponding to signing validators.
   */
  function getParentSealBitmap(uint256 blockNumber) public view returns (bytes32) {
    bytes memory out;
    bool success;
    (success, out) = GET_PARENT_SEAL_BITMAP.staticcall(abi.encodePacked(blockNumber));
    require(success, "error calling getParentSealBitmap precompile");
    return getBytes32FromBytes(out, 0);
  }

  /**
   * @notice Verifies the BLS signature on the header and returns the seal bitmap.
   * The validator set used for verification is retrieved based on the parent hash field of the
   * header.  If the parent hash is not in the blockchain, verification fails.
   * @param header RLP encoded header
   * @return Bitmap parent seal with set bits at indices correspoinding to signing validators.
   */
  function getVerifiedSealBitmapFromHeader(bytes memory header) public view returns (bytes32) {
    bytes memory out;
    bool success;
    (success, out) = GET_VERIFIED_SEAL_BITMAP.staticcall(abi.encodePacked(header));
    require(success, "error calling getVerifiedSealBitmapFromHeader precompile");
    return getBytes32FromBytes(out, 0);
  }

  /**
   * @notice Converts bytes to uint256.
   * @param bs byte[] data
   * @param start offset into byte data to convert
   * @return uint256 data
   */
  function getUint256FromBytes(bytes memory bs, uint256 start) internal pure returns (uint256) {
    return uint256(getBytes32FromBytes(bs, start));
  }

  /**
   * @notice Converts bytes to bytes32.
   * @param bs byte[] data
   * @param start offset into byte data to convert
   * @return bytes32 data
   */
  function getBytes32FromBytes(bytes memory bs, uint256 start) internal pure returns (bytes32) {
    require(bs.length >= start.add(32), "slicing out of range");
    bytes32 x;
    assembly {
      x := mload(add(bs, add(start, 32)))
    }
    return x;
  }

  /**
   * @notice Returns the minimum number of required signers for a given block number.
   * @dev Computed in celo-blockchain as int(math.Ceil(float64(2*valSet.Size()) / 3))
   */
  function minQuorumSize(uint256 blockNumber) public view returns (uint256) {
    return numberValidatorsInSet(blockNumber).mul(2).add(2).div(3);
  }

  /**
   * @notice Computes byzantine quorum from current validator set size
   * @return Byzantine quorum of validators.
   */
  function minQuorumSizeInCurrentSet() public view returns (uint256) {
    return minQuorumSize(block.number);
  }
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/ownership/Ownable.sol";
import "openzeppelin-solidity/contracts/token/ERC20/IERC20.sol";

import "./interfaces/IAccounts.sol";
import "./interfaces/IFeeCurrencyWhitelist.sol";
import "./interfaces/IFreezer.sol";
import "./interfaces/IRegistry.sol";

import "../governance/interfaces/IElection.sol";
import "../governance/interfaces/IGovernance.sol";
import "../governance/interfaces/ILockedGold.sol";
import "../governance/interfaces/IValidators.sol";

import "../identity/interfaces/IRandom.sol";
import "../identity/interfaces/IAttestations.sol";

import "../../lib/mento-core/contracts/interfaces/IExchange.sol";
import "../../lib/mento-core/contracts/interfaces/IReserve.sol";
import "../../lib/mento-core/contracts/interfaces/IStableToken.sol";
import "../stability/interfaces/ISortedOracles.sol";

contract UsingRegistry is Ownable {
  event RegistrySet(address indexed registryAddress);

  // solhint-disable state-visibility
  bytes32 constant ACCOUNTS_REGISTRY_ID = keccak256(abi.encodePacked("Accounts"));
  bytes32 constant ATTESTATIONS_REGISTRY_ID = keccak256(abi.encodePacked("Attestations"));
  bytes32 constant DOWNTIME_SLASHER_REGISTRY_ID = keccak256(abi.encodePacked("DowntimeSlasher"));
  bytes32 constant DOUBLE_SIGNING_SLASHER_REGISTRY_ID = keccak256(
    abi.encodePacked("DoubleSigningSlasher")
  );
  bytes32 constant ELECTION_REGISTRY_ID = keccak256(abi.encodePacked("Election"));
  bytes32 constant EXCHANGE_REGISTRY_ID = keccak256(abi.encodePacked("Exchange"));
  bytes32 constant FEE_CURRENCY_WHITELIST_REGISTRY_ID = keccak256(
    abi.encodePacked("FeeCurrencyWhitelist")
  );
  bytes32 constant FREEZER_REGISTRY_ID = keccak256(abi.encodePacked("Freezer"));
  bytes32 constant GOLD_TOKEN_REGISTRY_ID = keccak256(abi.encodePacked("GoldToken"));
  bytes32 constant GOVERNANCE_REGISTRY_ID = keccak256(abi.encodePacked("Governance"));
  bytes32 constant GOVERNANCE_SLASHER_REGISTRY_ID = keccak256(
    abi.encodePacked("GovernanceSlasher")
  );
  bytes32 constant LOCKED_GOLD_REGISTRY_ID = keccak256(abi.encodePacked("LockedGold"));
  bytes32 constant RESERVE_REGISTRY_ID = keccak256(abi.encodePacked("Reserve"));
  bytes32 constant RANDOM_REGISTRY_ID = keccak256(abi.encodePacked("Random"));
  bytes32 constant SORTED_ORACLES_REGISTRY_ID = keccak256(abi.encodePacked("SortedOracles"));
  bytes32 constant STABLE_TOKEN_REGISTRY_ID = keccak256(abi.encodePacked("StableToken"));
  bytes32 constant VALIDATORS_REGISTRY_ID = keccak256(abi.encodePacked("Validators"));
  // solhint-enable state-visibility

  IRegistry public registry;

  modifier onlyRegisteredContract(bytes32 identifierHash) {
    require(registry.getAddressForOrDie(identifierHash) == msg.sender, "only registered contract");
    _;
  }

  modifier onlyRegisteredContracts(bytes32[] memory identifierHashes) {
    require(registry.isOneOf(identifierHashes, msg.sender), "only registered contracts");
    _;
  }

  /**
   * @notice Updates the address pointing to a Registry contract.
   * @param registryAddress The address of a registry contract for routing to other contracts.
   */
  function setRegistry(address registryAddress) public onlyOwner {
    require(registryAddress != address(0), "Cannot register the null address");
    registry = IRegistry(registryAddress);
    emit RegistrySet(registryAddress);
  }

  function getAccounts() internal view returns (IAccounts) {
    return IAccounts(registry.getAddressForOrDie(ACCOUNTS_REGISTRY_ID));
  }

  function getAttestations() internal view returns (IAttestations) {
    return IAttestations(registry.getAddressForOrDie(ATTESTATIONS_REGISTRY_ID));
  }

  function getElection() internal view returns (IElection) {
    return IElection(registry.getAddressForOrDie(ELECTION_REGISTRY_ID));
  }

  function getExchange() internal view returns (IExchange) {
    return IExchange(registry.getAddressForOrDie(EXCHANGE_REGISTRY_ID));
  }

  function getFeeCurrencyWhitelistRegistry() internal view returns (IFeeCurrencyWhitelist) {
    return IFeeCurrencyWhitelist(registry.getAddressForOrDie(FEE_CURRENCY_WHITELIST_REGISTRY_ID));
  }

  function getFreezer() internal view returns (IFreezer) {
    return IFreezer(registry.getAddressForOrDie(FREEZER_REGISTRY_ID));
  }

  function getGoldToken() internal view returns (IERC20) {
    return IERC20(registry.getAddressForOrDie(GOLD_TOKEN_REGISTRY_ID));
  }

  function getGovernance() internal view returns (IGovernance) {
    return IGovernance(registry.getAddressForOrDie(GOVERNANCE_REGISTRY_ID));
  }

  function getLockedGold() internal view returns (ILockedGold) {
    return ILockedGold(registry.getAddressForOrDie(LOCKED_GOLD_REGISTRY_ID));
  }

  function getRandom() internal view returns (IRandom) {
    return IRandom(registry.getAddressForOrDie(RANDOM_REGISTRY_ID));
  }

  function getReserve() internal view returns (IReserve) {
    return IReserve(registry.getAddressForOrDie(RESERVE_REGISTRY_ID));
  }

  function getSortedOracles() internal view returns (ISortedOracles) {
    return ISortedOracles(registry.getAddressForOrDie(SORTED_ORACLES_REGISTRY_ID));
  }

  function getStableToken() internal view returns (IStableToken) {
    return IStableToken(registry.getAddressForOrDie(STABLE_TOKEN_REGISTRY_ID));
  }

  function getValidators() internal view returns (IValidators) {
    return IValidators(registry.getAddressForOrDie(VALIDATORS_REGISTRY_ID));
  }
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IAccounts {
  function isAccount(address) external view returns (bool);
  function voteSignerToAccount(address) external view returns (address);
  function validatorSignerToAccount(address) external view returns (address);
  function attestationSignerToAccount(address) external view returns (address);
  function signerToAccount(address) external view returns (address);
  function getAttestationSigner(address) external view returns (address);
  function getValidatorSigner(address) external view returns (address);
  function getVoteSigner(address) external view returns (address);
  function hasAuthorizedVoteSigner(address) external view returns (bool);
  function hasAuthorizedValidatorSigner(address) external view returns (bool);
  function hasAuthorizedAttestationSigner(address) external view returns (bool);

  function setAccountDataEncryptionKey(bytes calldata) external;
  function setMetadataURL(string calldata) external;
  function setName(string calldata) external;
  function setWalletAddress(address, uint8, bytes32, bytes32) external;
  function setAccount(string calldata, bytes calldata, address, uint8, bytes32, bytes32) external;

  function getDataEncryptionKey(address) external view returns (bytes memory);
  function getWalletAddress(address) external view returns (address);
  function getMetadataURL(address) external view returns (string memory);
  function batchGetMetadataURL(address[] calldata)
    external
    view
    returns (uint256[] memory, bytes memory);
  function getName(address) external view returns (string memory);

  function authorizeVoteSigner(address, uint8, bytes32, bytes32) external;
  function authorizeValidatorSigner(address, uint8, bytes32, bytes32) external;
  function authorizeValidatorSignerWithPublicKey(address, uint8, bytes32, bytes32, bytes calldata)
    external;
  function authorizeValidatorSignerWithKeys(
    address,
    uint8,
    bytes32,
    bytes32,
    bytes calldata,
    bytes calldata,
    bytes calldata
  ) external;
  function authorizeAttestationSigner(address, uint8, bytes32, bytes32) external;
  function createAccount() external returns (bool);

  function setPaymentDelegation(address, uint256) external;
  function getPaymentDelegation(address) external view returns (address, uint256);
  function isSigner(address, address, bytes32) external view returns (bool);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface ICeloVersionedContract {
  /**
   * @notice Returns the storage, major, minor, and patch version of the contract.
    * @return Storage version of the contract.
    * @return Major version of the contract.
    * @return Minor version of the contract.
    * @return Patch version of the contract.
   */
  function getVersionNumber() external pure returns (uint256, uint256, uint256, uint256);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IFeeCurrencyWhitelist {
  function addToken(address) external;
  function getWhitelist() external view returns (address[] memory);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IFreezer {
  function isFrozen(address) external view returns (bool);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IRegistry {
  function setAddressFor(string calldata, address) external;
  function getAddressForOrDie(bytes32) external view returns (address);
  function getAddressFor(bytes32) external view returns (address);
  function getAddressForStringOrDie(string calldata identifier) external view returns (address);
  function getAddressForString(string calldata identifier) external view returns (address);
  function isOneOf(bytes32[] calldata, address) external view returns (bool);
}
          

pragma solidity ^0.5.13;

/**
 * @title Helps contracts guard against reentrancy attacks.
 * @author Remco Bloemen <remco@2π.com>, Eenae <[email protected]>
 * @dev If you mark a function `nonReentrant`, you should also
 * mark it `external`.
 */
contract ReentrancyGuard {
  /// @dev counter to allow mutex lock with only one SSTORE operation
  uint256 private _guardCounter;

  constructor() internal {
    // The counter starts at one to prevent changing it from zero to a non-zero
    // value, which is a more expensive operation.
    _guardCounter = 1;
  }

  /**
   * @dev Prevents a contract from calling itself, directly or indirectly.
   * Calling a `nonReentrant` function from another `nonReentrant`
   * function is not supported. It is possible to prevent this from happening
   * by making the `nonReentrant` function external, and make it call a
   * `private` function that does the actual work.
   */
  modifier nonReentrant() {
    _guardCounter += 1;
    uint256 localCounter = _guardCounter;
    _;
    require(localCounter == _guardCounter, "reentrant call");
  }
}
          

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/math/SafeMath.sol";

import "./SortedLinkedList.sol";

/**
 * @title Maintains a sorted list of unsigned ints keyed by uint256.
 */
library IntegerSortedLinkedList {
  using SafeMath for uint256;
  using SortedLinkedList for SortedLinkedList.List;

  /**
   * @notice Inserts an element into a doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   * @param value The element value.
   * @param lesserKey The key of the element less than the element to insert.
   * @param greaterKey The key of the element greater than the element to insert.
   */
  function insert(
    SortedLinkedList.List storage list,
    uint256 key,
    uint256 value,
    uint256 lesserKey,
    uint256 greaterKey
  ) public {
    list.insert(bytes32(key), value, bytes32(lesserKey), bytes32(greaterKey));
  }

  /**
   * @notice Removes an element from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to remove.
   */
  function remove(SortedLinkedList.List storage list, uint256 key) public {
    list.remove(bytes32(key));
  }

  /**
   * @notice Updates an element in the list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @param value The element value.
   * @param lesserKey The key of the element will be just left of `key` after the update.
   * @param greaterKey The key of the element will be just right of `key` after the update.
   * @dev Note that only one of "lesserKey" or "greaterKey" needs to be correct to reduce friction.
   */
  function update(
    SortedLinkedList.List storage list,
    uint256 key,
    uint256 value,
    uint256 lesserKey,
    uint256 greaterKey
  ) public {
    list.update(bytes32(key), value, bytes32(lesserKey), bytes32(greaterKey));
  }

  /**
   * @notice Inserts an element at the end of the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   */
  function push(SortedLinkedList.List storage list, uint256 key) public {
    list.push(bytes32(key));
  }

  /**
   * @notice Removes N elements from the head of the list and returns their keys.
   * @param list A storage pointer to the underlying list.
   * @param n The number of elements to pop.
   * @return The keys of the popped elements.
   */
  function popN(SortedLinkedList.List storage list, uint256 n) public returns (uint256[] memory) {
    bytes32[] memory byteKeys = list.popN(n);
    uint256[] memory keys = new uint256[](byteKeys.length);
    for (uint256 i = 0; i < byteKeys.length; i = i.add(1)) {
      keys[i] = uint256(byteKeys[i]);
    }
    return keys;
  }

  /**
   * @notice Returns whether or not a particular key is present in the sorted list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @return Whether or not the key is in the sorted list.
   */
  function contains(SortedLinkedList.List storage list, uint256 key) public view returns (bool) {
    return list.contains(bytes32(key));
  }

  /**
   * @notice Returns the value for a particular key in the sorted list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @return The element value.
   */
  function getValue(SortedLinkedList.List storage list, uint256 key) public view returns (uint256) {
    return list.getValue(bytes32(key));
  }

  /**
   * @notice Gets all elements from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @return Array of all keys in the list.
   * @return Values corresponding to keys, which will be ordered largest to smallest.
   */
  function getElements(SortedLinkedList.List storage list)
    public
    view
    returns (uint256[] memory, uint256[] memory)
  {
    bytes32[] memory byteKeys = list.getKeys();
    uint256[] memory keys = new uint256[](byteKeys.length);
    uint256[] memory values = new uint256[](byteKeys.length);
    for (uint256 i = 0; i < byteKeys.length; i = i.add(1)) {
      keys[i] = uint256(byteKeys[i]);
      values[i] = list.values[byteKeys[i]];
    }
    return (keys, values);
  }
}
          

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/math/SafeMath.sol";

/**
 * @title Maintains a doubly linked list keyed by bytes32.
 * @dev Following the `next` pointers will lead you to the head, rather than the tail.
 */
library LinkedList {
  using SafeMath for uint256;

  struct Element {
    bytes32 previousKey;
    bytes32 nextKey;
    bool exists;
  }

  struct List {
    bytes32 head;
    bytes32 tail;
    uint256 numElements;
    mapping(bytes32 => Element) elements;
  }

  /**
   * @notice Inserts an element into a doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   * @param previousKey The key of the element that comes before the element to insert.
   * @param nextKey The key of the element that comes after the element to insert.
   */
  function insert(List storage list, bytes32 key, bytes32 previousKey, bytes32 nextKey) internal {
    require(key != bytes32(0), "Key must be defined");
    require(!contains(list, key), "Can't insert an existing element");
    require(
      previousKey != key && nextKey != key,
      "Key cannot be the same as previousKey or nextKey"
    );

    Element storage element = list.elements[key];
    element.exists = true;

    if (list.numElements == 0) {
      list.tail = key;
      list.head = key;
    } else {
      require(
        previousKey != bytes32(0) || nextKey != bytes32(0),
        "Either previousKey or nextKey must be defined"
      );

      element.previousKey = previousKey;
      element.nextKey = nextKey;

      if (previousKey != bytes32(0)) {
        require(
          contains(list, previousKey),
          "If previousKey is defined, it must exist in the list"
        );
        Element storage previousElement = list.elements[previousKey];
        require(previousElement.nextKey == nextKey, "previousKey must be adjacent to nextKey");
        previousElement.nextKey = key;
      } else {
        list.tail = key;
      }

      if (nextKey != bytes32(0)) {
        require(contains(list, nextKey), "If nextKey is defined, it must exist in the list");
        Element storage nextElement = list.elements[nextKey];
        require(nextElement.previousKey == previousKey, "previousKey must be adjacent to nextKey");
        nextElement.previousKey = key;
      } else {
        list.head = key;
      }
    }

    list.numElements = list.numElements.add(1);
  }

  /**
   * @notice Inserts an element at the tail of the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   */
  function push(List storage list, bytes32 key) internal {
    insert(list, key, bytes32(0), list.tail);
  }

  /**
   * @notice Removes an element from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to remove.
   */
  function remove(List storage list, bytes32 key) internal {
    Element storage element = list.elements[key];
    require(key != bytes32(0) && contains(list, key), "key not in list");
    if (element.previousKey != bytes32(0)) {
      Element storage previousElement = list.elements[element.previousKey];
      previousElement.nextKey = element.nextKey;
    } else {
      list.tail = element.nextKey;
    }

    if (element.nextKey != bytes32(0)) {
      Element storage nextElement = list.elements[element.nextKey];
      nextElement.previousKey = element.previousKey;
    } else {
      list.head = element.previousKey;
    }

    delete list.elements[key];
    list.numElements = list.numElements.sub(1);
  }

  /**
   * @notice Updates an element in the list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @param previousKey The key of the element that comes before the updated element.
   * @param nextKey The key of the element that comes after the updated element.
   */
  function update(List storage list, bytes32 key, bytes32 previousKey, bytes32 nextKey) internal {
    require(
      key != bytes32(0) && key != previousKey && key != nextKey && contains(list, key),
      "key on in list"
    );
    remove(list, key);
    insert(list, key, previousKey, nextKey);
  }

  /**
   * @notice Returns whether or not a particular key is present in the sorted list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @return Whether or not the key is in the sorted list.
   */
  function contains(List storage list, bytes32 key) internal view returns (bool) {
    return list.elements[key].exists;
  }

  /**
   * @notice Returns the keys of the N elements at the head of the list.
   * @param list A storage pointer to the underlying list.
   * @param n The number of elements to return.
   * @return The keys of the N elements at the head of the list.
   * @dev Reverts if n is greater than the number of elements in the list.
   */
  function headN(List storage list, uint256 n) internal view returns (bytes32[] memory) {
    require(n <= list.numElements, "not enough elements");
    bytes32[] memory keys = new bytes32[](n);
    bytes32 key = list.head;
    for (uint256 i = 0; i < n; i = i.add(1)) {
      keys[i] = key;
      key = list.elements[key].previousKey;
    }
    return keys;
  }

  /**
   * @notice Gets all element keys from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @return All element keys from head to tail.
   */
  function getKeys(List storage list) internal view returns (bytes32[] memory) {
    return headN(list, list.numElements);
  }
}
          

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/math/SafeMath.sol";
import "./LinkedList.sol";

/**
 * @title Maintains a sorted list of unsigned ints keyed by bytes32.
 */
library SortedLinkedList {
  using SafeMath for uint256;
  using LinkedList for LinkedList.List;

  struct List {
    LinkedList.List list;
    mapping(bytes32 => uint256) values;
  }

  /**
   * @notice Inserts an element into a doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   * @param value The element value.
   * @param lesserKey The key of the element less than the element to insert.
   * @param greaterKey The key of the element greater than the element to insert.
   */
  function insert(
    List storage list,
    bytes32 key,
    uint256 value,
    bytes32 lesserKey,
    bytes32 greaterKey
  ) internal {
    require(
      key != bytes32(0) && key != lesserKey && key != greaterKey && !contains(list, key),
      "invalid key"
    );
    require(
      (lesserKey != bytes32(0) || greaterKey != bytes32(0)) || list.list.numElements == 0,
      "greater and lesser key zero"
    );
    require(contains(list, lesserKey) || lesserKey == bytes32(0), "invalid lesser key");
    require(contains(list, greaterKey) || greaterKey == bytes32(0), "invalid greater key");
    (lesserKey, greaterKey) = getLesserAndGreater(list, value, lesserKey, greaterKey);
    list.list.insert(key, lesserKey, greaterKey);
    list.values[key] = value;
  }

  /**
   * @notice Removes an element from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to remove.
   */
  function remove(List storage list, bytes32 key) internal {
    list.list.remove(key);
    list.values[key] = 0;
  }

  /**
   * @notice Updates an element in the list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @param value The element value.
   * @param lesserKey The key of the element will be just left of `key` after the update.
   * @param greaterKey The key of the element will be just right of `key` after the update.
   * @dev Note that only one of "lesserKey" or "greaterKey" needs to be correct to reduce friction.
   */
  function update(
    List storage list,
    bytes32 key,
    uint256 value,
    bytes32 lesserKey,
    bytes32 greaterKey
  ) internal {
    remove(list, key);
    insert(list, key, value, lesserKey, greaterKey);
  }

  /**
   * @notice Inserts an element at the tail of the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @param key The key of the element to insert.
   */
  function push(List storage list, bytes32 key) internal {
    insert(list, key, 0, bytes32(0), list.list.tail);
  }

  /**
   * @notice Removes N elements from the head of the list and returns their keys.
   * @param list A storage pointer to the underlying list.
   * @param n The number of elements to pop.
   * @return The keys of the popped elements.
   */
  function popN(List storage list, uint256 n) internal returns (bytes32[] memory) {
    require(n <= list.list.numElements, "not enough elements");
    bytes32[] memory keys = new bytes32[](n);
    for (uint256 i = 0; i < n; i = i.add(1)) {
      bytes32 key = list.list.head;
      keys[i] = key;
      remove(list, key);
    }
    return keys;
  }

  /**
   * @notice Returns whether or not a particular key is present in the sorted list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @return Whether or not the key is in the sorted list.
   */
  function contains(List storage list, bytes32 key) internal view returns (bool) {
    return list.list.contains(key);
  }

  /**
   * @notice Returns the value for a particular key in the sorted list.
   * @param list A storage pointer to the underlying list.
   * @param key The element key.
   * @return The element value.
   */
  function getValue(List storage list, bytes32 key) internal view returns (uint256) {
    return list.values[key];
  }

  /**
   * @notice Gets all elements from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @return Array of all keys in the list.
   * @return Values corresponding to keys, which will be ordered largest to smallest.
   */
  function getElements(List storage list)
    internal
    view
    returns (bytes32[] memory, uint256[] memory)
  {
    bytes32[] memory keys = getKeys(list);
    uint256[] memory values = new uint256[](keys.length);
    for (uint256 i = 0; i < keys.length; i = i.add(1)) {
      values[i] = list.values[keys[i]];
    }
    return (keys, values);
  }

  /**
   * @notice Gets all element keys from the doubly linked list.
   * @param list A storage pointer to the underlying list.
   * @return All element keys from head to tail.
   */
  function getKeys(List storage list) internal view returns (bytes32[] memory) {
    return list.list.getKeys();
  }

  /**
   * @notice Returns first N greatest elements of the list.
   * @param list A storage pointer to the underlying list.
   * @param n The number of elements to return.
   * @return The keys of the first n elements.
   * @dev Reverts if n is greater than the number of elements in the list.
   */
  function headN(List storage list, uint256 n) internal view returns (bytes32[] memory) {
    return list.list.headN(n);
  }

  /**
   * @notice Returns the keys of the elements greaterKey than and less than the provided value.
   * @param list A storage pointer to the underlying list.
   * @param value The element value.
   * @param lesserKey The key of the element which could be just left of the new value.
   * @param greaterKey The key of the element which could be just right of the new value.
   * @return The correct lesserKey keys.
   * @return The correct greaterKey keys.
   */
  function getLesserAndGreater(
    List storage list,
    uint256 value,
    bytes32 lesserKey,
    bytes32 greaterKey
  ) private view returns (bytes32, bytes32) {
    // Check for one of the following conditions and fail if none are met:
    //   1. The value is less than the current lowest value
    //   2. The value is greater than the current greatest value
    //   3. The value is just greater than the value for `lesserKey`
    //   4. The value is just less than the value for `greaterKey`
    if (lesserKey == bytes32(0) && isValueBetween(list, value, lesserKey, list.list.tail)) {
      return (lesserKey, list.list.tail);
    } else if (
      greaterKey == bytes32(0) && isValueBetween(list, value, list.list.head, greaterKey)
    ) {
      return (list.list.head, greaterKey);
    } else if (
      lesserKey != bytes32(0) &&
      isValueBetween(list, value, lesserKey, list.list.elements[lesserKey].nextKey)
    ) {
      return (lesserKey, list.list.elements[lesserKey].nextKey);
    } else if (
      greaterKey != bytes32(0) &&
      isValueBetween(list, value, list.list.elements[greaterKey].previousKey, greaterKey)
    ) {
      return (list.list.elements[greaterKey].previousKey, greaterKey);
    } else {
      require(false, "get lesser and greater failure");
    }
  }

  /**
   * @notice Returns whether or not a given element is between two other elements.
   * @param list A storage pointer to the underlying list.
   * @param value The element value.
   * @param lesserKey The key of the element whose value should be lesserKey.
   * @param greaterKey The key of the element whose value should be greaterKey.
   * @return True if the given element is between the two other elements.
   */
  function isValueBetween(List storage list, uint256 value, bytes32 lesserKey, bytes32 greaterKey)
    private
    view
    returns (bool)
  {
    bool isLesser = lesserKey == bytes32(0) || list.values[lesserKey] <= value;
    bool isGreater = greaterKey == bytes32(0) || list.values[greaterKey] >= value;
    return isLesser && isGreater;
  }
}
          

pragma solidity ^0.5.13;

import "openzeppelin-solidity/contracts/math/SafeMath.sol";
import "openzeppelin-solidity/contracts/utils/Address.sol";
import "solidity-bytes-utils/contracts/BytesLib.sol";

import "../common/FixidityLib.sol";

/**
 * @title A library operating on Celo Governance proposals.
 */
library Proposals {
  using FixidityLib for FixidityLib.Fraction;
  using SafeMath for uint256;
  using BytesLib for bytes;

  enum Stage { None, Queued, Approval, Referendum, Execution, Expiration }

  enum VoteValue { None, Abstain, No, Yes }

  struct StageDurations {
    uint256 approval;
    uint256 referendum;
    uint256 execution;
  }

  struct VoteTotals {
    uint256 yes;
    uint256 no;
    uint256 abstain;
  }

  struct Transaction {
    uint256 value;
    address destination;
    bytes data;
  }

  struct Proposal {
    address proposer;
    uint256 deposit;
    uint256 timestamp;
    VoteTotals votes;
    Transaction[] transactions;
    bool approved;
    uint256 networkWeight;
    string descriptionUrl;
  }

  /**
   * @notice Constructs a proposal.
   * @param proposal The proposal struct to be constructed.
   * @param values The values of CELO to be sent in the proposed transactions.
   * @param destinations The destination addresses of the proposed transactions.
   * @param data The concatenated data to be included in the proposed transactions.
   * @param dataLengths The lengths of each transaction's data.
   * @param proposer The proposer.
   * @param deposit The proposal deposit.
   */
  function make(
    Proposal storage proposal,
    uint256[] memory values,
    address[] memory destinations,
    bytes memory data,
    uint256[] memory dataLengths,
    address proposer,
    uint256 deposit
  ) public {
    require(
      values.length == destinations.length && destinations.length == dataLengths.length,
      "Array length mismatch"
    );
    uint256 transactionCount = values.length;

    proposal.proposer = proposer;
    proposal.deposit = deposit;
    // solhint-disable-next-line not-rely-on-time
    proposal.timestamp = now;

    uint256 dataPosition = 0;
    delete proposal.transactions;
    for (uint256 i = 0; i < transactionCount; i = i.add(1)) {
      proposal.transactions.push(
        Transaction(values[i], destinations[i], data.slice(dataPosition, dataLengths[i]))
      );
      dataPosition = dataPosition.add(dataLengths[i]);
    }
  }

  function setDescriptionUrl(Proposal storage proposal, string memory descriptionUrl) internal {
    require(bytes(descriptionUrl).length != 0, "Description url must have non-zero length");
    proposal.descriptionUrl = descriptionUrl;
  }

  /**
   * @notice Constructs a proposal for use in memory.
   * @param values The values of CELO to be sent in the proposed transactions.
   * @param destinations The destination addresses of the proposed transactions.
   * @param data The concatenated data to be included in the proposed transactions.
   * @param dataLengths The lengths of each transaction's data.
   * @param proposer The proposer.
   * @param deposit The proposal deposit.
   */
  function makeMem(
    uint256[] memory values,
    address[] memory destinations,
    bytes memory data,
    uint256[] memory dataLengths,
    address proposer,
    uint256 deposit
  ) internal view returns (Proposal memory) {
    require(
      values.length == destinations.length && destinations.length == dataLengths.length,
      "Array length mismatch"
    );
    uint256 transactionCount = values.length;

    Proposal memory proposal;
    proposal.proposer = proposer;
    proposal.deposit = deposit;
    // solhint-disable-next-line not-rely-on-time
    proposal.timestamp = now;

    uint256 dataPosition = 0;
    proposal.transactions = new Transaction[](transactionCount);
    for (uint256 i = 0; i < transactionCount; i = i.add(1)) {
      proposal.transactions[i] = Transaction(
        values[i],
        destinations[i],
        data.slice(dataPosition, dataLengths[i])
      );
      dataPosition = dataPosition.add(dataLengths[i]);
    }
    return proposal;
  }

  /**
   * @notice Adds or changes a vote on a proposal.
   * @param proposal The proposal struct.
   * @param previousYesVotes The previous yes votes weight.
   * @param previousNoVotes The previous no votes weight.
   * @param previousAbstainVotes The previous abstain votes weight.
   * @param yesVotes The current yes votes weight.
   * @param noVotes The current no votes weight.
   * @param abstainVotes The current abstain votes weight.
   */
  function updateVote(
    Proposal storage proposal,
    uint256 previousYesVotes,
    uint256 previousNoVotes,
    uint256 previousAbstainVotes,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  ) public {
    // Subtract previous vote.
    proposal.votes.yes = proposal.votes.yes.sub(previousYesVotes);
    proposal.votes.no = proposal.votes.no.sub(previousNoVotes);
    proposal.votes.abstain = proposal.votes.abstain.sub(previousAbstainVotes);

    // Add new vote.
    proposal.votes.yes = proposal.votes.yes.add(yesVotes);
    proposal.votes.no = proposal.votes.no.add(noVotes);
    proposal.votes.abstain = proposal.votes.abstain.add(abstainVotes);
  }

  /**
   * @notice Executes the proposal.
   * @param proposal The proposal struct.
   * @dev Reverts if any transaction fails.
   */
  function execute(Proposal storage proposal) public {
    executeTransactions(proposal.transactions);
  }

  /**
   * @notice Executes the proposal.
   * @param proposal The proposal struct.
   * @dev Reverts if any transaction fails.
   */
  function executeMem(Proposal memory proposal) internal {
    executeTransactions(proposal.transactions);
  }

  function executeTransactions(Transaction[] memory transactions) internal {
    for (uint256 i = 0; i < transactions.length; i = i.add(1)) {
      require(
        externalCall(
          transactions[i].destination,
          transactions[i].value,
          transactions[i].data.length,
          transactions[i].data
        ),
        "Proposal execution failed"
      );
    }
  }

  /**
   * @notice Computes the support ratio for a proposal with the quorum condition:
   *   If the total number of votes (yes + no + abstain) is less than the required number of votes,
   *   "no" votes are added to increase particiption to this level. The ratio of yes / (yes + no)
   *   votes is returned.
   * @param proposal The proposal struct.
   * @param quorum The minimum participation at which "no" votes are not added.
   * @return The support ratio with the quorum condition.
   */
  function getSupportWithQuorumPadding(
    Proposal storage proposal,
    FixidityLib.Fraction memory quorum
  ) internal view returns (FixidityLib.Fraction memory) {
    uint256 yesVotes = proposal.votes.yes;
    if (yesVotes == 0) {
      return FixidityLib.newFixed(0);
    }
    uint256 noVotes = proposal.votes.no;
    uint256 totalVotes = yesVotes.add(noVotes).add(proposal.votes.abstain);
    uint256 requiredVotes = quorum
      .multiply(FixidityLib.newFixed(proposal.networkWeight))
      .fromFixed();
    if (requiredVotes > totalVotes) {
      noVotes = noVotes.add(requiredVotes.sub(totalVotes));
    }
    return FixidityLib.newFixedFraction(yesVotes, yesVotes.add(noVotes));
  }

  /**
   * @notice Returns the number of votes cast on the proposal over the total number
   *   of votes in the network as a fraction.
   * @param proposal The proposal struct.
   * @return The participation of the proposal.
   */
  function getParticipation(Proposal storage proposal)
    internal
    view
    returns (FixidityLib.Fraction memory)
  {
    uint256 totalVotes = proposal.votes.yes.add(proposal.votes.no).add(proposal.votes.abstain);
    return FixidityLib.newFixedFraction(totalVotes, proposal.networkWeight);
  }

  /**
   * @notice Returns a specified transaction in a proposal.
   * @param proposal The proposal struct.
   * @param index The index of the specified transaction in the proposal's transaction list.
   * @return Transaction value.
   * @return Transaction destination.
   * @return Transaction data.
   */
  function getTransaction(Proposal storage proposal, uint256 index)
    public
    view
    returns (uint256, address, bytes memory)
  {
    require(index < proposal.transactions.length, "getTransaction: bad index");
    Transaction storage transaction = proposal.transactions[index];
    return (transaction.value, transaction.destination, transaction.data);
  }

  /**
   * @notice Returns an unpacked proposal struct with its transaction count.
   * @param proposal The proposal struct.
   * @return proposer
   * @return deposit
   * @return timestamp
   * @return transaction Transaction count.
   * @return description Description url.
   * @return networkWeight Network weight.
   */
  function unpack(Proposal storage proposal)
    internal
    view
    returns (address, uint256, uint256, uint256, string storage, uint256, bool)
  {
    return (
      proposal.proposer,
      proposal.deposit,
      proposal.timestamp,
      proposal.transactions.length,
      proposal.descriptionUrl,
      proposal.networkWeight,
      proposal.approved
    );
  }

  /**
   * @notice Returns the referendum vote totals for a proposal.
   * @param proposal The proposal struct.
   * @return The yes vote totals.
   * @return The no vote totals.
   * @return The abstain vote totals.
   */
  function getVoteTotals(Proposal storage proposal)
    internal
    view
    returns (uint256, uint256, uint256)
  {
    return (proposal.votes.yes, proposal.votes.no, proposal.votes.abstain);
  }

  /**
   * @notice Returns whether or not a proposal has been approved.
   * @param proposal The proposal struct.
   * @return Whether or not the proposal has been approved.
   */
  function isApproved(Proposal storage proposal) internal view returns (bool) {
    return proposal.approved;
  }

  /**
   * @notice Returns whether or not a proposal exists.
   * @param proposal The proposal struct.
   * @return Whether or not the proposal exists.
   */
  function exists(Proposal storage proposal) internal view returns (bool) {
    return proposal.timestamp > 0;
  }

  // call has been separated into its own function in order to take advantage
  // of the Solidity's code generator to produce a loop that copies tx.data into memory.
  /**
   * @notice Executes a function call.
   * @param value The value of CELO to be sent with the function call.
   * @param destination The destination address of the function call.
   * @param dataLength The length of the data to be included in the function call.
   * @param data The data to be included in the function call.
   */
  function externalCall(address destination, uint256 value, uint256 dataLength, bytes memory data)
    private
    returns (bool)
  {
    bool result;

    if (dataLength > 0) require(Address.isContract(destination), "Invalid contract address");

    /* solhint-disable no-inline-assembly */
    assembly {
      /* solhint-disable max-line-length */
      let x := mload(0x40) // "Allocate" memory for output (0x40 is where "free memory" pointer is stored by convention)
      let d := add(data, 32) // First 32 bytes are the padded length of data, so exclude that
      result := call(
        sub(gas, 34710), // 34710 is the value that solidity is currently emitting
        // It includes callGas (700) + callVeryLow (3, to pay for SUB) + callValueTransferGas (9000) +
        // callNewAccountGas (25000, in case the destination address does not exist and needs creating)
        destination,
        value,
        d,
        dataLength, // Size of the input (in bytes) - this is what fixes the padding problem
        x,
        0 // Output is ignored, therefore the output size is zero
      )
      /* solhint-enable max-line-length */
    }
    /* solhint-enable no-inline-assembly */
    return result;
  }
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IElection {
  function electValidatorSigners() external view returns (address[] memory);
  function electNValidatorSigners(uint256, uint256) external view returns (address[] memory);
  function vote(address, uint256, address, address) external returns (bool);
  function activate(address) external returns (bool);
  function revokeActive(address, uint256, address, address, uint256) external returns (bool);
  function revokeAllActive(address, address, address, uint256) external returns (bool);
  function revokePending(address, uint256, address, address, uint256) external returns (bool);
  function markGroupIneligible(address) external;
  function markGroupEligible(address, address, address) external;
  function allowedToVoteOverMaxNumberOfGroups(address) external returns (bool);
  function forceDecrementVotes(
    address,
    uint256,
    address[] calldata,
    address[] calldata,
    uint256[] calldata
  ) external returns (uint256);
  function setAllowedToVoteOverMaxNumberOfGroups(bool flag) external;

  // view functions
  function getElectableValidators() external view returns (uint256, uint256);
  function getElectabilityThreshold() external view returns (uint256);
  function getNumVotesReceivable(address) external view returns (uint256);
  function getTotalVotes() external view returns (uint256);
  function getActiveVotes() external view returns (uint256);
  function getTotalVotesByAccount(address) external view returns (uint256);
  function getPendingVotesForGroupByAccount(address, address) external view returns (uint256);
  function getActiveVotesForGroupByAccount(address, address) external view returns (uint256);
  function getTotalVotesForGroupByAccount(address, address) external view returns (uint256);
  function getActiveVoteUnitsForGroupByAccount(address, address) external view returns (uint256);
  function getTotalVotesForGroup(address) external view returns (uint256);
  function getActiveVotesForGroup(address) external view returns (uint256);
  function getPendingVotesForGroup(address) external view returns (uint256);
  function getGroupEligibility(address) external view returns (bool);
  function getGroupEpochRewards(address, uint256, uint256[] calldata)
    external
    view
    returns (uint256);
  function getGroupsVotedForByAccount(address) external view returns (address[] memory);
  function getEligibleValidatorGroups() external view returns (address[] memory);
  function getTotalVotesForEligibleValidatorGroups()
    external
    view
    returns (address[] memory, uint256[] memory);
  function getCurrentValidatorSigners() external view returns (address[] memory);
  function canReceiveVotes(address, uint256) external view returns (bool);
  function hasActivatablePendingVotes(address, address) external view returns (bool);
  function validatorSignerAddressFromCurrentSet(uint256 index) external view returns (address);
  function numberValidatorsInCurrentSet() external view returns (uint256);

  // only owner
  function setElectableValidators(uint256, uint256) external returns (bool);
  function setMaxNumGroupsVotedFor(uint256) external returns (bool);
  function setElectabilityThreshold(uint256) external returns (bool);

  // only VM
  function distributeEpochRewards(address, uint256, address, address) external;
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IGovernance {
  function removeVotesWhenRevokingDelegatedVotes(address account, uint256 maxAmountAllowed)
    external;
  function votePartially(
    uint256 proposalId,
    uint256 index,
    uint256 yesVotes,
    uint256 noVotes,
    uint256 abstainVotes
  ) external returns (bool);

  function isVoting(address) external view returns (bool);
  function getAmountOfGoldUsedForVoting(address account) external view returns (uint256);

  function getProposal(uint256 proposalId)
    external
    view
    returns (address, uint256, uint256, uint256, string memory, uint256, bool);

  function getReferendumStageDuration() external view returns (uint256);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface ILockedGold {
  function lock() external payable;
  function incrementNonvotingAccountBalance(address, uint256) external;
  function decrementNonvotingAccountBalance(address, uint256) external;
  function getAccountTotalLockedGold(address) external view returns (uint256);
  function getTotalLockedGold() external view returns (uint256);
  function getPendingWithdrawals(address)
    external
    view
    returns (uint256[] memory, uint256[] memory);
  function getPendingWithdrawal(address account, uint256 index)
    external
    view
    returns (uint256, uint256);
  function getTotalPendingWithdrawals(address) external view returns (uint256);
  function unlock(uint256) external;
  function relock(uint256, uint256) external;
  function withdraw(uint256) external;
  function slash(
    address account,
    uint256 penalty,
    address reporter,
    uint256 reward,
    address[] calldata lessers,
    address[] calldata greaters,
    uint256[] calldata indices
  ) external;
  function isSlasher(address) external view returns (bool);

  function getAccountTotalDelegatedFraction(address account) external view returns (uint256);

  function getAccountTotalGovernanceVotingPower(address account) external view returns (uint256);
  function unlockingPeriod() external view returns (uint256);
  function getAccountNonvotingLockedGold(address account) external view returns (uint256);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IValidators {
  function registerValidator(bytes calldata, bytes calldata, bytes calldata)
    external
    returns (bool);
  function deregisterValidator(uint256) external returns (bool);
  function affiliate(address) external returns (bool);
  function deaffiliate() external returns (bool);
  function updateBlsPublicKey(bytes calldata, bytes calldata) external returns (bool);
  function registerValidatorGroup(uint256) external returns (bool);
  function deregisterValidatorGroup(uint256) external returns (bool);
  function addMember(address) external returns (bool);
  function addFirstMember(address, address, address) external returns (bool);
  function removeMember(address) external returns (bool);
  function reorderMember(address, address, address) external returns (bool);
  function updateCommission() external;
  function setNextCommissionUpdate(uint256) external;
  function resetSlashingMultiplier() external;

  // only owner
  function setCommissionUpdateDelay(uint256) external;
  function setMaxGroupSize(uint256) external returns (bool);
  function setMembershipHistoryLength(uint256) external returns (bool);
  function setValidatorScoreParameters(uint256, uint256) external returns (bool);
  function setGroupLockedGoldRequirements(uint256, uint256) external returns (bool);
  function setValidatorLockedGoldRequirements(uint256, uint256) external returns (bool);
  function setSlashingMultiplierResetPeriod(uint256) external;

  // view functions
  function getMaxGroupSize() external view returns (uint256);
  function getCommissionUpdateDelay() external view returns (uint256);
  function getValidatorScoreParameters() external view returns (uint256, uint256);
  function getMembershipHistory(address)
    external
    view
    returns (uint256[] memory, address[] memory, uint256, uint256);
  function calculateEpochScore(uint256) external view returns (uint256);
  function calculateGroupEpochScore(uint256[] calldata) external view returns (uint256);
  function getAccountLockedGoldRequirement(address) external view returns (uint256);
  function meetsAccountLockedGoldRequirements(address) external view returns (bool);
  function getValidatorBlsPublicKeyFromSigner(address) external view returns (bytes memory);
  function getValidator(address account)
    external
    view
    returns (bytes memory, bytes memory, address, uint256, address);
  function getValidatorGroup(address)
    external
    view
    returns (address[] memory, uint256, uint256, uint256, uint256[] memory, uint256, uint256);
  function getGroupNumMembers(address) external view returns (uint256);
  function getTopGroupValidators(address, uint256) external view returns (address[] memory);
  function getGroupsNumMembers(address[] calldata accounts)
    external
    view
    returns (uint256[] memory);
  function getNumRegisteredValidators() external view returns (uint256);
  function groupMembershipInEpoch(address, uint256, uint256) external view returns (address);

  // only registered contract
  function updateEcdsaPublicKey(address, address, bytes calldata) external returns (bool);
  function updatePublicKeys(address, address, bytes calldata, bytes calldata, bytes calldata)
    external
    returns (bool);
  function getValidatorLockedGoldRequirements() external view returns (uint256, uint256);
  function getGroupLockedGoldRequirements() external view returns (uint256, uint256);
  function getRegisteredValidators() external view returns (address[] memory);
  function getRegisteredValidatorSigners() external view returns (address[] memory);
  function getRegisteredValidatorGroups() external view returns (address[] memory);
  function isValidatorGroup(address) external view returns (bool);
  function isValidator(address) external view returns (bool);
  function getValidatorGroupSlashingMultiplier(address) external view returns (uint256);
  function getMembershipInLastEpoch(address) external view returns (address);
  function getMembershipInLastEpochFromSigner(address) external view returns (address);

  // only VM
  function updateValidatorScoreFromSigner(address, uint256) external;
  function distributeEpochPaymentsFromSigner(address, uint256) external returns (uint256);

  // only slasher
  function forceDeaffiliateIfValidator(address) external;
  function halveSlashingMultiplier(address) external;

}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IAttestations {
  function revoke(bytes32, uint256) external;
  function withdraw(address) external;

  // view functions
  function getUnselectedRequest(bytes32, address) external view returns (uint32, uint32, address);
  function getAttestationIssuers(bytes32, address) external view returns (address[] memory);
  function getAttestationStats(bytes32, address) external view returns (uint32, uint32);
  function batchGetAttestationStats(bytes32[] calldata)
    external
    view
    returns (uint256[] memory, address[] memory, uint64[] memory, uint64[] memory);
  function getAttestationState(bytes32, address, address)
    external
    view
    returns (uint8, uint32, address);
  function getCompletableAttestations(bytes32, address)
    external
    view
    returns (uint32[] memory, address[] memory, uint256[] memory, bytes memory);
  function getAttestationRequestFee(address) external view returns (uint256);
  function getMaxAttestations() external view returns (uint256);
  function validateAttestationCode(bytes32, address, uint8, bytes32, bytes32)
    external
    view
    returns (address);
  function lookupAccountsForIdentifier(bytes32) external view returns (address[] memory);
  function requireNAttestationsRequested(bytes32, address, uint32) external view;

  // only owner
  function setAttestationRequestFee(address, uint256) external;
  function setAttestationExpiryBlocks(uint256) external;
  function setSelectIssuersWaitBlocks(uint256) external;
  function setMaxAttestations(uint256) external;
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface IRandom {
  function revealAndCommit(bytes32, bytes32, address) external;
  function randomnessBlockRetentionWindow() external view returns (uint256);
  function random() external view returns (bytes32);
  function getBlockRandomness(uint256) external view returns (bytes32);
}
          

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.5.13 <0.9.0;

interface ISortedOracles {
  function addOracle(address, address) external;
  function removeOracle(address, address, uint256) external;
  function report(address, uint256, address, address) external;
  function removeExpiredReports(address, uint256) external;
  function isOldestReportExpired(address token) external view returns (bool, address);
  function numRates(address) external view returns (uint256);
  function medianRate(address) external view returns (uint256, uint256);
  function numTimestamps(address) external view returns (uint256);
  function medianTimestamp(address) external view returns (uint256);
}
          

pragma solidity ^0.5.13;

interface IExchange {
    function buy(
        uint256,
        uint256,
        bool
    ) external returns (uint256);

    function sell(
        uint256,
        uint256,
        bool
    ) external returns (uint256);

    function exchange(
        uint256,
        uint256,
        bool
    ) external returns (uint256);

    function setUpdateFrequency(uint256) external;

    function getBuyTokenAmount(uint256, bool) external view returns (uint256);

    function getSellTokenAmount(uint256, bool) external view returns (uint256);

    function getBuyAndSellBuckets(bool) external view returns (uint256, uint256);
}
          

pragma solidity ^0.5.13;

interface IReserve {
    function setTobinTaxStalenessThreshold(uint256) external;

    function addToken(address) external returns (bool);

    function removeToken(address, uint256) external returns (bool);

    function transferGold(address payable, uint256) external returns (bool);

    function transferExchangeGold(address payable, uint256) external returns (bool);

    function getReserveGoldBalance() external view returns (uint256);

    function getUnfrozenReserveGoldBalance() external view returns (uint256);

    function getOrComputeTobinTax() external returns (uint256, uint256);

    function getTokens() external view returns (address[] memory);

    function getReserveRatio() external view returns (uint256);

    function addExchangeSpender(address) external;

    function removeExchangeSpender(address, uint256) external;

    function addSpender(address) external;

    function removeSpender(address) external;
}
          

pragma solidity ^0.5.13;

/**
 * @title This interface describes the functions specific to Celo Stable Tokens, and in the
 * absence of interface inheritance is intended as a companion to IERC20.sol and ICeloToken.sol.
 */
interface IStableToken {
    function mint(address, uint256) external returns (bool);

    function burn(uint256) external returns (bool);

    function setInflationParameters(uint256, uint256) external;

    function valueToUnits(uint256) external view returns (uint256);

    function unitsToValue(uint256) external view returns (uint256);

    function getInflationParameters()
        external
        view
        returns (
            uint256,
            uint256,
            uint256,
            uint256
        );

    // NOTE: duplicated with IERC20.sol, remove once interface inheritance is supported.
    function balanceOf(address) external view returns (uint256);
}
          

/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */

pragma solidity ^0.5.0;


library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add 
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
              add(add(end, iszero(add(length, mload(_preBytes)))), 31),
              not(31) // Round down to the nearest 32 bytes.
            ))
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes_slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes_slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes_slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes_slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(
                            fslot,
                            0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                        ),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes_slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes_slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                
                for { 
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint _start,
        uint _length
    )
        internal
        pure
        returns (bytes memory)
    {
        require(_bytes.length >= (_start + _length));

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint _start) internal  pure returns (address) {
        require(_bytes.length >= (_start + 20));
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint _start) internal  pure returns (uint8) {
        require(_bytes.length >= (_start + 1));
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint _start) internal  pure returns (uint16) {
        require(_bytes.length >= (_start + 2));
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint _start) internal  pure returns (uint32) {
        require(_bytes.length >= (_start + 4));
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint(bytes memory _bytes, uint _start) internal  pure returns (uint256) {
        require(_bytes.length >= (_start + 32));
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint _start) internal  pure returns (bytes32) {
        require(_bytes.length >= (_start + 32));
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
        internal
        view
        returns (bool)
    {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes_slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes_slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}