Address Details

contract

token

// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrrt(uint256 a) internal pure returns (uint256 c) {
        if (a > 3) {
            c = a;
            uint256 b = add(div(a, 2), 1);
            while (b < c) {
                c = b;
                b = div(add(div(a, b), b), 2);
            }
        } else if (a != 0) {
            c = 1;
        }
    }

    /*
     * Expects percentage to be trailed by 00,
     */
    function percentageAmount(uint256 total_, uint8 percentage_)
        internal
        pure
        returns (uint256 percentAmount_)
    {
        return div(mul(total_, percentage_), 1000);
    }

    /*
     * Expects percentage to be trailed by 00,
     */
    function substractPercentage(uint256 total_, uint8 percentageToSub_)
        internal
        pure
        returns (uint256 result_)
    {
        return sub(total_, div(mul(total_, percentageToSub_), 1000));
    }

    function percentageOfTotal(uint256 part_, uint256 total_)
        internal
        pure
        returns (uint256 percent_)
    {
        return div(mul(part_, 100), total_);
    }

    /**
     * Taken from Hypersonic https://github.com/M2629/HyperSonic/blob/main/Math.sol
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
    }

    function quadraticPricing(uint256 payment_, uint256 multiplier_)
        internal
        pure
        returns (uint256)
    {
        return sqrrt(mul(multiplier_, payment_));
    }

    function bondingCurve(uint256 supply_, uint256 multiplier_)
        internal
        pure
        returns (uint256)
    {
        return mul(multiplier_, supply_);
    }
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: weiValue}(
            data
        );
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

    function addressToString(address _address)
        internal
        pure
        returns (string memory)
    {
        bytes32 _bytes = bytes32(uint256(_address));
        bytes memory HEX = "0123456789abcdef";
        bytes memory _addr = new bytes(42);

        _addr[0] = "0";
        _addr[1] = "x";

        for (uint256 i = 0; i < 20; i++) {
            _addr[2 + i * 2] = HEX[uint8(_bytes[i + 12] >> 4)];
            _addr[3 + i * 2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
        }

        return string(_addr);
    }
}

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

abstract contract ERC20 is IERC20 {
    using SafeMath for uint256;

    // TODO comment actual hash value.
    bytes32 private constant ERC20TOKEN_ERC1820_INTERFACE_ID =
        keccak256("ERC20Token");

    // Present in ERC777
    mapping(address => uint256) internal _balances;

    // Present in ERC777
    mapping(address => mapping(address => uint256)) internal _allowances;

    // Present in ERC777
    uint256 internal _totalSupply;

    // Present in ERC777
    string internal _name;

    // Present in ERC777
    string internal _symbol;

    // Present in ERC777
    uint8 internal _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) {
        _name = name_;
        _symbol = symbol_;
        _decimals = decimals_;
    }

    /**
     * @dev Returns the name of the token.
     */
    // Present in ERC777
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    // Present in ERC777
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    // Present in ERC777
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    // Present in ERC777
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    // Present in ERC777
    function balanceOf(address account)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    // Overrideen in ERC777
    // Confirm that this behavior changes
    function transfer(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    // Present in ERC777
    function allowance(address owner, address spender)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    // Present in ERC777
    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _approve(msg.sender, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    // Present in ERC777
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            msg.sender,
            _allowances[sender][msg.sender].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            msg.sender,
            spender,
            _allowances[msg.sender][spender].add(addedValue)
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            msg.sender,
            spender,
            _allowances[msg.sender][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(
            amount,
            "ERC20: transfer amount exceeds balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    // Present in ERC777
    function _mint(address account_, uint256 ammount_) internal virtual {
        require(account_ != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(this), account_, ammount_);
        _totalSupply = _totalSupply.add(ammount_);
        _balances[account_] = _balances[account_].add(ammount_);
        emit Transfer(address(this), account_, ammount_);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    // Present in ERC777
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(
            amount,
            "ERC20: burn amount exceeds balance"
        );
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    // Present in ERC777
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    // Present in ERC777
    function _beforeTokenTransfer(
        address from_,
        address to_,
        uint256 amount_
    ) internal virtual {}
}

library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        // The {SafeMath} overflow check can be skipped here, see the comment at the top
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}

interface IERC2612Permit {
    /**
     * @dev Sets `amount` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current ERC2612 nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
}

abstract contract ERC20Permit is ERC20, IERC2612Permit {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH =
        0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    bytes32 public DOMAIN_SEPARATOR;

    constructor() {
        uint256 chainID;
        assembly {
            chainID := chainid()
        }

        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256(
                    "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
                ),
                keccak256(bytes(name())),
                keccak256(bytes("1")), // Version
                chainID,
                address(this)
            )
        );
    }

    /**
     * @dev See {IERC2612Permit-permit}.
     *
     */
    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "Permit: expired deadline");

        bytes32 hashStruct = keccak256(
            abi.encode(
                PERMIT_TYPEHASH,
                owner,
                spender,
                amount,
                _nonces[owner].current(),
                deadline
            )
        );

        bytes32 _hash = keccak256(
            abi.encodePacked(uint16(0x1901), DOMAIN_SEPARATOR, hashStruct)
        );

        address signer = ecrecover(_hash, v, r, s);
        require(
            signer != address(0) && signer == owner,
            "ZeroSwapPermit: Invalid signature"
        );

        _nonces[owner].increment();
        _approve(owner, spender, amount);
    }

    /**
     * @dev See {IERC2612Permit-nonces}.
     */
    function nonces(address owner) public view override returns (uint256) {
        return _nonces[owner].current();
    }
}

interface IOwnable {
    function manager() external view returns (address);

    function renounceManagement() external;

    function pushManagement(address newOwner_) external;

    function pullManagement() external;
}

contract Ownable is IOwnable {
    address internal _owner;
    address internal _newOwner;

    event OwnershipPushed(
        address indexed previousOwner,
        address indexed newOwner
    );
    event OwnershipPulled(
        address indexed previousOwner,
        address indexed newOwner
    );

    constructor() {
        _owner = msg.sender;
        emit OwnershipPushed(address(0), _owner);
    }

    function manager() public view override returns (address) {
        return _owner;
    }

    modifier onlyManager() {
        require(_owner == msg.sender, "Ownable: caller is not the owner");
        _;
    }

    function renounceManagement() public virtual override onlyManager {
        emit OwnershipPushed(_owner, address(0));
        _owner = address(0);
    }

    function pushManagement(address newOwner_)
        public
        virtual
        override
        onlyManager
    {
        require(
            newOwner_ != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipPushed(_owner, newOwner_);
        _newOwner = newOwner_;
    }

    function pullManagement() public virtual override {
        require(msg.sender == _newOwner, "Ownable: must be new owner to pull");
        emit OwnershipPulled(_owner, _newOwner);
        _owner = _newOwner;
    }
}

contract sImmortal is ERC20Permit, Ownable {
    using SafeMath for uint256;

    modifier onlyStakingContract() {
        require(msg.sender == stakingContract);
        _;
    }

    address public stakingContract;
    address public initializer;

    event LogSupply(
        uint256 indexed epoch,
        uint256 timestamp,
        uint256 totalSupply
    );
    event LogRebase(uint256 indexed epoch, uint256 rebase, uint256 index);
    event LogStakingContractUpdated(address stakingContract);

    struct Rebase {
        uint256 epoch;
        uint256 rebase; // 18 decimals
        uint256 totalStakedBefore;
        uint256 totalStakedAfter;
        uint256 amountRebased;
        uint256 index;
        uint32 timeOccured;
    }
    Rebase[] public rebases;

    uint256 public INDEX;

    uint256 private constant MAX_UINT256 = ~uint256(0);
    uint256 private constant INITIAL_FRAGMENTS_SUPPLY = 5000000 * 10**9;

    // TOTAL_GONS is a multiple of INITIAL_FRAGMENTS_SUPPLY so that _gonsPerFragment is an integer.
    // Use the highest value that fits in a uint256 for max granularity.
    uint256 private constant TOTAL_GONS =
        MAX_UINT256 - (MAX_UINT256 % INITIAL_FRAGMENTS_SUPPLY);

    // MAX_SUPPLY = maximum integer < (sqrt(4*TOTAL_GONS + 1) - 1) / 2
    uint256 private constant MAX_SUPPLY = ~uint128(0); // (2^128) - 1

    uint256 private _gonsPerFragment;
    mapping(address => uint256) private _gonBalances;

    mapping(address => mapping(address => uint256)) private _allowedValue;

    constructor() ERC20("Staked Immortal", "sIMMO", 9) ERC20Permit() {
        initializer = msg.sender;
        _totalSupply = INITIAL_FRAGMENTS_SUPPLY;
        _gonsPerFragment = TOTAL_GONS.div(_totalSupply);
    }

    function initialize(address stakingContract_) external returns (bool) {
        require(msg.sender == initializer);
        require(stakingContract_ != address(0));
        stakingContract = stakingContract_;
        _gonBalances[stakingContract] = TOTAL_GONS;

        emit Transfer(address(0x0), stakingContract, _totalSupply);
        emit LogStakingContractUpdated(stakingContract_);

        initializer = address(0);
        return true;
    }

    function setIndex(uint256 _INDEX) external onlyManager returns (bool) {
        require(INDEX == 0);
        INDEX = gonsForBalance(_INDEX);
        return true;
    }

    /**
        @notice increases sIMMO supply to increase staking balances relative to profit_
        @param profit_ uint256
        @return uint256
     */
    function rebase(uint256 profit_, uint256 epoch_)
        public
        onlyStakingContract
        returns (uint256)
    {
        uint256 rebaseAmount;
        uint256 circulatingSupply_ = circulatingSupply();

        if (profit_ == 0) {
            emit LogSupply(epoch_, block.timestamp, _totalSupply);
            emit LogRebase(epoch_, 0, index());
            return _totalSupply;
        } else if (circulatingSupply_ > 0) {
            rebaseAmount = profit_.mul(_totalSupply).div(circulatingSupply_);
        } else {
            rebaseAmount = profit_;
        }

        _totalSupply = _totalSupply.add(rebaseAmount);

        if (_totalSupply > MAX_SUPPLY) {
            _totalSupply = MAX_SUPPLY;
        }

        _gonsPerFragment = TOTAL_GONS.div(_totalSupply);

        _storeRebase(circulatingSupply_, profit_, epoch_);

        return _totalSupply;
    }

    /**
        @notice emits event with data about rebase
        @param previousCirculating_ uint
        @param profit_ uint
        @param epoch_ uint
        @return bool
     */
    function _storeRebase(
        uint256 previousCirculating_,
        uint256 profit_,
        uint256 epoch_
    ) internal returns (bool) {
        uint256 rebasePercent = profit_.mul(1e18).div(previousCirculating_);

        rebases.push(
            Rebase({
                epoch: epoch_,
                rebase: rebasePercent, // 18 decimals
                totalStakedBefore: previousCirculating_,
                totalStakedAfter: circulatingSupply(),
                amountRebased: profit_,
                index: index(),
                timeOccured: uint32(block.timestamp)
            })
        );

        emit LogSupply(epoch_, block.timestamp, _totalSupply);
        emit LogRebase(epoch_, rebasePercent, index());

        return true;
    }

    function balanceOf(address who) public view override returns (uint256) {
        return _gonBalances[who].div(_gonsPerFragment);
    }

    function gonsForBalance(uint256 amount) public view returns (uint256) {
        return amount.mul(_gonsPerFragment);
    }

    function balanceForGons(uint256 gons) public view returns (uint256) {
        return gons.div(_gonsPerFragment);
    }

    // Staking contract holds excess sIMMO
    function circulatingSupply() public view returns (uint256) {
        return _totalSupply.sub(balanceOf(stakingContract));
    }

    function index() public view returns (uint256) {
        return balanceForGons(INDEX);
    }

    function transfer(address to, uint256 value)
        public
        override
        returns (bool)
    {
        uint256 gonValue = value.mul(_gonsPerFragment);
        _gonBalances[msg.sender] = _gonBalances[msg.sender].sub(gonValue);
        _gonBalances[to] = _gonBalances[to].add(gonValue);
        emit Transfer(msg.sender, to, value);
        return true;
    }

    function allowance(address owner_, address spender)
        public
        view
        override
        returns (uint256)
    {
        return _allowedValue[owner_][spender];
    }

    function transferFrom(
        address from,
        address to,
        uint256 value
    ) public override returns (bool) {
        _allowedValue[from][msg.sender] = _allowedValue[from][msg.sender].sub(
            value
        );
        emit Approval(from, msg.sender, _allowedValue[from][msg.sender]);

        uint256 gonValue = gonsForBalance(value);
        _gonBalances[from] = _gonBalances[from].sub(gonValue);
        _gonBalances[to] = _gonBalances[to].add(gonValue);
        emit Transfer(from, to, value);

        return true;
    }

    function approve(address spender, uint256 value)
        public
        override
        returns (bool)
    {
        _allowedValue[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    // What gets called in a permit
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual override {
        _allowedValue[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function increaseAllowance(address spender, uint256 addedValue)
        public
        override
        returns (bool)
    {
        _allowedValue[msg.sender][spender] = _allowedValue[msg.sender][spender]
            .add(addedValue);
        emit Approval(msg.sender, spender, _allowedValue[msg.sender][spender]);
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        override
        returns (bool)
    {
        uint256 oldValue = _allowedValue[msg.sender][spender];
        if (subtractedValue >= oldValue) {
            _allowedValue[msg.sender][spender] = 0;
        } else {
            _allowedValue[msg.sender][spender] = oldValue.sub(subtractedValue);
        }
        emit Approval(msg.sender, spender, _allowedValue[msg.sender][spender]);
        return true;
    }
}