Address Details

contract

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import {
    ISuperfluid,
    ISuperToken,
    BatchOperation,
    FlowOperatorDefinitions
} from "../interfaces/superfluid/ISuperfluid.sol";

import {
    IConstantFlowAgreementV1
} from "../interfaces/agreements/IConstantFlowAgreementV1.sol";

import { CallUtils } from "../libs/CallUtils.sol";

/**
 * Contract address: 
 * The CFAv1Forwarder contract provides an easy to use interface to
 * ConstantFlowAgreementV1 specific functionality of Super Tokens.
 * Instances of this contract can operate on the protocol only if configured as "trusted forwarder"
 * by protocol governance.
 */
contract CFAv1Forwarder {
    error CFA_FWD_INVALID_FLOW_RATE();

    ISuperfluid internal immutable _host;
    IConstantFlowAgreementV1 internal immutable _cfa;

    // is tied to a specific instance of host and agreement contracts at deploy time
    constructor(ISuperfluid host) {
        _host = host;
        _cfa = IConstantFlowAgreementV1(address(_host.getAgreementClass(
            keccak256("org.superfluid-finance.agreements.ConstantFlowAgreement.v1")
        )));
    }

    /**
     * @notice Sets the given flowrate between msg.sender and a given receiver.
     * If there's no pre-existing flow and `flowrate` non-zero, a new flow is created.
     * If there's an existing flow and `flowrate` non-zero, the flowrate of that flow is updated.
     * If there's an existing flow and `flowrate` zero, the flow is deleted.
     * If the existing and given flowrate are equal, no action is taken.
     * On creation of a flow, a "buffer" amount is automatically detracted from the sender account's available balance.
     * If the sender account is solvent when the flow is deleted, this buffer is redeemed to it.
     * @param token Super token address
     * @param receiver The receiver of the flow
     * @param flowrate The wanted flowrate in wad/second. Only positive values are valid here.
     * @return bool
     */
    function setFlowrate(ISuperToken token, address receiver, int96 flowrate) external returns (bool) {
       return _setFlowrateFrom(token, msg.sender, receiver, flowrate);
    }

    /**
     * @notice Like `setFlowrate`, but can be invoked by an account with flowOperator permissions
     * on behalf of the sender account.
     * @param token Super token address
     * @param sender The sender of the flow
     * @param receiver The receiver of the flow
     * @param flowrate The wanted flowrate in wad/second. Only positive values are valid here.
     * @return bool
     */
    function setFlowrateFrom(
        ISuperToken token,
        address sender,
        address receiver,
        int96 flowrate
    ) external returns (bool) {
        return _setFlowrateFrom(token, sender, receiver, flowrate);
    }

    /**
     * @notice Get the flowrate of the flow between 2 accounts if exists.
     * @dev Currently, only 0 or 1 flows can exist between 2 accounts. This may change in the future.
     * @param token Super token address
     * @param sender The sender of the flow
     * @param receiver The receiver of the flow
     * @return flowrate The flowrate from the sender to the receiver account. Returns 0 if no flow exists.
     */
    function getFlowrate(ISuperToken token, address sender, address receiver) external view
        returns(int96 flowrate)
    {
        (, flowrate, , ) = _cfa.getFlow(token, sender, receiver);
    }

    /**
     * @notice Get all available information about a flow (if exists).
     * If only the flowrate is needed, consider using `getFlowrate` instead.
     * @param token Super token address
     * @param sender The sender of the flow
     * @param receiver The receiver of the flow
     * @return lastUpdated Timestamp of last update (flowrate change) or zero if no flow exists
     * @return flowrate Current flowrate of the flow or zero if no flow exists
     * @return deposit Deposit amount locked as security buffer during the lifetime of the flow
     * @return owedDeposit Extra deposit amount borrowed to a SuperApp receiver by the flow sender
     */
    function getFlowInfo(ISuperToken token, address sender, address receiver) external view
        returns(uint256 lastUpdated, int96 flowrate, uint256 deposit, uint256 owedDeposit)
    {
        (lastUpdated, flowrate, deposit, owedDeposit) = _cfa.getFlow(token, sender, receiver);
    }

    /**
     * @notice Get the buffer amount required for the given token and flowrate.
     * This amount can vary based on the combination of token, flowrate and chain being queried.
     * The result for a given set of parameters can change over time,
     * because it depends on governance configurable protocol parameters.
     * Changes of the required buffer amount affect only flows created or updated after the change.
     * @param token Super token address
     * @param flowrate The flowrate for which the buffer amount is calculated
     * @return bufferAmount The buffer amount required for the given configuration.
     */
    function getBufferAmountByFlowrate(ISuperToken token, int96 flowrate) external view
        returns (uint256 bufferAmount)
    {
        return _cfa.getDepositRequiredForFlowRate(token, flowrate);
    }

    /**
     * @notice Get the net flowrate of an account.
     * @param token Super token address
     * @param account Account to query
     * @return flowrate The net flowrate (aggregate incoming minus aggregate outgoing flowrate), can be negative.
     */
    function getAccountFlowrate(ISuperToken token, address account) external view
        returns (int96 flowrate)
    {
        return _cfa.getNetFlow(token, account);
    }

    /**
     * @notice Get aggregated flow information (if any exist) of an account.
     * If only the net flowrate is needed, consider using `getAccountFlowrate` instead.
     * @param token Super token address
     * @param account Account to query
     * @return lastUpdated Timestamp of last update of a flow to or from the account (flowrate change)
     * @return flowrate Current net aggregate flowrate
     * @return deposit Aggregate deposit amount currently locked as security buffer for outgoing flows
     * @return owedDeposit Aggregate extra deposit amount currently borrowed to SuperApps receiving from this account
     */
    function getAccountFlowInfo(ISuperToken token, address account) external view
        returns (uint256 lastUpdated, int96 flowrate, uint256 deposit, uint256 owedDeposit)
    {
        return _cfa.getAccountFlowInfo(token, account);
    }

    /**
     * @notice Low-level wrapper of createFlow/createFlowByOperator.
     * If the address of msg.sender is not the same as the address of the `sender` argument,
     * createFlowByOperator is used internally. In this case msg.sender needs to have permission to create flows
     * on behalf of the given sender account with sufficient flowRateAllowance.
     * Currently, only 1 flow can exist between 2 accounts, thus `createFlow` will fail if one already exists.
     * @param token Super token address
     * @param sender Sender address of the flow
     * @param receiver Receiver address of the flow
     * @param flowrate The flowrate in wad/second to be set initially
     * @param userData (optional) User data to be set. Should be set to zero if not needed.
     * @return bool
     */
    function createFlow(ISuperToken token, address sender, address receiver, int96 flowrate, bytes memory userData)
        external returns (bool)
    {
        return _createFlow(token, sender, receiver, flowrate, userData);
    }

    /**
     * @notice Low-level wrapper if updateFlow/updateFlowByOperator.
     * If the address of msg.sender doesn't match the address of the `sender` argument,
     * updateFlowByOperator is invoked. In this case msg.sender needs to have permission to update flows
     * on behalf of the given sender account with sufficient flowRateAllowance.
     * @param token Super token address
     * @param sender Sender address of the flow
     * @param receiver Receiver address of the flow
     * @param flowrate The flowrate in wad/second the flow should be updated to
     * @param userData (optional) User data to be set. Should be set to zero if not needed.
     * @return bool
     */
    function updateFlow(ISuperToken token, address sender, address receiver, int96 flowrate, bytes memory userData)
        external returns (bool)
    {
        return _updateFlow(token, sender, receiver, flowrate, userData);
    }

    /**
     * @notice Low-level wrapper of deleteFlow/deleteFlowByOperator.
     * If msg.sender isn't the same as sender address, msg.sender needs to have permission
     * to delete flows on behalf of the given sender account.
     * @param token Super token address
     * @param sender Sender address of the flow
     * @param receiver Receiver address of the flow
     * @param userData (optional) User data to be set. Should be set to zero if not needed.
     * @return bool
     */
    function deleteFlow(
        ISuperToken token,
        address sender,
        address receiver,
        bytes memory userData
    ) 
        external returns (bool)
    {
        return _deleteFlow(token, sender, receiver, userData);
    }

    /**
     * @notice Grants a flowOperator permission to create/update/delete flows on behalf of msg.sender.
     * In order to restrict what a flowOperator can or can't do, the flowOperator account
     * should be a contract implementing the desired restrictions.
     * @param token Super token address
     * @param flowOperator Account to which permissions are granted
     * @return bool
     */
    function grantPermissions(ISuperToken token, address flowOperator) external returns (bool)
    {
        return _updateFlowOperatorPermissions(
            token,
            flowOperator,
            FlowOperatorDefinitions.AUTHORIZE_FULL_CONTROL,
            type(int96).max
        );
    }

    /**
     * @notice Revokes all permissions previously granted to a flowOperator by msg.sender.
     * Revocation doesn't undo or reset flows previously created/updated by the flowOperator.
     * In order to be sure about the state of flows at the time of revocation, you need to check that state
     * either in the same transaction or after this transaction.
     * @param token Super token address
     * @param flowOperator Account from which permissions are revoked
     * @return bool
     */
    function revokePermissions(ISuperToken token, address flowOperator) external returns (bool)
    {
        return _updateFlowOperatorPermissions(
            token,
            flowOperator,
            0,
            0
        );
    }

    /**
     * @notice Low-level wrapper of `IConstantFlowAgreementV1.updateFlowOperatorPermissions`
     * @param token Super token address
     * @param flowOperator Account for which permissions are set on behalf of msg.sender
     * @param permissions Bitmask for create/update/delete permission flags. See library `FlowOperatorDefinitions`
     * @param flowrateAllowance Max. flowrate in wad/second the operator can set for individual flows.
     * @return bool
     * @notice flowrateAllowance does NOT restrict the net flowrate a flowOperator is able to set.
     * In order to restrict that, flowOperator needs to be a contract implementing the wanted limitations.
     */
    function updateFlowOperatorPermissions(
        ISuperToken token,
        address flowOperator,
        uint8 permissions,
        int96 flowrateAllowance
    )
        external returns (bool)
    {
        return _updateFlowOperatorPermissions(token, flowOperator, permissions, flowrateAllowance);
    }

    /**
     * @notice Get the currently set permissions granted to the given flowOperator by the given sender account.
     * @param token Super token address
     * @param sender The account which (possiby) granted permissions
     * @param flowOperator Account to which (possibly) permissions were granted
     * @return permissions A bitmask of the permissions currently granted (or not) by `sender` to `flowOperator`
     * @return flowrateAllowance Max. flowrate in wad/second the flowOperator can set for individual flows.
     */
    function getFlowOperatorPermissions(ISuperToken token, address sender, address flowOperator) external view
        returns (uint8 permissions, int96 flowrateAllowance)
    {
        (, permissions, flowrateAllowance) = _cfa.getFlowOperatorData(token, sender, flowOperator);
    }

    /**************************************************************************
     * Internal functions
     *************************************************************************/

    function _setFlowrateFrom(
        ISuperToken token,
        address sender,
        address receiver,
        int96 flowrate
    ) internal returns (bool) {
        (, int96 prevFlowRate,,) = _cfa.getFlow(token, sender, receiver);

        if (flowrate > 0) {
            if (prevFlowRate == 0) {
                return _createFlow(token, sender, receiver, flowrate, new bytes(0));
            } else if (prevFlowRate != flowrate) {
                return _updateFlow(token, sender, receiver, flowrate, new bytes(0));
            } // else no change, do nothing
            return true;
        } else if (flowrate == 0) {
            if (prevFlowRate > 0) {
                return _deleteFlow(token, sender, receiver, new bytes(0));
            } // else no change, do nothing
            return true;
        } else {
            revert CFA_FWD_INVALID_FLOW_RATE();
        }
    }

    function _createFlow(
        ISuperToken token,
        address sender,
        address receiver,
        int96 flowrate,
        bytes memory userData
    )
        internal returns (bool)
    {
        bytes memory cfaCallData = sender == msg.sender ?
            abi.encodeCall(
                _cfa.createFlow,
                (
                    token,
                    receiver,
                    flowrate,
                    new bytes(0) // placeholder
                )
            ) :
            abi.encodeCall(
                _cfa.createFlowByOperator,
                (
                    token,
                    sender,
                    receiver,
                    flowrate,
                    new bytes(0) // placeholder
                )
            );

        return _forwardBatchCall(address(_cfa), cfaCallData, userData);
    }

    function _updateFlow(
        ISuperToken token,
        address sender,
        address receiver,
        int96 flowrate,
        bytes memory userData
    )
        internal returns (bool)
    {
        bytes memory cfaCallData = sender == msg.sender ?
            abi.encodeCall(
                _cfa.updateFlow,
                (
                    token,
                    receiver,
                    flowrate,
                    new bytes(0) // placeholder
                )
            ) :
            abi.encodeCall(
                _cfa.updateFlowByOperator,
                (
                    token,
                    sender,
                    receiver,
                    flowrate,
                    new bytes(0) // placeholder
                )
            );

        return _forwardBatchCall(address(_cfa), cfaCallData, userData);
    }

    function _deleteFlow(
        ISuperToken token,
        address sender,
        address receiver,
        bytes memory userData
    )
        internal returns (bool)
    {
        bytes memory cfaCallData = sender == msg.sender || receiver == msg.sender ?
            abi.encodeCall(
                _cfa.deleteFlow,
                (
                    token,
                    sender,
                    receiver,
                    new bytes(0) // placeholder
                )
            ) :
            abi.encodeCall(
                _cfa.deleteFlowByOperator,
                (
                    token,
                    sender,
                    receiver,
                    new bytes(0) // placeholder
                )
            );

        return _forwardBatchCall(address(_cfa), cfaCallData, userData);
    }

    function _updateFlowOperatorPermissions(
        ISuperToken token,
        address flowOperator,
        uint8 permissions,
        int96 flowrateAllowance
    )
        internal returns (bool)
    {
        bytes memory cfaCallData =
            abi.encodeCall(
                _cfa.updateFlowOperatorPermissions,
                (
                    token,
                    flowOperator,
                    permissions,
                    flowrateAllowance,
                    new bytes(0) // placeholder
                )
            );

        return _forwardBatchCall(address(_cfa), cfaCallData, new bytes(0));
    }

    // compiles the calldata of a single operation for the host invocation and executes it
    function _forwardBatchCall(address target, bytes memory callData, bytes memory userData) internal returns (bool) {
        ISuperfluid.Operation[] memory ops = new ISuperfluid.Operation[](1);
        ops[0] = ISuperfluid.Operation(
            BatchOperation.OPERATION_TYPE_SUPERFLUID_CALL_AGREEMENT, // type
            address(target), // target
            abi.encode( // data
                callData,
                userData
            )
        );

        bytes memory fwBatchCallData = abi.encodeCall(
            _host.forwardBatchCall,
            (
                ops
            )
        );

        // https://eips.ethereum.org/EIPS/eip-2771
        // we encode the msg.sender as the last 20 bytes per EIP-2771 to extract the original txn signer later on
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returnedData) = address(_host).call(abi.encodePacked(fwBatchCallData, msg.sender));

        if (!success) {
            CallUtils.revertFromReturnedData(returnedData);
        }

        return true;
    }
}
        

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC777/IERC777.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC777Token standard as defined in the EIP.
 *
 * This contract uses the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 registry standard] to let
 * token holders and recipients react to token movements by using setting implementers
 * for the associated interfaces in said registry. See {IERC1820Registry} and
 * {ERC1820Implementer}.
 */
interface IERC777 {
    /**
     * @dev Emitted when `amount` tokens are created by `operator` and assigned to `to`.
     *
     * Note that some additional user `data` and `operatorData` can be logged in the event.
     */
    event Minted(address indexed operator, address indexed to, uint256 amount, bytes data, bytes operatorData);

    /**
     * @dev Emitted when `operator` destroys `amount` tokens from `account`.
     *
     * Note that some additional user `data` and `operatorData` can be logged in the event.
     */
    event Burned(address indexed operator, address indexed from, uint256 amount, bytes data, bytes operatorData);

    /**
     * @dev Emitted when `operator` is made operator for `tokenHolder`.
     */
    event AuthorizedOperator(address indexed operator, address indexed tokenHolder);

    /**
     * @dev Emitted when `operator` is revoked its operator status for `tokenHolder`.
     */
    event RevokedOperator(address indexed operator, address indexed tokenHolder);

    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the smallest part of the token that is not divisible. This
     * means all token operations (creation, movement and destruction) must have
     * amounts that are a multiple of this number.
     *
     * For most token contracts, this value will equal 1.
     */
    function granularity() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by an account (`owner`).
     */
    function balanceOf(address owner) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * If send or receive hooks are registered for the caller and `recipient`,
     * the corresponding functions will be called with `data` and empty
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function send(
        address recipient,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev Destroys `amount` tokens from the caller's account, reducing the
     * total supply.
     *
     * If a send hook is registered for the caller, the corresponding function
     * will be called with `data` and empty `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     */
    function burn(uint256 amount, bytes calldata data) external;

    /**
     * @dev Returns true if an account is an operator of `tokenHolder`.
     * Operators can send and burn tokens on behalf of their owners. All
     * accounts are their own operator.
     *
     * See {operatorSend} and {operatorBurn}.
     */
    function isOperatorFor(address operator, address tokenHolder) external view returns (bool);

    /**
     * @dev Make an account an operator of the caller.
     *
     * See {isOperatorFor}.
     *
     * Emits an {AuthorizedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function authorizeOperator(address operator) external;

    /**
     * @dev Revoke an account's operator status for the caller.
     *
     * See {isOperatorFor} and {defaultOperators}.
     *
     * Emits a {RevokedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function revokeOperator(address operator) external;

    /**
     * @dev Returns the list of default operators. These accounts are operators
     * for all token holders, even if {authorizeOperator} was never called on
     * them.
     *
     * This list is immutable, but individual holders may revoke these via
     * {revokeOperator}, in which case {isOperatorFor} will return false.
     */
    function defaultOperators() external view returns (address[] memory);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient`. The caller must
     * be an operator of `sender`.
     *
     * If send or receive hooks are registered for `sender` and `recipient`,
     * the corresponding functions will be called with `data` and
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - `sender` cannot be the zero address.
     * - `sender` must have at least `amount` tokens.
     * - the caller must be an operator for `sender`.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function operatorSend(
        address sender,
        address recipient,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external;

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the total supply.
     * The caller must be an operator of `account`.
     *
     * If a send hook is registered for `account`, the corresponding function
     * will be called with `data` and `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     * - the caller must be an operator for `account`.
     */
    function operatorBurn(
        address account,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external;

    event Sent(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes data,
        bytes operatorData
    );
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperAgreement } from "../superfluid/ISuperAgreement.sol";
import { ISuperfluidToken } from "../superfluid/ISuperfluidToken.sol";

/**
 * @title Constant Flow Agreement interface
 * @author Superfluid
 */
abstract contract IConstantFlowAgreementV1 is ISuperAgreement {

    /**************************************************************************
     * Errors
     *************************************************************************/
    error CFA_ACL_NO_SENDER_CREATE();               // 0x4b993136
    error CFA_ACL_NO_SENDER_UPDATE();               // 0xedfa0d3b
    error CFA_ACL_OPERATOR_NO_CREATE_PERMISSIONS(); // 0xa3eab6ac
    error CFA_ACL_OPERATOR_NO_UPDATE_PERMISSIONS(); // 0xac434b5f
    error CFA_ACL_OPERATOR_NO_DELETE_PERMISSIONS(); // 0xe30f1bff
    error CFA_ACL_FLOW_RATE_ALLOWANCE_EXCEEDED();   // 0xa0645c1f
    error CFA_ACL_UNCLEAN_PERMISSIONS();            // 0x7939d66c
    error CFA_ACL_NO_SENDER_FLOW_OPERATOR();        // 0xb0ed394d
    error CFA_ACL_NO_NEGATIVE_ALLOWANCE();          // 0x86e0377d
    error CFA_FLOW_ALREADY_EXISTS();                // 0x801b6863
    error CFA_FLOW_DOES_NOT_EXIST();                // 0x5a32bf24
    error CFA_INSUFFICIENT_BALANCE();               // 0xea76c9b3
    error CFA_ZERO_ADDRESS_SENDER();                // 0x1ce9b067
    error CFA_ZERO_ADDRESS_RECEIVER();              // 0x78e02b2a
    error CFA_HOOK_OUT_OF_GAS();                    // 0x9f76430b
    error CFA_DEPOSIT_TOO_BIG();                    // 0x752c2b9c
    error CFA_FLOW_RATE_TOO_BIG();                  // 0x0c9c55c1
    error CFA_NON_CRITICAL_SENDER();                // 0xce11b5d1
    error CFA_INVALID_FLOW_RATE();                  // 0x91acad16
    error CFA_NO_SELF_FLOW();                       // 0xa47338ef

    /// @dev ISuperAgreement.agreementType implementation
    function agreementType() external override pure returns (bytes32) {
        return keccak256("org.superfluid-finance.agreements.ConstantFlowAgreement.v1");
    }

    /**
     * @notice Get the maximum flow rate allowed with the deposit
     * @dev The deposit is clipped and rounded down
     * @param deposit Deposit amount used for creating the flow
     * @return flowRate The maximum flow rate
     */
    function getMaximumFlowRateFromDeposit(
        ISuperfluidToken token,
        uint256 deposit)
        external view virtual
        returns (int96 flowRate);

    /**
     * @notice Get the deposit required for creating the flow
     * @dev Calculates the deposit based on the liquidationPeriod and flowRate
     * @param flowRate Flow rate to be tested
     * @return deposit The deposit amount based on flowRate and liquidationPeriod
     * @custom:note 
     * - if calculated deposit (flowRate * liquidationPeriod) is less
     *   than the minimum deposit, we use the minimum deposit otherwise
     *   we use the calculated deposit
     */
    function getDepositRequiredForFlowRate(
        ISuperfluidToken token,
        int96 flowRate)
        external view virtual
        returns (uint256 deposit);

    /**
     * @dev Returns whether it is the patrician period based on host.getNow()
     * @param account The account we are interested in
     * @return isCurrentlyPatricianPeriod Whether it is currently the patrician period dictated by governance
     * @return timestamp The value of host.getNow()
     */
    function isPatricianPeriodNow(
        ISuperfluidToken token,
        address account)
        external view virtual
        returns (bool isCurrentlyPatricianPeriod, uint256 timestamp);

    /**
     * @dev Returns whether it is the patrician period based on timestamp
     * @param account The account we are interested in
     * @param timestamp The timestamp we are interested in observing the result of isPatricianPeriod
     * @return bool Whether it is currently the patrician period dictated by governance
     */
    function isPatricianPeriod(
        ISuperfluidToken token,
        address account,
        uint256 timestamp
    )
        public view virtual
        returns (bool);

    /**
     * @dev msgSender from `ctx` updates permissions for the `flowOperator` with `flowRateAllowance`
     * @param token Super token address
     * @param flowOperator The permission grantee address
     * @param permissions A bitmask representation of the granted permissions
     * @param flowRateAllowance The flow rate allowance the `flowOperator` is granted (only goes down)
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     */
    function updateFlowOperatorPermissions(
        ISuperfluidToken token,
        address flowOperator,
        uint8 permissions,
        int96 flowRateAllowance,
        bytes calldata ctx
    ) 
        external virtual
        returns(bytes memory newCtx);

    /**
     * @dev msgSender from `ctx` grants `flowOperator` all permissions with flowRateAllowance as type(int96).max
     * @param token Super token address
     * @param flowOperator The permission grantee address
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     */
    function authorizeFlowOperatorWithFullControl(
        ISuperfluidToken token,
        address flowOperator,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

     /**
     * @notice msgSender from `ctx` revokes `flowOperator` create/update/delete permissions
     * @dev `permissions` and `flowRateAllowance` will both be set to 0
     * @param token Super token address
     * @param flowOperator The permission grantee address
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     */
    function revokeFlowOperatorWithFullControl(
        ISuperfluidToken token,
        address flowOperator,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
     * @notice Get the permissions of a flow operator between `sender` and `flowOperator` for `token`
     * @param token Super token address
     * @param sender The permission granter address
     * @param flowOperator The permission grantee address
     * @return flowOperatorId The keccak256 hash of encoded string "flowOperator", sender and flowOperator
     * @return permissions A bitmask representation of the granted permissions
     * @return flowRateAllowance The flow rate allowance the `flowOperator` is granted (only goes down)
     */
    function getFlowOperatorData(
       ISuperfluidToken token,
       address sender,
       address flowOperator
    )
        public view virtual
        returns (
            bytes32 flowOperatorId,
            uint8 permissions,
            int96 flowRateAllowance
        );

    /**
     * @notice Get flow operator using flowOperatorId
     * @param token Super token address
     * @param flowOperatorId The keccak256 hash of encoded string "flowOperator", sender and flowOperator
     * @return permissions A bitmask representation of the granted permissions
     * @return flowRateAllowance The flow rate allowance the `flowOperator` is granted (only goes down)
     */
    function getFlowOperatorDataByID(
       ISuperfluidToken token,
       bytes32 flowOperatorId
    )
        external view virtual
        returns (
            uint8 permissions,
            int96 flowRateAllowance
        );

    /**
     * @notice Create a flow betwen ctx.msgSender and receiver
     * @dev flowId (agreementId) is the keccak256 hash of encoded sender and receiver
     * @param token Super token address
     * @param receiver Flow receiver address
     * @param flowRate New flow rate in amount per second
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     *
     * @custom:callbacks 
     * - AgreementCreated
     *   - agreementId - can be used in getFlowByID
     *   - agreementData - abi.encode(address flowSender, address flowReceiver)
     *
     * @custom:note 
     * - A deposit is taken as safety margin for the solvency agents
     * - A extra gas fee may be taken to pay for solvency agent liquidations
     */
    function createFlow(
        ISuperfluidToken token,
        address receiver,
        int96 flowRate,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
    * @notice Create a flow between sender and receiver
    * @dev A flow created by an approved flow operator (see above for details on callbacks)
    * @param token Super token address
    * @param sender Flow sender address (has granted permissions)
    * @param receiver Flow receiver address
    * @param flowRate New flow rate in amount per second
    * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
    */
    function createFlowByOperator(
        ISuperfluidToken token,
        address sender,
        address receiver,
        int96 flowRate,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
     * @notice Update the flow rate between ctx.msgSender and receiver
     * @dev flowId (agreementId) is the keccak256 hash of encoded sender and receiver
     * @param token Super token address
     * @param receiver Flow receiver address
     * @param flowRate New flow rate in amount per second
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     *
     * @custom:callbacks 
     * - AgreementUpdated
     *   - agreementId - can be used in getFlowByID
     *   - agreementData - abi.encode(address flowSender, address flowReceiver)
     *
     * @custom:note 
     * - Only the flow sender may update the flow rate
     * - Even if the flow rate is zero, the flow is not deleted
     * from the system
     * - Deposit amount will be adjusted accordingly
     * - No new gas fee is charged
     */
    function updateFlow(
        ISuperfluidToken token,
        address receiver,
        int96 flowRate,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
    * @notice Update a flow between sender and receiver
    * @dev A flow updated by an approved flow operator (see above for details on callbacks)
    * @param token Super token address
    * @param sender Flow sender address (has granted permissions)
    * @param receiver Flow receiver address
    * @param flowRate New flow rate in amount per second
    * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
    */
    function updateFlowByOperator(
        ISuperfluidToken token,
        address sender,
        address receiver,
        int96 flowRate,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
     * @dev Get the flow data between `sender` and `receiver` of `token`
     * @param token Super token address
     * @param sender Flow receiver
     * @param receiver Flow sender
     * @return timestamp Timestamp of when the flow is updated
     * @return flowRate The flow rate
     * @return deposit The amount of deposit the flow
     * @return owedDeposit The amount of owed deposit of the flow
     */
    function getFlow(
        ISuperfluidToken token,
        address sender,
        address receiver
    )
        external view virtual
        returns (
            uint256 timestamp,
            int96 flowRate,
            uint256 deposit,
            uint256 owedDeposit
        );

    /**
     * @notice Get flow data using agreementId
     * @dev flowId (agreementId) is the keccak256 hash of encoded sender and receiver
     * @param token Super token address
     * @param agreementId The agreement ID
     * @return timestamp Timestamp of when the flow is updated
     * @return flowRate The flow rate
     * @return deposit The deposit amount of the flow
     * @return owedDeposit The owed deposit amount of the flow
     */
    function getFlowByID(
       ISuperfluidToken token,
       bytes32 agreementId
    )
        external view virtual
        returns (
            uint256 timestamp,
            int96 flowRate,
            uint256 deposit,
            uint256 owedDeposit
        );

    /**
     * @dev Get the aggregated flow info of the account
     * @param token Super token address
     * @param account Account for the query
     * @return timestamp Timestamp of when a flow was last updated for account
     * @return flowRate The net flow rate of token for account
     * @return deposit The sum of all deposits for account's flows
     * @return owedDeposit The sum of all owed deposits for account's flows
     */
    function getAccountFlowInfo(
        ISuperfluidToken token,
        address account
    )
        external view virtual
        returns (
            uint256 timestamp,
            int96 flowRate,
            uint256 deposit,
            uint256 owedDeposit);

    /**
     * @dev Get the net flow rate of the account
     * @param token Super token address
     * @param account Account for the query
     * @return flowRate Net flow rate
     */
    function getNetFlow(
        ISuperfluidToken token,
        address account
    )
        external view virtual
        returns (int96 flowRate);

    /**
     * @notice Delete the flow between sender and receiver
     * @dev flowId (agreementId) is the keccak256 hash of encoded sender and receiver
     * @param token Super token address
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     * @param receiver Flow receiver address
     *
     * @custom:callbacks 
     * - AgreementTerminated
     *   - agreementId - can be used in getFlowByID
     *   - agreementData - abi.encode(address flowSender, address flowReceiver)
     *
     * @custom:note 
     * - Both flow sender and receiver may delete the flow
     * - If Sender account is insolvent or in critical state, a solvency agent may
     *   also terminate the agreement
     * - Gas fee may be returned to the sender
     */
    function deleteFlow(
        ISuperfluidToken token,
        address sender,
        address receiver,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);

    /**
     * @notice Delete the flow between sender and receiver
     * @dev A flow deleted by an approved flow operator (see above for details on callbacks)
     * @param token Super token address
     * @param ctx Context bytes (see ISuperfluid.sol for Context struct)
     * @param receiver Flow receiver address
     */
    function deleteFlowByOperator(
        ISuperfluidToken token,
        address sender,
        address receiver,
        bytes calldata ctx
    )
        external virtual
        returns(bytes memory newCtx);
     
    /**
     * @dev Flow operator updated event
     * @param token Super token address
     * @param sender Flow sender address
     * @param flowOperator Flow operator address
     * @param permissions Octo bitmask representation of permissions
     * @param flowRateAllowance The flow rate allowance the `flowOperator` is granted (only goes down)
     */
    event FlowOperatorUpdated(
        ISuperfluidToken indexed token,
        address indexed sender,
        address indexed flowOperator,
        uint8 permissions,
        int96 flowRateAllowance
    );

    /**
     * @dev Flow updated event
     * @param token Super token address
     * @param sender Flow sender address
     * @param receiver Flow recipient address
     * @param flowRate Flow rate in amount per second for this flow
     * @param totalSenderFlowRate Total flow rate in amount per second for the sender
     * @param totalReceiverFlowRate Total flow rate in amount per second for the receiver
     * @param userData The user provided data
     *
     */
    event FlowUpdated(
        ISuperfluidToken indexed token,
        address indexed sender,
        address indexed receiver,
        int96 flowRate,
        int256 totalSenderFlowRate,
        int256 totalReceiverFlowRate,
        bytes userData
    );

    /**
     * @dev Flow updated extension event
     * @param flowOperator Flow operator address - the Context.msgSender
     * @param deposit The deposit amount for the stream
     */
    event FlowUpdatedExtension(
        address indexed flowOperator,
        uint256 deposit
    );
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

/**
 * @title Super app definitions library
 * @author Superfluid
 */
library SuperAppDefinitions {

    /**************************************************************************
    / App manifest config word
    /**************************************************************************/

    /*
     * App level is a way to allow the app to whitelist what other app it can
     * interact with (aka. composite app feature).
     *
     * For more details, refer to the technical paper of superfluid protocol.
     */
    uint256 constant internal APP_LEVEL_MASK = 0xFF;

    // The app is at the final level, hence it doesn't want to interact with any other app
    uint256 constant internal APP_LEVEL_FINAL = 1 << 0;

    // The app is at the second level, it may interact with other final level apps if whitelisted
    uint256 constant internal APP_LEVEL_SECOND = 1 << 1;

    function getAppCallbackLevel(uint256 configWord) internal pure returns (uint8) {
        return uint8(configWord & APP_LEVEL_MASK);
    }

    uint256 constant internal APP_JAIL_BIT = 1 << 15;
    function isAppJailed(uint256 configWord) internal pure returns (bool) {
        return (configWord & SuperAppDefinitions.APP_JAIL_BIT) > 0;
    }

    /**************************************************************************
    / Callback implementation bit masks
    /**************************************************************************/
    uint256 constant internal AGREEMENT_CALLBACK_NOOP_BITMASKS = 0xFF << 32;
    uint256 constant internal BEFORE_AGREEMENT_CREATED_NOOP = 1 << (32 + 0);
    uint256 constant internal AFTER_AGREEMENT_CREATED_NOOP = 1 << (32 + 1);
    uint256 constant internal BEFORE_AGREEMENT_UPDATED_NOOP = 1 << (32 + 2);
    uint256 constant internal AFTER_AGREEMENT_UPDATED_NOOP = 1 << (32 + 3);
    uint256 constant internal BEFORE_AGREEMENT_TERMINATED_NOOP = 1 << (32 + 4);
    uint256 constant internal AFTER_AGREEMENT_TERMINATED_NOOP = 1 << (32 + 5);

    /**************************************************************************
    / App Jail Reasons
    /**************************************************************************/

    uint256 constant internal APP_RULE_REGISTRATION_ONLY_IN_CONSTRUCTOR = 1;
    uint256 constant internal APP_RULE_NO_REGISTRATION_FOR_EOA = 2;
    uint256 constant internal APP_RULE_NO_REVERT_ON_TERMINATION_CALLBACK = 10;
    uint256 constant internal APP_RULE_NO_CRITICAL_SENDER_ACCOUNT = 11;
    uint256 constant internal APP_RULE_NO_CRITICAL_RECEIVER_ACCOUNT = 12;
    uint256 constant internal APP_RULE_CTX_IS_READONLY = 20;
    uint256 constant internal APP_RULE_CTX_IS_NOT_CLEAN = 21;
    uint256 constant internal APP_RULE_CTX_IS_MALFORMATED = 22;
    uint256 constant internal APP_RULE_COMPOSITE_APP_IS_NOT_WHITELISTED = 30;
    uint256 constant internal APP_RULE_COMPOSITE_APP_IS_JAILED = 31;
    uint256 constant internal APP_RULE_MAX_APP_LEVEL_REACHED = 40;

    // Validate configWord cleaness for future compatibility, or else may introduce undefined future behavior
    function isConfigWordClean(uint256 configWord) internal pure returns (bool) {
        return (configWord & ~(APP_LEVEL_MASK | APP_JAIL_BIT | AGREEMENT_CALLBACK_NOOP_BITMASKS)) == uint256(0);
    }
}

/**
 * @title Context definitions library
 * @author Superfluid
 */
library ContextDefinitions {

    /**************************************************************************
    / Call info
    /**************************************************************************/

    // app level
    uint256 constant internal CALL_INFO_APP_LEVEL_MASK = 0xFF;

    // call type
    uint256 constant internal CALL_INFO_CALL_TYPE_SHIFT = 32;
    uint256 constant internal CALL_INFO_CALL_TYPE_MASK = 0xF << CALL_INFO_CALL_TYPE_SHIFT;
    uint8 constant internal CALL_INFO_CALL_TYPE_AGREEMENT = 1;
    uint8 constant internal CALL_INFO_CALL_TYPE_APP_ACTION = 2;
    uint8 constant internal CALL_INFO_CALL_TYPE_APP_CALLBACK = 3;

    function decodeCallInfo(uint256 callInfo)
        internal pure
        returns (uint8 appCallbackLevel, uint8 callType)
    {
        appCallbackLevel = uint8(callInfo & CALL_INFO_APP_LEVEL_MASK);
        callType = uint8((callInfo & CALL_INFO_CALL_TYPE_MASK) >> CALL_INFO_CALL_TYPE_SHIFT);
    }

    function encodeCallInfo(uint8 appCallbackLevel, uint8 callType)
        internal pure
        returns (uint256 callInfo)
    {
        return uint256(appCallbackLevel) | (uint256(callType) << CALL_INFO_CALL_TYPE_SHIFT);
    }

}

/**
 * @title Flow Operator definitions library
  * @author Superfluid
 */
 library FlowOperatorDefinitions {
    uint8 constant internal AUTHORIZE_FLOW_OPERATOR_CREATE = uint8(1) << 0;
    uint8 constant internal AUTHORIZE_FLOW_OPERATOR_UPDATE = uint8(1) << 1;
    uint8 constant internal AUTHORIZE_FLOW_OPERATOR_DELETE = uint8(1) << 2;
    uint8 constant internal AUTHORIZE_FULL_CONTROL =
        AUTHORIZE_FLOW_OPERATOR_CREATE | AUTHORIZE_FLOW_OPERATOR_UPDATE | AUTHORIZE_FLOW_OPERATOR_DELETE;
    uint8 constant internal REVOKE_FLOW_OPERATOR_CREATE = ~(uint8(1) << 0);
    uint8 constant internal REVOKE_FLOW_OPERATOR_UPDATE = ~(uint8(1) << 1);
    uint8 constant internal REVOKE_FLOW_OPERATOR_DELETE = ~(uint8(1) << 2);

    function isPermissionsClean(uint8 permissions) internal pure returns (bool) {
        return (
            permissions & ~(AUTHORIZE_FLOW_OPERATOR_CREATE
                | AUTHORIZE_FLOW_OPERATOR_UPDATE
                | AUTHORIZE_FLOW_OPERATOR_DELETE)
            ) == uint8(0);
    }
 }

/**
 * @title Batch operation library
 * @author Superfluid
 */
library BatchOperation {
    /**
     * @dev ERC20.approve batch operation type
     *
     * Call spec:
     * ISuperToken(target).operationApprove(
     *     abi.decode(data, (address spender, uint256 amount))
     * )
     */
    uint32 constant internal OPERATION_TYPE_ERC20_APPROVE = 1;
    /**
     * @dev ERC20.transferFrom batch operation type
     *
     * Call spec:
     * ISuperToken(target).operationTransferFrom(
     *     abi.decode(data, (address sender, address recipient, uint256 amount)
     * )
     */
    uint32 constant internal OPERATION_TYPE_ERC20_TRANSFER_FROM = 2;
    /**
     * @dev ERC777.send batch operation type
     *
     * Call spec:
     * ISuperToken(target).operationSend(
     *     abi.decode(data, (address recipient, uint256 amount, bytes userData)
     * )
     */
    uint32 constant internal OPERATION_TYPE_ERC777_SEND = 3;
    /**
     * @dev SuperToken.upgrade batch operation type
     *
     * Call spec:
     * ISuperToken(target).operationUpgrade(
     *     abi.decode(data, (uint256 amount)
     * )
     */
    uint32 constant internal OPERATION_TYPE_SUPERTOKEN_UPGRADE = 1 + 100;
    /**
     * @dev SuperToken.downgrade batch operation type
     *
     * Call spec:
     * ISuperToken(target).operationDowngrade(
     *     abi.decode(data, (uint256 amount)
     * )
     */
    uint32 constant internal OPERATION_TYPE_SUPERTOKEN_DOWNGRADE = 2 + 100;
    /**
     * @dev Superfluid.callAgreement batch operation type
     *
     * Call spec:
     * callAgreement(
     *     ISuperAgreement(target)),
     *     abi.decode(data, (bytes callData, bytes userData)
     * )
     */
    uint32 constant internal OPERATION_TYPE_SUPERFLUID_CALL_AGREEMENT = 1 + 200;
    /**
     * @dev Superfluid.callAppAction batch operation type
     *
     * Call spec:
     * callAppAction(
     *     ISuperApp(target)),
     *     data
     * )
     */
    uint32 constant internal OPERATION_TYPE_SUPERFLUID_CALL_APP_ACTION = 2 + 200;
}

/**
 * @title Superfluid governance configs library
 * @author Superfluid
 */
library SuperfluidGovernanceConfigs {

    bytes32 constant internal SUPERFLUID_REWARD_ADDRESS_CONFIG_KEY =
        keccak256("org.superfluid-finance.superfluid.rewardAddress");
    bytes32 constant internal CFAV1_PPP_CONFIG_KEY =
        keccak256("org.superfluid-finance.agreements.ConstantFlowAgreement.v1.PPPConfiguration");
    bytes32 constant internal SUPERTOKEN_MINIMUM_DEPOSIT_KEY =
        keccak256("org.superfluid-finance.superfluid.superTokenMinimumDeposit");

    function getTrustedForwarderConfigKey(address forwarder) internal pure returns (bytes32) {
        return keccak256(abi.encode(
            "org.superfluid-finance.superfluid.trustedForwarder",
            forwarder));
    }

    function getAppRegistrationConfigKey(address deployer, string memory registrationKey) internal pure returns (bytes32) {
        return keccak256(abi.encode(
            "org.superfluid-finance.superfluid.appWhiteListing.registrationKey",
            deployer,
            registrationKey));
    }

    function getAppFactoryConfigKey(address factory) internal pure returns (bytes32) {
        return keccak256(abi.encode(
            "org.superfluid-finance.superfluid.appWhiteListing.factory",
            factory));
    }

    function decodePPPConfig(uint256 pppConfig) internal pure returns (uint256 liquidationPeriod, uint256 patricianPeriod) {
        liquidationPeriod = (pppConfig >> 32) & type(uint32).max;
        patricianPeriod = pppConfig & type(uint32).max;
    }
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperfluidToken } from "./ISuperfluidToken.sol";

/**
 * @title Super agreement interface
 * @author Superfluid
 */
interface ISuperAgreement {

    /**
     * @dev Get the type of the agreement class
     */
    function agreementType() external view returns (bytes32);

    /**
     * @dev Calculate the real-time balance for the account of this agreement class
     * @param account Account the state belongs to
     * @param time Time used for the calculation
     * @return dynamicBalance Dynamic balance portion of real-time balance of this agreement
     * @return deposit Account deposit amount of this agreement
     * @return owedDeposit Account owed deposit amount of this agreement
     */
    function realtimeBalanceOf(
        ISuperfluidToken token,
        address account,
        uint256 time
    )
        external
        view
        returns (
            int256 dynamicBalance,
            uint256 deposit,
            uint256 owedDeposit
        );

}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperToken } from "./ISuperToken.sol";

/**
 * @title SuperApp interface
 * @author Superfluid
 * @dev Be aware of the app being jailed, when the word permitted is used.
 */
interface ISuperApp {

    /**
     * @dev Callback before a new agreement is created.
     * @param superToken The super token used for the agreement.
     * @param agreementClass The agreement class address.
     * @param agreementId The agreementId
     * @param agreementData The agreement data (non-compressed)
     * @param ctx The context data.
     * @return cbdata A free format in memory data the app can use to pass
     *          arbitary information to the after-hook callback.
     *
     * @custom:note 
     * - It will be invoked with `staticcall`, no state changes are permitted.
     * - Only revert with a "reason" is permitted.
     */
    function beforeAgreementCreated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata ctx
    )
        external
        view
        returns (bytes memory cbdata);

    /**
     * @dev Callback after a new agreement is created.
     * @param superToken The super token used for the agreement.
     * @param agreementClass The agreement class address.
     * @param agreementId The agreementId
     * @param agreementData The agreement data (non-compressed)
     * @param cbdata The data returned from the before-hook callback.
     * @param ctx The context data.
     * @return newCtx The current context of the transaction.
     *
     * @custom:note 
     * - State changes is permitted.
     * - Only revert with a "reason" is permitted.
     */
    function afterAgreementCreated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata cbdata,
        bytes calldata ctx
    )
        external
        returns (bytes memory newCtx);

    /**
     * @dev Callback before a new agreement is updated.
     * @param superToken The super token used for the agreement.
     * @param agreementClass The agreement class address.
     * @param agreementId The agreementId
     * @param agreementData The agreement data (non-compressed)
     * @param ctx The context data.
     * @return cbdata A free format in memory data the app can use to pass
     *          arbitary information to the after-hook callback.
     *
     * @custom:note 
     * - It will be invoked with `staticcall`, no state changes are permitted.
     * - Only revert with a "reason" is permitted.
     */
    function beforeAgreementUpdated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata ctx
    )
        external
        view
        returns (bytes memory cbdata);


    /**
    * @dev Callback after a new agreement is updated.
    * @param superToken The super token used for the agreement.
    * @param agreementClass The agreement class address.
    * @param agreementId The agreementId
    * @param agreementData The agreement data (non-compressed)
    * @param cbdata The data returned from the before-hook callback.
    * @param ctx The context data.
    * @return newCtx The current context of the transaction.
    *
    * @custom:note 
    * - State changes is permitted.
    * - Only revert with a "reason" is permitted.
    */
    function afterAgreementUpdated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata cbdata,
        bytes calldata ctx
    )
        external
        returns (bytes memory newCtx);

    /**
    * @dev Callback before a new agreement is terminated.
    * @param superToken The super token used for the agreement.
    * @param agreementClass The agreement class address.
    * @param agreementId The agreementId
    * @param agreementData The agreement data (non-compressed)
    * @param ctx The context data.
    * @return cbdata A free format in memory data the app can use to pass arbitary information to the after-hook callback.
    *
    * @custom:note 
    * - It will be invoked with `staticcall`, no state changes are permitted.
    * - Revert is not permitted.
    */
    function beforeAgreementTerminated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata ctx
    )
        external
        view
        returns (bytes memory cbdata);

    /**
    * @dev Callback after a new agreement is terminated.
    * @param superToken The super token used for the agreement.
    * @param agreementClass The agreement class address.
    * @param agreementId The agreementId
    * @param agreementData The agreement data (non-compressed)
    * @param cbdata The data returned from the before-hook callback.
    * @param ctx The context data.
    * @return newCtx The current context of the transaction.
    *
    * @custom:note 
    * - State changes is permitted.
    * - Revert is not permitted.
    */
    function afterAgreementTerminated(
        ISuperToken superToken,
        address agreementClass,
        bytes32 agreementId,
        bytes calldata agreementData,
        bytes calldata cbdata,
        bytes calldata ctx
    )
        external
        returns (bytes memory newCtx);
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperfluid } from "./ISuperfluid.sol";
import { ISuperfluidToken } from "./ISuperfluidToken.sol";
import { TokenInfo } from "../tokens/TokenInfo.sol";
import { IERC777 } from "@openzeppelin/contracts/token/ERC777/IERC777.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title Super token (Superfluid Token + ERC20 + ERC777) interface
 * @author Superfluid
 */
interface ISuperToken is ISuperfluidToken, TokenInfo, IERC20, IERC777 {

    /**************************************************************************
     * Errors
     *************************************************************************/
    error SUPER_TOKEN_CALLER_IS_NOT_OPERATOR_FOR_HOLDER();       // 0xf7f02227
    error SUPER_TOKEN_NOT_ERC777_TOKENS_RECIPIENT();             // 0xfe737d05
    error SUPER_TOKEN_INFLATIONARY_DEFLATIONARY_NOT_SUPPORTED(); // 0xe3e13698
    error SUPER_TOKEN_NO_UNDERLYING_TOKEN();                     // 0xf79cf656
    error SUPER_TOKEN_ONLY_SELF();                               // 0x7ffa6648
    error SUPER_TOKEN_ONLY_HOST();                               // 0x98f73704
    error SUPER_TOKEN_APPROVE_FROM_ZERO_ADDRESS();               // 0x81638627
    error SUPER_TOKEN_APPROVE_TO_ZERO_ADDRESS();                 // 0xdf070274
    error SUPER_TOKEN_BURN_FROM_ZERO_ADDRESS();                  // 0xba2ab184
    error SUPER_TOKEN_MINT_TO_ZERO_ADDRESS();                    // 0x0d243157
    error SUPER_TOKEN_TRANSFER_FROM_ZERO_ADDRESS();              // 0xeecd6c9b
    error SUPER_TOKEN_TRANSFER_TO_ZERO_ADDRESS();                // 0xe219bd39

    /**
     * @dev Initialize the contract
     */
    function initialize(
        IERC20 underlyingToken,
        uint8 underlyingDecimals,
        string calldata n,
        string calldata s
    ) external;

    /**************************************************************************
    * TokenInfo & ERC777
    *************************************************************************/

    /**
     * @dev Returns the name of the token.
     */
    function name() external view override(IERC777, TokenInfo) returns (string memory);

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external view override(IERC777, TokenInfo) returns (string memory);

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * @custom:note SuperToken always uses 18 decimals.
     *
     * This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() external view override(TokenInfo) returns (uint8);

    /**************************************************************************
    * ERC20 & ERC777
    *************************************************************************/

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() external view override(IERC777, IERC20) returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by an account (`owner`).
     */
    function balanceOf(address account) external view override(IERC777, IERC20) returns(uint256 balance);

    /**************************************************************************
    * ERC20
    *************************************************************************/

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * @return Returns Success a boolean value indicating whether the operation succeeded.
     *
     * @custom:emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external override(IERC20) returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     *         allowed to spend on behalf of `owner` through {transferFrom}. This is
     *         zero by default.
     *
     * @notice This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external override(IERC20) view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * @return Returns Success a boolean value indicating whether the operation succeeded.
     *
     * @custom:note Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * @custom:emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external override(IERC20) returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     *         allowance mechanism. `amount` is then deducted from the caller's
     *         allowance.
     *
     * @return Returns Success a boolean value indicating whether the operation succeeded.
     *
     * @custom:emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external override(IERC20) returns (bool);

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * @custom:emits an {Approval} event indicating the updated allowance.
     *
     * @custom:requirements 
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) external returns (bool);

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * @custom:emits an {Approval} event indicating the updated allowance.
     *
     * @custom:requirements 
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
     function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool);

    /**************************************************************************
    * ERC777
    *************************************************************************/

    /**
     * @dev Returns the smallest part of the token that is not divisible. This
     *         means all token operations (creation, movement and destruction) must have
     *         amounts that are a multiple of this number.
     *
     * @custom:note For super token contracts, this value is always 1
     */
    function granularity() external view override(IERC777) returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * @dev If send or receive hooks are registered for the caller and `recipient`,
     *      the corresponding functions will be called with `data` and empty
     *      `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * @custom:emits a {Sent} event.
     *
     * @custom:requirements 
     * - the caller must have at least `amount` tokens.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function send(address recipient, uint256 amount, bytes calldata data) external override(IERC777);

    /**
     * @dev Destroys `amount` tokens from the caller's account, reducing the
     * total supply and transfers the underlying token to the caller's account.
     *
     * If a send hook is registered for the caller, the corresponding function
     * will be called with `data` and empty `operatorData`. See {IERC777Sender}.
     *
     * @custom:emits a {Burned} event.
     *
     * @custom:requirements 
     * - the caller must have at least `amount` tokens.
     */
    function burn(uint256 amount, bytes calldata data) external override(IERC777);

    /**
     * @dev Returns true if an account is an operator of `tokenHolder`.
     * Operators can send and burn tokens on behalf of their owners. All
     * accounts are their own operator.
     *
     * See {operatorSend} and {operatorBurn}.
     */
    function isOperatorFor(address operator, address tokenHolder) external override(IERC777) view returns (bool);

    /**
     * @dev Make an account an operator of the caller.
     *
     * See {isOperatorFor}.
     *
     * @custom:emits an {AuthorizedOperator} event.
     *
     * @custom:requirements 
     * - `operator` cannot be calling address.
     */
    function authorizeOperator(address operator) external override(IERC777);

    /**
     * @dev Revoke an account's operator status for the caller.
     *
     * See {isOperatorFor} and {defaultOperators}.
     *
     * @custom:emits a {RevokedOperator} event.
     *
     * @custom:requirements 
     * - `operator` cannot be calling address.
     */
    function revokeOperator(address operator) external override(IERC777);

    /**
     * @dev Returns the list of default operators. These accounts are operators
     * for all token holders, even if {authorizeOperator} was never called on
     * them.
     *
     * This list is immutable, but individual holders may revoke these via
     * {revokeOperator}, in which case {isOperatorFor} will return false.
     */
    function defaultOperators() external override(IERC777) view returns (address[] memory);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient`. The caller must
     * be an operator of `sender`.
     *
     * If send or receive hooks are registered for `sender` and `recipient`,
     * the corresponding functions will be called with `data` and
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * @custom:emits a {Sent} event.
     *
     * @custom:requirements 
     * - `sender` cannot be the zero address.
     * - `sender` must have at least `amount` tokens.
     * - the caller must be an operator for `sender`.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function operatorSend(
        address sender,
        address recipient,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external override(IERC777);

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the total supply.
     * The caller must be an operator of `account`.
     *
     * If a send hook is registered for `account`, the corresponding function
     * will be called with `data` and `operatorData`. See {IERC777Sender}.
     *
     * @custom:emits a {Burned} event.
     *
     * @custom:requirements 
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     * - the caller must be an operator for `account`.
     */
    function operatorBurn(
        address account,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external override(IERC777);

    /**************************************************************************
     * SuperToken custom token functions
     *************************************************************************/

    /**
     * @dev Mint new tokens for the account
     *
     * @custom:modifiers 
     *  - onlySelf
     */
    function selfMint(
        address account,
        uint256 amount,
        bytes memory userData
    ) external;

   /**
    * @dev Burn existing tokens for the account
    *
    * @custom:modifiers 
    *  - onlySelf
    */
   function selfBurn(
       address account,
       uint256 amount,
       bytes memory userData
   ) external;

   /**
    * @dev Transfer `amount` tokens from the `sender` to `recipient`.
    * If `spender` isn't the same as `sender`, checks if `spender` has allowance to
    * spend tokens of `sender`.
    *
    * @custom:modifiers 
    *  - onlySelf
    */
   function selfTransferFrom(
        address sender,
        address spender,
        address recipient,
        uint256 amount
   ) external;

   /**
    * @dev Give `spender`, `amount` allowance to spend the tokens of
    * `account`.
    *
    * @custom:modifiers 
    *  - onlySelf
    */
   function selfApproveFor(
        address account,
        address spender,
        uint256 amount
   ) external;

    /**************************************************************************
     * SuperToken extra functions
     *************************************************************************/

    /**
     * @dev Transfer all available balance from `msg.sender` to `recipient`
     */
    function transferAll(address recipient) external;

    /**************************************************************************
     * ERC20 wrapping
     *************************************************************************/

    /**
     * @dev Return the underlying token contract
     * @return tokenAddr Underlying token address
     */
    function getUnderlyingToken() external view returns(address tokenAddr);

    /**
     * @dev Upgrade ERC20 to SuperToken.
     * @param amount Number of tokens to be upgraded (in 18 decimals)
     *
     * @custom:note It will use `transferFrom` to get tokens. Before calling this
     * function you should `approve` this contract
     */
    function upgrade(uint256 amount) external;

    /**
     * @dev Upgrade ERC20 to SuperToken and transfer immediately
     * @param to The account to receive upgraded tokens
     * @param amount Number of tokens to be upgraded (in 18 decimals)
     * @param data User data for the TokensRecipient callback
     *
     * @custom:note It will use `transferFrom` to get tokens. Before calling this
     * function you should `approve` this contract
     * 
     * @custom:warning
     * - there is potential of reentrancy IF the "to" account is a registered ERC777 recipient.
     * @custom:requirements 
     * - if `data` is NOT empty AND `to` is a contract, it MUST be a registered ERC777 recipient otherwise it reverts.
     */
    function upgradeTo(address to, uint256 amount, bytes calldata data) external;

    /**
     * @dev Token upgrade event
     * @param account Account where tokens are upgraded to
     * @param amount Amount of tokens upgraded (in 18 decimals)
     */
    event TokenUpgraded(
        address indexed account,
        uint256 amount
    );

    /**
     * @dev Downgrade SuperToken to ERC20.
     * @dev It will call transfer to send tokens
     * @param amount Number of tokens to be downgraded
     */
    function downgrade(uint256 amount) external;

    /**
     * @dev Downgrade SuperToken to ERC20 and transfer immediately
     * @param to The account to receive downgraded tokens
     * @param amount Number of tokens to be downgraded (in 18 decimals)
     */
    function downgradeTo(address to, uint256 amount) external;

    /**
     * @dev Token downgrade event
     * @param account Account whose tokens are downgraded
     * @param amount Amount of tokens downgraded
     */
    event TokenDowngraded(
        address indexed account,
        uint256 amount
    );

    /**************************************************************************
    * Batch Operations
    *************************************************************************/

    /**
    * @dev Perform ERC20 approve by host contract.
    * @param account The account owner to be approved.
    * @param spender The spender of account owner's funds.
    * @param amount Number of tokens to be approved.
    *
    * @custom:modifiers 
    *  - onlyHost
    */
    function operationApprove(
        address account,
        address spender,
        uint256 amount
    ) external;

    /**
    * @dev Perform ERC20 transferFrom by host contract.
    * @param account The account to spend sender's funds.
    * @param spender The account where the funds is sent from.
    * @param recipient The recipient of the funds.
    * @param amount Number of tokens to be transferred.
    *
    * @custom:modifiers 
    *  - onlyHost
    */
    function operationTransferFrom(
        address account,
        address spender,
        address recipient,
        uint256 amount
    ) external;

    /**
    * @dev Perform ERC777 send by host contract.
    * @param spender The account where the funds is sent from.
    * @param recipient The recipient of the funds.
    * @param amount Number of tokens to be transferred.
    * @param data Arbitrary user inputted data
    *
    * @custom:modifiers 
    *  - onlyHost
    */
    function operationSend(
        address spender,
        address recipient,
        uint256 amount,
        bytes memory data
    ) external;

    /**
    * @dev Upgrade ERC20 to SuperToken by host contract.
    * @param account The account to be changed.
    * @param amount Number of tokens to be upgraded (in 18 decimals)
    *
    * @custom:modifiers 
    *  - onlyHost
    */
    function operationUpgrade(address account, uint256 amount) external;

    /**
    * @dev Downgrade ERC20 to SuperToken by host contract.
    * @param account The account to be changed.
    * @param amount Number of tokens to be downgraded (in 18 decimals)
    *
    * @custom:modifiers 
    *  - onlyHost
    */
    function operationDowngrade(address account, uint256 amount) external;


    /**************************************************************************
    * Function modifiers for access control and parameter validations
    *
    * While they cannot be explicitly stated in function definitions, they are
    * listed in function definition comments instead for clarity.
    *
    * NOTE: solidity-coverage not supporting it
    *************************************************************************/

    /// @dev The msg.sender must be the contract itself
    //modifier onlySelf() virtual

}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperToken } from "./ISuperToken.sol";

import {
    IERC20,
    ERC20WithTokenInfo
} from "../tokens/ERC20WithTokenInfo.sol";

/**
 * @title Super token factory interface
 * @author Superfluid
 */
interface ISuperTokenFactory {

    /**************************************************************************
     * Errors
     *************************************************************************/
    error SUPER_TOKEN_FACTORY_ALREADY_EXISTS(); // 0x91d67972
    error SUPER_TOKEN_FACTORY_DOES_NOT_EXIST(); // 0x872cac48
    error SUPER_TOKEN_FACTORY_UNINITIALIZED();  // 0x1b39b9b4
    error SUPER_TOKEN_FACTORY_ONLY_HOST();      // 0x478b8e83
    error SUPER_TOKEN_FACTORY_ZERO_ADDRESS();   // 0x305c9e82

    /**
     * @dev Get superfluid host contract address
     */
    function getHost() external view returns(address host);

    /// @dev Initialize the contract
    function initialize() external;

    /**
     * @dev Get the current super token logic used by the factory
     */
    function getSuperTokenLogic() external view returns (ISuperToken superToken);

    /**
     * @dev Upgradability modes
     */
    enum Upgradability {
        /// Non upgradable super token, `host.updateSuperTokenLogic` will revert
        NON_UPGRADABLE,
        /// Upgradable through `host.updateSuperTokenLogic` operation
        SEMI_UPGRADABLE,
        /// Always using the latest super token logic
        FULL_UPGRADABLE
    }

    /**
     * @notice Create new super token wrapper for the underlying ERC20 token
     * @param underlyingToken Underlying ERC20 token
     * @param underlyingDecimals Underlying token decimals
     * @param upgradability Upgradability mode
     * @param name Super token name
     * @param symbol Super token symbol
     * @return superToken The deployed and initialized wrapper super token
     */
    function createERC20Wrapper(
        IERC20 underlyingToken,
        uint8 underlyingDecimals,
        Upgradability upgradability,
        string calldata name,
        string calldata symbol
    )
        external
        returns (ISuperToken superToken);

    /**
     * @notice Create new super token wrapper for the underlying ERC20 token with extra token info
     * @param underlyingToken Underlying ERC20 token
     * @param upgradability Upgradability mode
     * @param name Super token name
     * @param symbol Super token symbol
     * @return superToken The deployed and initialized wrapper super token
     * NOTE:
     * - It assumes token provide the .decimals() function
     */
    function createERC20Wrapper(
        ERC20WithTokenInfo underlyingToken,
        Upgradability upgradability,
        string calldata name,
        string calldata symbol
    )
        external
        returns (ISuperToken superToken);

    /**
     * @notice Creates a wrapper super token AND sets it in the canonical list OR reverts if it already exists
     * @dev salt for create2 is the keccak256 hash of abi.encode(address(_underlyingToken))
     * @param _underlyingToken Underlying ERC20 token
     * @return ISuperToken the created supertoken
     */
    function createCanonicalERC20Wrapper(ERC20WithTokenInfo _underlyingToken)
        external
        returns (ISuperToken);

    /**
     * @notice Computes/Retrieves wrapper super token address given the underlying token address
     * @dev We return from our canonical list if it already exists, otherwise we compute it
     * @dev note that this function only computes addresses for SEMI_UPGRADABLE SuperTokens
     * @param _underlyingToken Underlying ERC20 token address
     * @return superTokenAddress Super token address
     * @return isDeployed whether the super token is deployed AND set in the canonical mapping
     */
    function computeCanonicalERC20WrapperAddress(address _underlyingToken)
        external
        view
        returns (address superTokenAddress, bool isDeployed);

    /**
     * @notice Gets the canonical ERC20 wrapper super token address given the underlying token address
     * @dev We return the address if it exists and the zero address otherwise
     * @param _underlyingTokenAddress Underlying ERC20 token address
     * @return superTokenAddress Super token address
     */
    function getCanonicalERC20Wrapper(address _underlyingTokenAddress)
        external
        view
        returns (address superTokenAddress);

    /**
     * @dev Creates a new custom super token
     * @param customSuperTokenProxy address of the custom supertoken proxy
     */
    function initializeCustomSuperToken(
        address customSuperTokenProxy
    )
        external;

    /**
      * @dev Super token logic created event
      * @param tokenLogic Token logic address
      */
    event SuperTokenLogicCreated(ISuperToken indexed tokenLogic);

    /**
      * @dev Super token created event
      * @param token Newly created super token address
      */
    event SuperTokenCreated(ISuperToken indexed token);

    /**
      * @dev Custom super token created event
      * @param token Newly created custom super token address
      */
    event CustomSuperTokenCreated(ISuperToken indexed token);

}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperfluidGovernance } from "./ISuperfluidGovernance.sol";
import { ISuperfluidToken } from "./ISuperfluidToken.sol";
import { ISuperToken } from "./ISuperToken.sol";
import { ISuperTokenFactory } from "./ISuperTokenFactory.sol";
import { ISuperAgreement } from "./ISuperAgreement.sol";
import { ISuperApp } from "./ISuperApp.sol";
import {
    BatchOperation,
    ContextDefinitions,
    FlowOperatorDefinitions,
    SuperAppDefinitions,
    SuperfluidGovernanceConfigs
} from "./Definitions.sol";
import { TokenInfo } from "../tokens/TokenInfo.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC777 } from "@openzeppelin/contracts/token/ERC777/IERC777.sol";

/**
 * @title Host interface
 * @author Superfluid
 * @notice This is the central contract of the system where super agreement, super app
 * and super token features are connected.
 *
 * The Superfluid host contract is also the entry point for the protocol users,
 * where batch call and meta transaction are provided for UX improvements.
 *
 */
interface ISuperfluid {

    /**************************************************************************
     * Errors
     *************************************************************************/
    // Superfluid Custom Errors
    error HOST_AGREEMENT_CALLBACK_IS_NOT_ACTION();              // 0xef4295f6
    error HOST_CANNOT_DOWNGRADE_TO_NON_UPGRADEABLE();           // 0x474e7641
    error HOST_CALL_AGREEMENT_WITH_CTX_FROM_WRONG_ADDRESS();    // 0x0cd0ebc2
    error HOST_CALL_APP_ACTION_WITH_CTX_FROM_WRONG_ADDRESS();   // 0x473f7bd4
    error HOST_INVALID_CONFIG_WORD();                           // 0xf4c802a4
    error HOST_MAX_256_AGREEMENTS();                            // 0x7c281a78
    error HOST_NON_UPGRADEABLE();                               // 0x14f72c9f
    error HOST_NON_ZERO_LENGTH_PLACEHOLDER_CTX();               // 0x67e9985b
    error HOST_ONLY_GOVERNANCE();                               // 0xc5d22a4e
    error HOST_UNKNOWN_BATCH_CALL_OPERATION_TYPE();             // 0xb4770115
    error HOST_AGREEMENT_ALREADY_REGISTERED();                  // 0xdc9ddba8
    error HOST_AGREEMENT_IS_NOT_REGISTERED();                   // 0x1c9e9bea
    error HOST_MUST_BE_CONTRACT();                              // 0xd4f6b30c
    error HOST_ONLY_LISTED_AGREEMENT();                         // 0x619c5359

    // App Related Custom Errors
    // uses SuperAppDefinitions' App Jail Reasons as _code
    error APP_RULE(uint256 _code);                              // 0xa85ba64f

    error HOST_INVALID_OR_EXPIRED_SUPER_APP_REGISTRATION_KEY(); // 0x19ab84d1
    error HOST_NOT_A_SUPER_APP();                               // 0x163cbe43
    error HOST_NO_APP_REGISTRATION_PERMISSIONS();               // 0x5b93ebf0
    error HOST_RECEIVER_IS_NOT_SUPER_APP();                     // 0x96aa315e
    error HOST_SENDER_IS_NOT_SUPER_APP();                       // 0xbacfdc40
    error HOST_SOURCE_APP_NEEDS_HIGHER_APP_LEVEL();             // 0x44725270
    error HOST_SUPER_APP_IS_JAILED();                           // 0x02384b64
    error HOST_SUPER_APP_ALREADY_REGISTERED();                  // 0x01b0a935
    error HOST_UNAUTHORIZED_SUPER_APP_FACTORY();                // 0x289533c5

    /**************************************************************************
     * Time
     *
     * > The Oracle: You have the sight now, Neo. You are looking at the world without time.
     * > Neo: Then why can't I see what happens to her?
     * > The Oracle: We can never see past the choices we don't understand.
     * >       - The Oracle and Neo conversing about the future of Trinity and the effects of Neo's choices
     *************************************************************************/

    function getNow() external view returns (uint256);

    /**************************************************************************
     * Governance
     *************************************************************************/

    /**
     * @dev Get the current governance address of the Superfluid host
     */
    function getGovernance() external view returns(ISuperfluidGovernance governance);

    /**
     * @dev Replace the current governance with a new one
     */
    function replaceGovernance(ISuperfluidGovernance newGov) external;
    /**
     * @dev Governance replaced event
     * @param oldGov Address of the old governance contract
     * @param newGov Address of the new governance contract
     */
    event GovernanceReplaced(ISuperfluidGovernance oldGov, ISuperfluidGovernance newGov);

    /**************************************************************************
     * Agreement Whitelisting
     *************************************************************************/

    /**
     * @dev Register a new agreement class to the system
     * @param agreementClassLogic Initial agreement class code
     *
     * @custom:modifiers 
     * - onlyGovernance
     */
    function registerAgreementClass(ISuperAgreement agreementClassLogic) external;
    /**
     * @notice Agreement class registered event
     * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
     * @param agreementType The agreement type registered
     * @param code Address of the new agreement
     */
    event AgreementClassRegistered(bytes32 agreementType, address code);

    /**
    * @dev Update code of an agreement class
    * @param agreementClassLogic New code for the agreement class
    *
    * @custom:modifiers 
    *  - onlyGovernance
    */
    function updateAgreementClass(ISuperAgreement agreementClassLogic) external;
    /**
     * @notice Agreement class updated event
     * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
     * @param agreementType The agreement type updated
     * @param code Address of the new agreement
     */
    event AgreementClassUpdated(bytes32 agreementType, address code);

    /**
    * @notice Check if the agreement type is whitelisted
    * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
    */
    function isAgreementTypeListed(bytes32 agreementType) external view returns(bool yes);

    /**
    * @dev Check if the agreement class is whitelisted
    */
    function isAgreementClassListed(ISuperAgreement agreementClass) external view returns(bool yes);

    /**
    * @notice Get agreement class
    * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
    */
    function getAgreementClass(bytes32 agreementType) external view returns(ISuperAgreement agreementClass);

    /**
    * @dev Map list of the agreement classes using a bitmap
    * @param bitmap Agreement class bitmap
    */
    function mapAgreementClasses(uint256 bitmap)
        external view
        returns (ISuperAgreement[] memory agreementClasses);

    /**
    * @notice Create a new bitmask by adding a agreement class to it
    * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
    * @param bitmap Agreement class bitmap
    */
    function addToAgreementClassesBitmap(uint256 bitmap, bytes32 agreementType)
        external view
        returns (uint256 newBitmap);

    /**
    * @notice Create a new bitmask by removing a agreement class from it
    * @dev agreementType is the keccak256 hash of: "org.superfluid-finance.agreements.<AGREEMENT_NAME>.<VERSION>"
    * @param bitmap Agreement class bitmap
    */
    function removeFromAgreementClassesBitmap(uint256 bitmap, bytes32 agreementType)
        external view
        returns (uint256 newBitmap);

    /**************************************************************************
    * Super Token Factory
    **************************************************************************/

    /**
     * @dev Get the super token factory
     * @return factory The factory
     */
    function getSuperTokenFactory() external view returns (ISuperTokenFactory factory);

    /**
     * @dev Get the super token factory logic (applicable to upgradable deployment)
     * @return logic The factory logic
     */
    function getSuperTokenFactoryLogic() external view returns (address logic);

    /**
     * @dev Update super token factory
     * @param newFactory New factory logic
     */
    function updateSuperTokenFactory(ISuperTokenFactory newFactory) external;
    /**
     * @dev SuperToken factory updated event
     * @param newFactory Address of the new factory
     */
    event SuperTokenFactoryUpdated(ISuperTokenFactory newFactory);

    /**
     * @notice Update the super token logic to the latest
     * @dev Refer to ISuperTokenFactory.Upgradability for expected behaviours
     */
    function updateSuperTokenLogic(ISuperToken token) external;
    /**
     * @dev SuperToken logic updated event
     * @param code Address of the new SuperToken logic
     */
    event SuperTokenLogicUpdated(ISuperToken indexed token, address code);

    /**************************************************************************
     * App Registry
     *************************************************************************/

    /**
     * @dev Message sender (must be a contract) declares itself as a super app.
     * @custom:deprecated you should use `registerAppWithKey` or `registerAppByFactory` instead,
     * because app registration is currently governance permissioned on mainnets.
     * @param configWord The super app manifest configuration, flags are defined in
     * `SuperAppDefinitions`
     */
    function registerApp(uint256 configWord) external;
    /**
     * @dev App registered event
     * @param app Address of jailed app
     */
    event AppRegistered(ISuperApp indexed app);

    /**
     * @dev Message sender declares itself as a super app.
     * @param configWord The super app manifest configuration, flags are defined in `SuperAppDefinitions`
     * @param registrationKey The registration key issued by the governance, needed to register on a mainnet.
     * @notice See https://github.com/superfluid-finance/protocol-monorepo/wiki/Super-App-White-listing-Guide
     * On testnets or in dev environment, a placeholder (e.g. empty string) can be used.
     * While the message sender must be the super app itself, the transaction sender (tx.origin)
     * must be the deployer account the registration key was issued for.
     */
    function registerAppWithKey(uint256 configWord, string calldata registrationKey) external;

    /**
     * @dev Message sender (must be a contract) declares app as a super app
     * @param configWord The super app manifest configuration, flags are defined in `SuperAppDefinitions`
     * @notice On mainnet deployments, only factory contracts pre-authorized by governance can use this.
     * See https://github.com/superfluid-finance/protocol-monorepo/wiki/Super-App-White-listing-Guide
     */
    function registerAppByFactory(ISuperApp app, uint256 configWord) external;

    /**
     * @dev Query if the app is registered
     * @param app Super app address
     */
    function isApp(ISuperApp app) external view returns(bool);

    /**
     * @dev Query app callbacklevel
     * @param app Super app address
     */
    function getAppCallbackLevel(ISuperApp app) external view returns(uint8 appCallbackLevel);

    /**
     * @dev Get the manifest of the super app
     * @param app Super app address
     */
    function getAppManifest(
        ISuperApp app
    )
        external view
        returns (
            bool isSuperApp,
            bool isJailed,
            uint256 noopMask
        );

    /**
     * @dev Query if the app has been jailed
     * @param app Super app address
     */
    function isAppJailed(ISuperApp app) external view returns (bool isJail);

    /**
     * @dev Whitelist the target app for app composition for the source app (msg.sender)
     * @param targetApp The target super app address
     */
    function allowCompositeApp(ISuperApp targetApp) external;

    /**
     * @dev Query if source app is allowed to call the target app as downstream app
     * @param app Super app address
     * @param targetApp The target super app address
     */
    function isCompositeAppAllowed(
        ISuperApp app,
        ISuperApp targetApp
    )
        external view
        returns (bool isAppAllowed);

    /**************************************************************************
     * Agreement Framework
     *
     * Agreements use these function to trigger super app callbacks, updates
     * app credit and charge gas fees.
     *
     * These functions can only be called by registered agreements.
     *************************************************************************/

    /**
     * @dev (For agreements) StaticCall the app before callback
     * @param  app               The super app.
     * @param  callData          The call data sending to the super app.
     * @param  isTermination     Is it a termination callback?
     * @param  ctx               Current ctx, it will be validated.
     * @return cbdata            Data returned from the callback.
     */
    function callAppBeforeCallback(
        ISuperApp app,
        bytes calldata callData,
        bool isTermination,
        bytes calldata ctx
    )
        external
        // onlyAgreement
        // assertValidCtx(ctx)
        returns(bytes memory cbdata);

    /**
     * @dev (For agreements) Call the app after callback
     * @param  app               The super app.
     * @param  callData          The call data sending to the super app.
     * @param  isTermination     Is it a termination callback?
     * @param  ctx               Current ctx, it will be validated.
     * @return newCtx            The current context of the transaction.
     */
    function callAppAfterCallback(
        ISuperApp app,
        bytes calldata callData,
        bool isTermination,
        bytes calldata ctx
    )
        external
        // onlyAgreement
        // assertValidCtx(ctx)
        returns(bytes memory newCtx);

    /**
     * @dev (For agreements) Create a new callback stack
     * @param  ctx                     The current ctx, it will be validated.
     * @param  app                     The super app.
     * @param  appCreditGranted        App credit granted so far.
     * @param  appCreditUsed           App credit used so far.
     * @return newCtx                  The current context of the transaction.
     */
    function appCallbackPush(
        bytes calldata ctx,
        ISuperApp app,
        uint256 appCreditGranted,
        int256 appCreditUsed,
        ISuperfluidToken appCreditToken
    )
        external
        // onlyAgreement
        // assertValidCtx(ctx)
        returns (bytes memory newCtx);

    /**
     * @dev (For agreements) Pop from the current app callback stack
     * @param  ctx                     The ctx that was pushed before the callback stack.
     * @param  appCreditUsedDelta      App credit used by the app.
     * @return newCtx                  The current context of the transaction.
     *
     * @custom:security
     * - Here we cannot do assertValidCtx(ctx), since we do not really save the stack in memory.
     * - Hence there is still implicit trust that the agreement handles the callback push/pop pair correctly.
     */
    function appCallbackPop(
        bytes calldata ctx,
        int256 appCreditUsedDelta
    )
        external
        // onlyAgreement
        returns (bytes memory newCtx);

    /**
     * @dev (For agreements) Use app credit.
     * @param  ctx                      The current ctx, it will be validated.
     * @param  appCreditUsedMore        See app credit for more details.
     * @return newCtx                   The current context of the transaction.
     */
    function ctxUseCredit(
        bytes calldata ctx,
        int256 appCreditUsedMore
    )
        external
        // onlyAgreement
        // assertValidCtx(ctx)
        returns (bytes memory newCtx);

    /**
     * @dev (For agreements) Jail the app.
     * @param  app                     The super app.
     * @param  reason                  Jail reason code.
     * @return newCtx                  The current context of the transaction.
     */
    function jailApp(
        bytes calldata ctx,
        ISuperApp app,
        uint256 reason
    )
        external
        // onlyAgreement
        // assertValidCtx(ctx)
        returns (bytes memory newCtx);

    /**
     * @dev Jail event for the app
     * @param app Address of jailed app
     * @param reason Reason the app is jailed (see Definitions.sol for the full list)
     */
    event Jail(ISuperApp indexed app, uint256 reason);

    /**************************************************************************
     * Contextless Call Proxies
     *
     * NOTE: For EOAs or non-app contracts, they are the entry points for interacting
     * with agreements or apps.
     *
     * NOTE: The contextual call data should be generated using
     * abi.encodeWithSelector. The context parameter should be set to "0x",
     * an empty bytes array as a placeholder to be replaced by the host
     * contract.
     *************************************************************************/

     /**
      * @dev Call agreement function
      * @param agreementClass The agreement address you are calling
      * @param callData The contextual call data with placeholder ctx
      * @param userData Extra user data being sent to the super app callbacks
      */
     function callAgreement(
         ISuperAgreement agreementClass,
         bytes calldata callData,
         bytes calldata userData
     )
        external
        //cleanCtx
        //isAgreement(agreementClass)
        returns(bytes memory returnedData);

    /**
     * @notice Call app action
     * @dev Main use case is calling app action in a batch call via the host
     * @param callData The contextual call data
     *
     * @custom:note See "Contextless Call Proxies" above for more about contextual call data.
     */
    function callAppAction(
        ISuperApp app,
        bytes calldata callData
    )
        external
        //cleanCtx
        //isAppActive(app)
        //isValidAppAction(callData)
        returns(bytes memory returnedData);

    /**************************************************************************
     * Contextual Call Proxies and Context Utilities
     *
     * For apps, they must use context they receive to interact with
     * agreements or apps.
     *
     * The context changes must be saved and returned by the apps in their
     * callbacks always, any modification to the context will be detected and
     * the violating app will be jailed.
     *************************************************************************/

    /**
     * @dev Context Struct
     *
     * @custom:note on backward compatibility:
     * - Non-dynamic fields are padded to 32bytes and packed
     * - Dynamic fields are referenced through a 32bytes offset to their "parents" field (or root)
     * - The order of the fields hence should not be rearranged in order to be backward compatible:
     *    - non-dynamic fields will be parsed at the same memory location,
     *    - and dynamic fields will simply have a greater offset than it was.
     * - We cannot change the structure of the Context struct because of ABI compatibility requirements
     */
    struct Context {
        //
        // Call context
        //
        // app callback level
        uint8 appCallbackLevel;
        // type of call
        uint8 callType;
        // the system timestamp
        uint256 timestamp;
        // The intended message sender for the call
        address msgSender;

        //
        // Callback context
        //
        // For callbacks it is used to know which agreement function selector is called
        bytes4 agreementSelector;
        // User provided data for app callbacks
        bytes userData;

        //
        // App context
        //
        // app credit granted
        uint256 appCreditGranted;
        // app credit wanted by the app callback
        uint256 appCreditWantedDeprecated;
        // app credit used, allowing negative values over a callback session
        // the appCreditUsed value over a callback sessions is calculated with:
        // existing flow data owed deposit + sum of the callback agreements
        // deposit deltas 
        // the final value used to modify the state is determined by the
        // _adjustNewAppCreditUsed function (in AgreementLibrary.sol) which takes 
        // the appCreditUsed value reached in the callback session and the app
        // credit granted
        int256 appCreditUsed;
        // app address
        address appAddress;
        // app credit in super token
        ISuperfluidToken appCreditToken;
    }

    function callAgreementWithContext(
        ISuperAgreement agreementClass,
        bytes calldata callData,
        bytes calldata userData,
        bytes calldata ctx
    )
        external
        // requireValidCtx(ctx)
        // onlyAgreement(agreementClass)
        returns (bytes memory newCtx, bytes memory returnedData);

    function callAppActionWithContext(
        ISuperApp app,
        bytes calldata callData,
        bytes calldata ctx
    )
        external
        // requireValidCtx(ctx)
        // isAppActive(app)
        returns (bytes memory newCtx);

    function decodeCtx(bytes memory ctx)
        external pure
        returns (Context memory context);

    function isCtxValid(bytes calldata ctx) external view returns (bool);

    /**************************************************************************
    * Batch call
    **************************************************************************/
    /**
     * @dev Batch operation data
     */
    struct Operation {
        // Operation type. Defined in BatchOperation (Definitions.sol)
        uint32 operationType;
        // Operation target
        address target;
        // Data specific to the operation
        bytes data;
    }

    /**
     * @dev Batch call function
     * @param operations Array of batch operations
     */
    function batchCall(Operation[] calldata operations) external;

    /**
     * @dev Batch call function for trusted forwarders (EIP-2771)
     * @param operations Array of batch operations
     */
    function forwardBatchCall(Operation[] calldata operations) external;

    /**************************************************************************
     * Function modifiers for access control and parameter validations
     *
     * While they cannot be explicitly stated in function definitions, they are
     * listed in function definition comments instead for clarity.
     *
     * TODO: turning these off because solidity-coverage doesn't like it
     *************************************************************************/

     /* /// @dev The current superfluid context is clean.
     modifier cleanCtx() virtual;

     /// @dev Require the ctx being valid.
     modifier requireValidCtx(bytes memory ctx) virtual;

     /// @dev Assert the ctx being valid.
     modifier assertValidCtx(bytes memory ctx) virtual;

     /// @dev The agreement is a listed agreement.
     modifier isAgreement(ISuperAgreement agreementClass) virtual;

     // onlyGovernance

     /// @dev The msg.sender must be a listed agreement.
     modifier onlyAgreement() virtual;

     /// @dev The app is registered and not jailed.
     modifier isAppActive(ISuperApp app) virtual; */
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperAgreement } from "./ISuperAgreement.sol";
import { ISuperToken } from "./ISuperToken.sol";
import { ISuperfluidToken  } from "./ISuperfluidToken.sol";
import { ISuperfluid } from "./ISuperfluid.sol";


/**
 * @title Superfluid governance interface
 * @author Superfluid
 */
interface ISuperfluidGovernance {
    
    /**************************************************************************
     * Errors
     *************************************************************************/
    error SF_GOV_ARRAYS_NOT_SAME_LENGTH();                  // 0x27743aa6
    error SF_GOV_INVALID_LIQUIDATION_OR_PATRICIAN_PERIOD(); // 0xe171980a
    error SF_GOV_MUST_BE_CONTRACT();                        // 0x80dddd73

    /**
     * @dev Replace the current governance with a new governance
     */
    function replaceGovernance(
        ISuperfluid host,
        address newGov) external;

    /**
     * @dev Register a new agreement class
     */
    function registerAgreementClass(
        ISuperfluid host,
        address agreementClass) external;

    /**
     * @dev Update logics of the contracts
     *
     * @custom:note 
     * - Because they might have inter-dependencies, it is good to have one single function to update them all
     */
    function updateContracts(
        ISuperfluid host,
        address hostNewLogic,
        address[] calldata agreementClassNewLogics,
        address superTokenFactoryNewLogic
    ) external;

    /**
     * @dev Update supertoken logic contract to the latest that is managed by the super token factory
     */
    function batchUpdateSuperTokenLogic(
        ISuperfluid host,
        ISuperToken[] calldata tokens) external;
    
    /**
     * @dev Set configuration as address value
     */
    function setConfig(
        ISuperfluid host,
        ISuperfluidToken superToken,
        bytes32 key,
        address value
    ) external;
    
    /**
     * @dev Set configuration as uint256 value
     */
    function setConfig(
        ISuperfluid host,
        ISuperfluidToken superToken,
        bytes32 key,
        uint256 value
    ) external;

    /**
     * @dev Clear configuration
     */
    function clearConfig(
        ISuperfluid host,
        ISuperfluidToken superToken,
        bytes32 key
    ) external;

    /**
     * @dev Get configuration as address value
     */
    function getConfigAsAddress(
        ISuperfluid host,
        ISuperfluidToken superToken,
        bytes32 key) external view returns (address value);

    /**
     * @dev Get configuration as uint256 value
     */
    function getConfigAsUint256(
        ISuperfluid host,
        ISuperfluidToken superToken,
        bytes32 key) external view returns (uint256 value);

}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { ISuperAgreement } from "./ISuperAgreement.sol";

/**
 * @title Superfluid token interface
 * @author Superfluid
 */
interface ISuperfluidToken {

    /**************************************************************************
     * Errors
     *************************************************************************/
    error SF_TOKEN_AGREEMENT_ALREADY_EXISTS();  // 0xf05521f6
    error SF_TOKEN_AGREEMENT_DOES_NOT_EXIST();  // 0xdae18809
    error SF_TOKEN_BURN_INSUFFICIENT_BALANCE(); // 0x10ecdf44
    error SF_TOKEN_MOVE_INSUFFICIENT_BALANCE(); // 0x2f4cb941
    error SF_TOKEN_ONLY_LISTED_AGREEMENT();     // 0xc9ff6644
    error SF_TOKEN_ONLY_HOST();                 // 0xc51efddd

    /**************************************************************************
     * Basic information
     *************************************************************************/

    /**
     * @dev Get superfluid host contract address
     */
    function getHost() external view returns(address host);

    /**
     * @dev Encoded liquidation type data mainly used for handling stack to deep errors
     *
     * @custom:note 
     * - version: 1
     * - liquidationType key:
     *    - 0 = reward account receives reward (PIC period)
     *    - 1 = liquidator account receives reward (Pleb period)
     *    - 2 = liquidator account receives reward (Pirate period/bailout)
     */
    struct LiquidationTypeData {
        uint256 version;
        uint8 liquidationType;
    }

    /**************************************************************************
     * Real-time balance functions
     *************************************************************************/

    /**
    * @dev Calculate the real balance of a user, taking in consideration all agreements of the account
    * @param account for the query
    * @param timestamp Time of balance
    * @return availableBalance Real-time balance
    * @return deposit Account deposit
    * @return owedDeposit Account owed Deposit
    */
    function realtimeBalanceOf(
       address account,
       uint256 timestamp
    )
        external view
        returns (
            int256 availableBalance,
            uint256 deposit,
            uint256 owedDeposit);

    /**
     * @notice Calculate the realtime balance given the current host.getNow() value
     * @dev realtimeBalanceOf with timestamp equals to block timestamp
     * @param account for the query
     * @return availableBalance Real-time balance
     * @return deposit Account deposit
     * @return owedDeposit Account owed Deposit
     */
    function realtimeBalanceOfNow(
       address account
    )
        external view
        returns (
            int256 availableBalance,
            uint256 deposit,
            uint256 owedDeposit,
            uint256 timestamp);

    /**
    * @notice Check if account is critical
    * @dev A critical account is when availableBalance < 0
    * @param account The account to check
    * @param timestamp The time we'd like to check if the account is critical (should use future)
    * @return isCritical Whether the account is critical
    */
    function isAccountCritical(
        address account,
        uint256 timestamp
    )
        external view
        returns(bool isCritical);

    /**
    * @notice Check if account is critical now (current host.getNow())
    * @dev A critical account is when availableBalance < 0
    * @param account The account to check
    * @return isCritical Whether the account is critical
    */
    function isAccountCriticalNow(
        address account
    )
        external view
        returns(bool isCritical);

    /**
     * @notice Check if account is solvent
     * @dev An account is insolvent when the sum of deposits for a token can't cover the negative availableBalance
     * @param account The account to check
     * @param timestamp The time we'd like to check if the account is solvent (should use future)
     * @return isSolvent True if the account is solvent, false otherwise
     */
    function isAccountSolvent(
        address account,
        uint256 timestamp
    )
        external view
        returns(bool isSolvent);

    /**
     * @notice Check if account is solvent now
     * @dev An account is insolvent when the sum of deposits for a token can't cover the negative availableBalance
     * @param account The account to check
     * @return isSolvent True if the account is solvent, false otherwise
     */
    function isAccountSolventNow(
        address account
    )
        external view
        returns(bool isSolvent);

    /**
    * @notice Get a list of agreements that is active for the account
    * @dev An active agreement is one that has state for the account
    * @param account Account to query
    * @return activeAgreements List of accounts that have non-zero states for the account
    */
    function getAccountActiveAgreements(address account)
       external view
       returns(ISuperAgreement[] memory activeAgreements);


   /**************************************************************************
    * Super Agreement hosting functions
    *************************************************************************/

    /**
     * @dev Create a new agreement
     * @param id Agreement ID
     * @param data Agreement data
     */
    function createAgreement(
        bytes32 id,
        bytes32[] calldata data
    )
        external;
    /**
     * @dev Agreement created event
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @param data Agreement data
     */
    event AgreementCreated(
        address indexed agreementClass,
        bytes32 id,
        bytes32[] data
    );

    /**
     * @dev Get data of the agreement
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @return data Data of the agreement
     */
    function getAgreementData(
        address agreementClass,
        bytes32 id,
        uint dataLength
    )
        external view
        returns(bytes32[] memory data);

    /**
     * @dev Create a new agreement
     * @param id Agreement ID
     * @param data Agreement data
     */
    function updateAgreementData(
        bytes32 id,
        bytes32[] calldata data
    )
        external;
    /**
     * @dev Agreement updated event
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @param data Agreement data
     */
    event AgreementUpdated(
        address indexed agreementClass,
        bytes32 id,
        bytes32[] data
    );

    /**
     * @dev Close the agreement
     * @param id Agreement ID
     */
    function terminateAgreement(
        bytes32 id,
        uint dataLength
    )
        external;
    /**
     * @dev Agreement terminated event
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     */
    event AgreementTerminated(
        address indexed agreementClass,
        bytes32 id
    );

    /**
     * @dev Update agreement state slot
     * @param account Account to be updated
     *
     * @custom:note 
     * - To clear the storage out, provide zero-ed array of intended length
     */
    function updateAgreementStateSlot(
        address account,
        uint256 slotId,
        bytes32[] calldata slotData
    )
        external;
    /**
     * @dev Agreement account state updated event
     * @param agreementClass Contract address of the agreement
     * @param account Account updated
     * @param slotId slot id of the agreement state
     */
    event AgreementStateUpdated(
        address indexed agreementClass,
        address indexed account,
        uint256 slotId
    );

    /**
     * @dev Get data of the slot of the state of an agreement
     * @param agreementClass Contract address of the agreement
     * @param account Account to query
     * @param slotId slot id of the state
     * @param dataLength length of the state data
     */
    function getAgreementStateSlot(
        address agreementClass,
        address account,
        uint256 slotId,
        uint dataLength
    )
        external view
        returns (bytes32[] memory slotData);

    /**
     * @notice Settle balance from an account by the agreement
     * @dev The agreement needs to make sure that the balance delta is balanced afterwards
     * @param account Account to query.
     * @param delta Amount of balance delta to be settled
     *
     * @custom:modifiers 
     *  - onlyAgreement
     */
    function settleBalance(
        address account,
        int256 delta
    )
        external;

    /**
     * @dev Make liquidation payouts (v2)
     * @param id Agreement ID
     * @param liquidationTypeData Data regarding the version of the liquidation schema and the type
     * @param liquidatorAccount Address of the executor of the liquidation
     * @param useDefaultRewardAccount Whether or not the default reward account receives the rewardAmount
     * @param targetAccount Account to be liquidated
     * @param rewardAmount The amount the rewarded account will receive
     * @param targetAccountBalanceDelta The delta amount the target account balance should change by
     *
     * @custom:note 
     * - If a bailout is required (bailoutAmount > 0)
     *   - the actual reward (single deposit) goes to the executor,
     *   - while the reward account becomes the bailout account
     *   - total bailout include: bailout amount + reward amount
     *   - the targetAccount will be bailed out
     * - If a bailout is not required
     *   - the targetAccount will pay the rewardAmount
     *   - the liquidator (reward account in PIC period) will receive the rewardAmount
     *
     * @custom:modifiers 
     *  - onlyAgreement
     */
    function makeLiquidationPayoutsV2
    (
        bytes32 id,
        bytes memory liquidationTypeData,
        address liquidatorAccount,
        bool useDefaultRewardAccount,
        address targetAccount,
        uint256 rewardAmount,
        int256 targetAccountBalanceDelta
    ) external;
    /**
     * @dev Agreement liquidation event v2 (including agent account)
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @param liquidatorAccount Address of the executor of the liquidation
     * @param targetAccount Account of the stream sender
     * @param rewardAmountReceiver Account that collects the reward or bails out insolvent accounts
     * @param rewardAmount The amount the reward recipient account balance should change by
     * @param targetAccountBalanceDelta The amount the sender account balance should change by
     * @param liquidationTypeData The encoded liquidation type data including the version (how to decode)
     *
     * @custom:note 
     * Reward account rule:
     * - if the agreement is liquidated during the PIC period
     *   - the rewardAmountReceiver will get the rewardAmount (remaining deposit), regardless of the liquidatorAccount
     *   - the targetAccount will pay for the rewardAmount
     * - if the agreement is liquidated after the PIC period AND the targetAccount is solvent
     *   - the rewardAmountReceiver will get the rewardAmount (remaining deposit)
     *   - the targetAccount will pay for the rewardAmount
     * - if the targetAccount is insolvent
     *   - the liquidatorAccount will get the rewardAmount (single deposit)
     *   - the default reward account (governance) will pay for both the rewardAmount and bailoutAmount
     *   - the targetAccount will receive the bailoutAmount
     */
    event AgreementLiquidatedV2(
        address indexed agreementClass,
        bytes32 id,
        address indexed liquidatorAccount,
        address indexed targetAccount,
        address rewardAmountReceiver,
        uint256 rewardAmount,
        int256 targetAccountBalanceDelta,
        bytes liquidationTypeData
    );

    /**************************************************************************
     * Function modifiers for access control and parameter validations
     *
     * While they cannot be explicitly stated in function definitions, they are
     * listed in function definition comments instead for clarity.
     *
     * NOTE: solidity-coverage not supporting it
     *************************************************************************/

     /// @dev The msg.sender must be host contract
     //modifier onlyHost() virtual;

    /// @dev The msg.sender must be a listed agreement.
    //modifier onlyAgreement() virtual;

    /**************************************************************************
     * DEPRECATED
     *************************************************************************/

    /**
     * @dev Agreement liquidation event (DEPRECATED BY AgreementLiquidatedBy)
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @param penaltyAccount Account of the agreement to be penalized
     * @param rewardAccount Account that collect the reward
     * @param rewardAmount Amount of liquidation reward
     *
     * @custom:deprecated Use AgreementLiquidatedV2 instead
     */
    event AgreementLiquidated(
        address indexed agreementClass,
        bytes32 id,
        address indexed penaltyAccount,
        address indexed rewardAccount,
        uint256 rewardAmount
    );

    /**
     * @dev System bailout occurred (DEPRECATED BY AgreementLiquidatedBy)
     * @param bailoutAccount Account that bailout the penalty account
     * @param bailoutAmount Amount of account bailout
     *
     * @custom:deprecated Use AgreementLiquidatedV2 instead
     */
    event Bailout(
        address indexed bailoutAccount,
        uint256 bailoutAmount
    );

    /**
     * @dev Agreement liquidation event (DEPRECATED BY AgreementLiquidatedV2)
     * @param liquidatorAccount Account of the agent that performed the liquidation.
     * @param agreementClass Contract address of the agreement
     * @param id Agreement ID
     * @param penaltyAccount Account of the agreement to be penalized
     * @param bondAccount Account that collect the reward or bailout accounts
     * @param rewardAmount Amount of liquidation reward
     * @param bailoutAmount Amount of liquidation bailouot
     *
     * @custom:deprecated Use AgreementLiquidatedV2 instead
     *
     * @custom:note 
     * Reward account rule:
     * - if bailout is equal to 0, then
     *   - the bondAccount will get the rewardAmount,
     *   - the penaltyAccount will pay for the rewardAmount.
     * - if bailout is larger than 0, then
     *   - the liquidatorAccount will get the rewardAmouont,
     *   - the bondAccount will pay for both the rewardAmount and bailoutAmount,
     *   - the penaltyAccount will pay for the rewardAmount while get the bailoutAmount.
     */
    event AgreementLiquidatedBy(
        address liquidatorAccount,
        address indexed agreementClass,
        bytes32 id,
        address indexed penaltyAccount,
        address indexed bondAccount,
        uint256 rewardAmount,
        uint256 bailoutAmount
    );
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { TokenInfo } from "./TokenInfo.sol";

/**
 * @title ERC20 token with token info interface
 * @author Superfluid
 * @dev Using abstract contract instead of interfaces because old solidity
 *      does not support interface inheriting other interfaces
 * solhint-disable-next-line no-empty-blocks
 *
 */
// solhint-disable-next-line no-empty-blocks
abstract contract ERC20WithTokenInfo is IERC20, TokenInfo {}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity >= 0.8.4;

/**
 * @title ERC20 token info interface
 * @author Superfluid
 * @dev ERC20 standard interface does not specify these functions, but
 *      often the token implementations have them.
 */
interface TokenInfo {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() external view returns (uint8);
}
          

// SPDX-License-Identifier: AGPLv3
pragma solidity 0.8.16;

/**
 * @title Call utilities library that is absent from the OpenZeppelin
 * @author Superfluid
 */
library CallUtils {

    /// @dev Bubble up the revert from the returnedData (supports Panic, Error & Custom Errors)
    /// @notice This is needed in order to provide some human-readable revert message from a call
    /// @param returnedData Response of the call
    function revertFromReturnedData(bytes memory returnedData) internal pure {
        if (returnedData.length < 4) {
            // case 1: catch all
            revert("CallUtils: target revert()");
        } else {
            bytes4 errorSelector;
            assembly {
                errorSelector := mload(add(returnedData, 0x20))
            }
            if (errorSelector == bytes4(0x4e487b71) /* `seth sig "Panic(uint256)"` */) {
                // case 2: Panic(uint256) (Defined since 0.8.0)
                // solhint-disable-next-line max-line-length
                // ref: https://docs.soliditylang.org/en/v0.8.0/control-structures.html#panic-via-assert-and-error-via-require)
                string memory reason = "CallUtils: target panicked: 0x__";
                uint errorCode;
                assembly {
                    errorCode := mload(add(returnedData, 0x24))
                    let reasonWord := mload(add(reason, 0x20))
                    // [0..9] is converted to ['0'..'9']
                    // [0xa..0xf] is not correctly converted to ['a'..'f']
                    // but since panic code doesn't have those cases, we will ignore them for now!
                    let e1 := add(and(errorCode, 0xf), 0x30)
                    let e2 := shl(8, add(shr(4, and(errorCode, 0xf0)), 0x30))
                    reasonWord := or(
                        and(reasonWord, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff0000),
                        or(e2, e1))
                    mstore(add(reason, 0x20), reasonWord)
                }
                revert(reason);
            } else {
                // case 3: Error(string) (Defined at least since 0.7.0)
                // case 4: Custom errors (Defined since 0.8.0)
                uint len = returnedData.length;
                assembly {
                    revert(add(returnedData, 32), len)
                }
            }
        }
    }

    /**
    * @dev Helper method to parse data and extract the method signature (selector).
    *
    * Copied from: https://github.com/argentlabs/argent-contracts/
    * blob/master/contracts/modules/common/Utils.sol#L54-L60
    */
    function parseSelector(bytes memory callData) internal pure returns (bytes4 selector) {
        require(callData.length >= 4, "CallUtils: invalid callData");
        // solhint-disable-next-line no-inline-assembly
        assembly {
            selector := mload(add(callData, 0x20))
        }
    }

    /**
     * @dev Pad length to 32 bytes word boundary
     */
    function padLength32(uint256 len) internal pure returns (uint256 paddedLen) {
        return ((len / 32) +  (((len & 31) > 0) /* rounding? */ ? 1 : 0)) * 32;
    }

    /**
     * @dev Validate if the data is encoded correctly with abi.encode(bytesData)
     *
     * Expected ABI Encode Layout:
     * | word 1      | word 2           | word 3           | the rest...
     * | data length | bytesData offset | bytesData length | bytesData + padLength32 zeros |
     */
    function isValidAbiEncodedBytes(bytes memory data) internal pure returns (bool) {
        if (data.length < 64) return false;
        uint bytesOffset;
        uint bytesLen;
        // bytes offset is always expected to be 32
        assembly { bytesOffset := mload(add(data, 32)) }
        if (bytesOffset != 32) return false;
        assembly { bytesLen := mload(add(data, 64)) }
        // the data length should be bytesData.length + 64 + padded bytes length
        return data.length == 64 + padLength32(bytesLen);
    }

}