Address Details
contract
0x3e2cc57f83093Ce1Ee03482c1590E3B5f4225bd7
- Contract Name
- MedianDeltaBreaker
- Creator
- 0x56fd3f–9b8d81 at 0x1b733f–3dd6c7
- Balance
- 0 CELO ( )
- Locked CELO Balance
- 0.00 CELO
- Voting CELO Balance
- 0.00 CELO
- Pending Unlocked Gold
- 0.00 CELO
- Tokens
-
Fetching tokens...
- Transactions
- 1 Transactions
- Transfers
- 0 Transfers
- Gas Used
- 28,625
- Last Balance Update
- 16357842
This contract has been verified via Sourcify.
View contract in Sourcify repository
- Contract name:
- MedianDeltaBreaker
- Optimization enabled
- true
- Compiler version
- v0.5.17+commit.d19bba13
- Optimization runs
- 10000
- EVM Version
- istanbul
- Verified at
- 2023-04-09T19:13:06.478434Z
lib/mento-core/contracts/MedianDeltaBreaker.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import { IBreaker } from "./interfaces/IBreaker.sol"; import { WithCooldown } from "./common/breakers/WithCooldown.sol"; import { WithThreshold } from "./common/breakers/WithThreshold.sol"; import { ISortedOracles } from "./interfaces/ISortedOracles.sol"; import { Ownable } from "openzeppelin-solidity/contracts/ownership/Ownable.sol"; import { SafeMath } from "openzeppelin-solidity/contracts/math/SafeMath.sol"; import { FixidityLib } from "./common/FixidityLib.sol"; /** * @title Median Delta Breaker * @notice Breaker contract that will trigger when an updated oracle median rate changes * more than a configured relative threshold from the previous one. If this * breaker is triggered for a rate feed it should be set to no trading mode. */ contract MedianDeltaBreaker is IBreaker, WithCooldown, WithThreshold, Ownable { using SafeMath for uint256; using FixidityLib for FixidityLib.Fraction; /* ==================== State Variables ==================== */ // Address of the Mento SortedOracles contract ISortedOracles public sortedOracles; // The previous median recorded for a ratefeed. mapping(address => uint256) public previousMedianRates; /* ==================== Constructor ==================== */ constructor( uint256 _defaultCooldownTime, uint256 _defaultRateChangeThreshold, ISortedOracles _sortedOracles, address[] memory rateFeedIDs, uint256[] memory rateChangeThresholds, uint256[] memory cooldownTimes ) public { _transferOwnership(msg.sender); setSortedOracles(_sortedOracles); _setDefaultCooldownTime(_defaultCooldownTime); _setDefaultRateChangeThreshold(_defaultRateChangeThreshold); _setRateChangeThresholds(rateFeedIDs, rateChangeThresholds); _setCooldownTimes(rateFeedIDs, cooldownTimes); } /* ==================== Restricted Functions ==================== */ /** * @notice Sets the cooldown time to the specified value for a rate feed. * @param rateFeedIDs the targeted rate feed. * @param cooldownTimes The new cooldownTime value. * @dev Should be set to 0 to force a manual reset. */ function setCooldownTime(address[] calldata rateFeedIDs, uint256[] calldata cooldownTimes) external onlyOwner { _setCooldownTimes(rateFeedIDs, cooldownTimes); } /** * @notice Sets the cooldownTime to the specified value for a rate feed. * @param cooldownTime The new cooldownTime value. * @dev Should be set to 0 to force a manual reset. */ function setDefaultCooldownTime(uint256 cooldownTime) external onlyOwner { _setDefaultCooldownTime(cooldownTime); } /** * @notice Sets rateChangeThreshold. * @param _defaultRateChangeThreshold The new rateChangeThreshold value. */ function setDefaultRateChangeThreshold(uint256 _defaultRateChangeThreshold) external onlyOwner { _setDefaultRateChangeThreshold(_defaultRateChangeThreshold); } /** * @notice Configures rate feed to rate threshold pairs. * @param rateFeedIDs Collection of the addresses rate feeds. * @param rateChangeThresholds Collection of the rate thresholds. */ function setRateChangeThresholds(address[] calldata rateFeedIDs, uint256[] calldata rateChangeThresholds) external onlyOwner { _setRateChangeThresholds(rateFeedIDs, rateChangeThresholds); } /** * @notice Sets the address of the sortedOracles contract. * @param _sortedOracles The new address of the sorted oracles contract. */ function setSortedOracles(ISortedOracles _sortedOracles) public onlyOwner { require(address(_sortedOracles) != address(0), "SortedOracles address must be set"); sortedOracles = _sortedOracles; emit SortedOraclesUpdated(address(_sortedOracles)); } /* ==================== View Functions ==================== */ /** * @notice Check if the current median report rate for a rate feed change, relative * to the last median report, is greater than the configured threshold. * If the change is greater than the threshold the breaker will trip. * @param rateFeedID The rate feed to be checked. * @return triggerBreaker A bool indicating whether or not this breaker * should be tripped for the rate feed. */ function shouldTrigger(address rateFeedID) public returns (bool triggerBreaker) { (uint256 currentMedian, ) = sortedOracles.medianRate(rateFeedID); uint256 previousMedian = previousMedianRates[rateFeedID]; previousMedianRates[rateFeedID] = currentMedian; if (previousMedian == 0) { // Previous median will be 0 the first time rate is checked. return false; } return exceedsThreshold(previousMedian, currentMedian, rateFeedID); } /** * @notice Checks whether or not the conditions have been met * for the specifed rate feed to be reset. * @return resetBreaker A bool indicating whether or not * this breaker can be reset for the given rate feed. */ function shouldReset(address rateFeedID) external returns (bool resetBreaker) { return !shouldTrigger(rateFeedID); } }
/lib/mento-core/contracts/common/FixidityLib.sol
pragma solidity ^0.5.13; /** * @title FixidityLib * @author Gadi Guy, Alberto Cuesta Canada * @notice This library provides fixed point arithmetic with protection against * overflow. * All operations are done with uint256 and the operands must have been created * with any of the newFrom* functions, which shift the comma digits() to the * right and check for limits, or with wrap() which expects a number already * in the internal representation of a fraction. * When using this library be sure to use maxNewFixed() as the upper limit for * creation of fixed point numbers. * @dev All contained functions are pure and thus marked internal to be inlined * on consuming contracts at compile time for gas efficiency. */ library FixidityLib { struct Fraction { uint256 value; } /** * @notice Number of positions that the comma is shifted to the right. */ function digits() internal pure returns (uint8) { return 24; } uint256 private constant FIXED1_UINT = 1000000000000000000000000; /** * @notice This is 1 in the fixed point units used in this library. * @dev Test fixed1() equals 10^digits() * Hardcoded to 24 digits. */ function fixed1() internal pure returns (Fraction memory) { return Fraction(FIXED1_UINT); } /** * @notice Wrap a uint256 that represents a 24-decimal fraction in a Fraction * struct. * @param x Number that already represents a 24-decimal fraction. * @return A Fraction struct with contents x. */ function wrap(uint256 x) internal pure returns (Fraction memory) { return Fraction(x); } /** * @notice Unwraps the uint256 inside of a Fraction struct. */ function unwrap(Fraction memory x) internal pure returns (uint256) { return x.value; } /** * @notice The amount of decimals lost on each multiplication operand. * @dev Test mulPrecision() equals sqrt(fixed1) */ function mulPrecision() internal pure returns (uint256) { return 1000000000000; } /** * @notice Maximum value that can be converted to fixed point. Optimize for deployment. * @dev * Test maxNewFixed() equals maxUint256() / fixed1() */ function maxNewFixed() internal pure returns (uint256) { return 115792089237316195423570985008687907853269984665640564; } /** * @notice Converts a uint256 to fixed point Fraction * @dev Test newFixed(0) returns 0 * Test newFixed(1) returns fixed1() * Test newFixed(maxNewFixed()) returns maxNewFixed() * fixed1() * Test newFixed(maxNewFixed()+1) fails */ function newFixed(uint256 x) internal pure returns (Fraction memory) { require(x <= maxNewFixed(), "can't create fixidity number larger than maxNewFixed()"); return Fraction(x * FIXED1_UINT); } /** * @notice Converts a uint256 in the fixed point representation of this * library to a non decimal. All decimal digits will be truncated. */ function fromFixed(Fraction memory x) internal pure returns (uint256) { return x.value / FIXED1_UINT; } /** * @notice Converts two uint256 representing a fraction to fixed point units, * equivalent to multiplying dividend and divisor by 10^digits(). * @param numerator numerator must be <= maxNewFixed() * @param denominator denominator must be <= maxNewFixed() and denominator can't be 0 * @dev * Test newFixedFraction(1,0) fails * Test newFixedFraction(0,1) returns 0 * Test newFixedFraction(1,1) returns fixed1() * Test newFixedFraction(1,fixed1()) returns 1 */ function newFixedFraction(uint256 numerator, uint256 denominator) internal pure returns (Fraction memory) { Fraction memory convertedNumerator = newFixed(numerator); Fraction memory convertedDenominator = newFixed(denominator); return divide(convertedNumerator, convertedDenominator); } /** * @notice Returns the integer part of a fixed point number. * @dev * Test integer(0) returns 0 * Test integer(fixed1()) returns fixed1() * Test integer(newFixed(maxNewFixed())) returns maxNewFixed()*fixed1() */ function integer(Fraction memory x) internal pure returns (Fraction memory) { return Fraction((x.value / FIXED1_UINT) * FIXED1_UINT); // Can't overflow } /** * @notice Returns the fractional part of a fixed point number. * In the case of a negative number the fractional is also negative. * @dev * Test fractional(0) returns 0 * Test fractional(fixed1()) returns 0 * Test fractional(fixed1()-1) returns 10^24-1 */ function fractional(Fraction memory x) internal pure returns (Fraction memory) { return Fraction(x.value - (x.value / FIXED1_UINT) * FIXED1_UINT); // Can't overflow } /** * @notice x+y. * @dev The maximum value that can be safely used as an addition operator is defined as * maxFixedAdd = maxUint256()-1 / 2, or * 57896044618658097711785492504343953926634992332820282019728792003956564819967. * Test add(maxFixedAdd,maxFixedAdd) equals maxFixedAdd + maxFixedAdd * Test add(maxFixedAdd+1,maxFixedAdd+1) throws */ function add(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) { uint256 z = x.value + y.value; require(z >= x.value, "add overflow detected"); return Fraction(z); } /** * @notice x-y. * @dev * Test subtract(6, 10) fails */ function subtract(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) { require(x.value >= y.value, "substraction underflow detected"); return Fraction(x.value - y.value); } /** * @notice x*y. If any of the operators is higher than the max multiplier value it * might overflow. * @dev The maximum value that can be safely used as a multiplication operator * (maxFixedMul) is calculated as sqrt(maxUint256()*fixed1()), * or 340282366920938463463374607431768211455999999999999 * Test multiply(0,0) returns 0 * Test multiply(maxFixedMul,0) returns 0 * Test multiply(0,maxFixedMul) returns 0 * Test multiply(fixed1()/mulPrecision(),fixed1()*mulPrecision()) returns fixed1() * Test multiply(maxFixedMul,maxFixedMul) is around maxUint256() * Test multiply(maxFixedMul+1,maxFixedMul+1) fails */ // solhint-disable-next-line code-complexity function multiply(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) { if (x.value == 0 || y.value == 0) return Fraction(0); if (y.value == FIXED1_UINT) return x; if (x.value == FIXED1_UINT) return y; // Separate into integer and fractional parts // x = x1 + x2, y = y1 + y2 uint256 x1 = integer(x).value / FIXED1_UINT; uint256 x2 = fractional(x).value; uint256 y1 = integer(y).value / FIXED1_UINT; uint256 y2 = fractional(y).value; // (x1 + x2) * (y1 + y2) = (x1 * y1) + (x1 * y2) + (x2 * y1) + (x2 * y2) uint256 x1y1 = x1 * y1; if (x1 != 0) require(x1y1 / x1 == y1, "overflow x1y1 detected"); // x1y1 needs to be multiplied back by fixed1 // solhint-disable-next-line var-name-mixedcase uint256 fixed_x1y1 = x1y1 * FIXED1_UINT; if (x1y1 != 0) require(fixed_x1y1 / x1y1 == FIXED1_UINT, "overflow x1y1 * fixed1 detected"); x1y1 = fixed_x1y1; uint256 x2y1 = x2 * y1; if (x2 != 0) require(x2y1 / x2 == y1, "overflow x2y1 detected"); uint256 x1y2 = x1 * y2; if (x1 != 0) require(x1y2 / x1 == y2, "overflow x1y2 detected"); x2 = x2 / mulPrecision(); y2 = y2 / mulPrecision(); uint256 x2y2 = x2 * y2; if (x2 != 0) require(x2y2 / x2 == y2, "overflow x2y2 detected"); // result = fixed1() * x1 * y1 + x1 * y2 + x2 * y1 + x2 * y2 / fixed1(); Fraction memory result = Fraction(x1y1); result = add(result, Fraction(x2y1)); // Add checks for overflow result = add(result, Fraction(x1y2)); // Add checks for overflow result = add(result, Fraction(x2y2)); // Add checks for overflow return result; } /** * @notice 1/x * @dev * Test reciprocal(0) fails * Test reciprocal(fixed1()) returns fixed1() * Test reciprocal(fixed1()*fixed1()) returns 1 // Testing how the fractional is truncated * Test reciprocal(1+fixed1()*fixed1()) returns 0 // Testing how the fractional is truncated * Test reciprocal(newFixedFraction(1, 1e24)) returns newFixed(1e24) */ function reciprocal(Fraction memory x) internal pure returns (Fraction memory) { require(x.value != 0, "can't call reciprocal(0)"); return Fraction((FIXED1_UINT * FIXED1_UINT) / x.value); // Can't overflow } /** * @notice x/y. If the dividend is higher than the max dividend value, it * might overflow. You can use multiply(x,reciprocal(y)) instead. * @dev The maximum value that can be safely used as a dividend (maxNewFixed) is defined as * divide(maxNewFixed,newFixedFraction(1,fixed1())) is around maxUint256(). * This yields the value 115792089237316195423570985008687907853269984665640564. * Test maxNewFixed equals maxUint256()/fixed1() * Test divide(maxNewFixed,1) equals maxNewFixed*(fixed1) * Test divide(maxNewFixed+1,multiply(mulPrecision(),mulPrecision())) throws * Test divide(fixed1(),0) fails * Test divide(maxNewFixed,1) = maxNewFixed*(10^digits()) * Test divide(maxNewFixed+1,1) throws */ function divide(Fraction memory x, Fraction memory y) internal pure returns (Fraction memory) { require(y.value != 0, "can't divide by 0"); // solhint-disable-next-line var-name-mixedcase uint256 X = x.value * FIXED1_UINT; require(X / FIXED1_UINT == x.value, "overflow at divide"); return Fraction(X / y.value); } /** * @notice x > y */ function gt(Fraction memory x, Fraction memory y) internal pure returns (bool) { return x.value > y.value; } /** * @notice x >= y */ function gte(Fraction memory x, Fraction memory y) internal pure returns (bool) { return x.value >= y.value; } /** * @notice x < y */ function lt(Fraction memory x, Fraction memory y) internal pure returns (bool) { return x.value < y.value; } /** * @notice x <= y */ function lte(Fraction memory x, Fraction memory y) internal pure returns (bool) { return x.value <= y.value; } /** * @notice x == y */ function equals(Fraction memory x, Fraction memory y) internal pure returns (bool) { return x.value == y.value; } /** * @notice x <= 1 */ function isProperFraction(Fraction memory x) internal pure returns (bool) { return lte(x, fixed1()); } }
/lib/mento-core/contracts/common/breakers/WithCooldown.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; /** * @title Breaker With Cooldown * @notice Utility portion of a Breaker contract which deals with the * cooldown component. */ contract WithCooldown { /* ==================== Events ==================== */ /** * @notice Emitted after the cooldownTime has been updated. * @param newCooldownTime The new cooldownTime of the breaker. */ event DefaultCooldownTimeUpdated(uint256 newCooldownTime); /** * @notice Emitted after the cooldownTime has been updated. * @param rateFeedID The rateFeedID targeted. * @param newCooldownTime The new cooldownTime of the breaker. */ event RateFeedCooldownTimeUpdated(address rateFeedID, uint256 newCooldownTime); /* ==================== State Variables ==================== */ // The amount of time that must pass before the breaker can be reset for a rate feed. // Should be set to 0 to force a manual reset. uint256 public defaultCooldownTime; mapping(address => uint256) public rateFeedCooldownTime; /* ==================== View Functions ==================== */ /** * @notice Get the cooldown time for a rateFeedID * @param rateFeedID the targeted rate feed. * @return the rate specific or default cooldown */ function getCooldown(address rateFeedID) public view returns (uint256) { uint256 _rateFeedCooldownTime = rateFeedCooldownTime[rateFeedID]; if (_rateFeedCooldownTime == 0) { return defaultCooldownTime; } return _rateFeedCooldownTime; } /* ==================== Internal Functions ==================== */ /** * @notice Sets the cooldown time to the specified value for a rate feed. * @param rateFeedIDs the targeted rate feed. * @param cooldownTimes The new cooldownTime value. * @dev Should be set to 0 to force a manual reset. */ function _setCooldownTimes(address[] memory rateFeedIDs, uint256[] memory cooldownTimes) internal { require(rateFeedIDs.length == cooldownTimes.length, "array length missmatch"); for (uint256 i = 0; i < rateFeedIDs.length; i++) { require(rateFeedIDs[i] != address(0), "rate feed invalid"); rateFeedCooldownTime[rateFeedIDs[i]] = cooldownTimes[i]; emit RateFeedCooldownTimeUpdated(rateFeedIDs[i], cooldownTimes[i]); } } /** * @notice Sets the cooldownTime to the specified value for a rate feed. * @param cooldownTime The new cooldownTime value. * @dev Should be set to 0 to force a manual reset. */ function _setDefaultCooldownTime(uint256 cooldownTime) internal { defaultCooldownTime = cooldownTime; emit DefaultCooldownTimeUpdated(cooldownTime); } }
/lib/mento-core/contracts/common/breakers/WithThreshold.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import { FixidityLib } from "../FixidityLib.sol"; import { SafeMath } from "openzeppelin-solidity/contracts/math/SafeMath.sol"; /** * @title Breaker With Thershold * @notice Utility portion of a Breaker contract which deals with * managing a threshold percentage and checking two values * . against it. */ contract WithThreshold { using FixidityLib for FixidityLib.Fraction; using SafeMath for uint256; /* ==================== Events ==================== */ // Emitted when the default rate threshold is updated. event DefaultRateChangeThresholdUpdated(uint256 defaultRateChangeThreshold); // Emitted when the rate threshold is updated. event RateChangeThresholdUpdated(address rateFeedID, uint256 rateChangeThreshold); /* ==================== State Variables ==================== */ // The default allowed threshold for the median rate change as a Fixidity fraction. FixidityLib.Fraction public defaultRateChangeThreshold; // Maps rate feed to a threshold. mapping(address => FixidityLib.Fraction) public rateChangeThreshold; /* ==================== View Functions ==================== */ /** * @notice Checks if a value is in a certain theshold of a given reference value. * @dev The reference value can be the previous median (MedianDeltaBreaker) or * a static value (ValueDeltaBreaker), while the currentValue is usually * the median after the most recent report. * @param referenceValue The reference value to check against. * @param currentValue The current value which is checked against the reference. * @param rateFeedID The specific rate ID to check threshold for. * @return Returns a bool indicating whether or not the current rate * is within the allowed threshold. */ function exceedsThreshold( uint256 referenceValue, uint256 currentValue, address rateFeedID ) public view returns (bool) { uint256 allowedThreshold = defaultRateChangeThreshold.unwrap(); uint256 rateSpecificThreshold = rateChangeThreshold[rateFeedID].unwrap(); // checks if a given rate feed id has a threshold set and reassignes it if (rateSpecificThreshold != 0) allowedThreshold = rateSpecificThreshold; uint256 fixed1 = FixidityLib.fixed1().unwrap(); uint256 maxPercent = uint256(fixed1).add(allowedThreshold); uint256 maxValue = (referenceValue.mul(maxPercent)).div(10**24); uint256 minPercent = uint256(fixed1).sub(allowedThreshold); uint256 minValue = (referenceValue.mul(minPercent)).div(10**24); return (currentValue < minValue || currentValue > maxValue); } /* ==================== Internal Functions ==================== */ /** * @notice Sets rateChangeThreshold. * @param _defaultRateChangeThreshold The new rateChangeThreshold value. */ function _setDefaultRateChangeThreshold(uint256 _defaultRateChangeThreshold) internal { defaultRateChangeThreshold = FixidityLib.wrap(_defaultRateChangeThreshold); require(defaultRateChangeThreshold.lt(FixidityLib.fixed1()), "value must be less than 1"); emit DefaultRateChangeThresholdUpdated(_defaultRateChangeThreshold); } /** * @notice Configures rate feed to rate threshold pairs. * @param rateFeedIDs Collection of the addresses rate feeds. * @param rateChangeThresholds Collection of the rate thresholds. */ function _setRateChangeThresholds(address[] memory rateFeedIDs, uint256[] memory rateChangeThresholds) internal { require(rateFeedIDs.length == rateChangeThresholds.length, "array length missmatch"); for (uint256 i = 0; i < rateFeedIDs.length; i++) { require(rateFeedIDs[i] != address(0), "rate feed invalid"); FixidityLib.Fraction memory _rateChangeThreshold = FixidityLib.wrap(rateChangeThresholds[i]); require(_rateChangeThreshold.lt(FixidityLib.fixed1()), "value must be less than 1"); rateChangeThreshold[rateFeedIDs[i]] = _rateChangeThreshold; emit RateChangeThresholdUpdated(rateFeedIDs[i], rateChangeThresholds[i]); } } }
/lib/mento-core/contracts/common/linkedlists/LinkedList.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import "openzeppelin-solidity/contracts/math/SafeMath.sol"; /** * @title Maintains a doubly linked list keyed by bytes32. * @dev Following the `next` pointers will lead you to the head, rather than the tail. */ library LinkedList { using SafeMath for uint256; struct Element { bytes32 previousKey; bytes32 nextKey; bool exists; } struct List { bytes32 head; bytes32 tail; uint256 numElements; mapping(bytes32 => Element) elements; } /** * @notice Inserts an element into a doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. * @param previousKey The key of the element that comes before the element to insert. * @param nextKey The key of the element that comes after the element to insert. */ function insert( List storage list, bytes32 key, bytes32 previousKey, bytes32 nextKey ) internal { require(key != bytes32(0), "Key must be defined"); require(!contains(list, key), "Can't insert an existing element"); require(previousKey != key && nextKey != key, "Key cannot be the same as previousKey or nextKey"); Element storage element = list.elements[key]; element.exists = true; if (list.numElements == 0) { list.tail = key; list.head = key; } else { require(previousKey != bytes32(0) || nextKey != bytes32(0), "Either previousKey or nextKey must be defined"); element.previousKey = previousKey; element.nextKey = nextKey; if (previousKey != bytes32(0)) { require(contains(list, previousKey), "If previousKey is defined, it must exist in the list"); Element storage previousElement = list.elements[previousKey]; require(previousElement.nextKey == nextKey, "previousKey must be adjacent to nextKey"); previousElement.nextKey = key; } else { list.tail = key; } if (nextKey != bytes32(0)) { require(contains(list, nextKey), "If nextKey is defined, it must exist in the list"); Element storage nextElement = list.elements[nextKey]; require(nextElement.previousKey == previousKey, "previousKey must be adjacent to nextKey"); nextElement.previousKey = key; } else { list.head = key; } } list.numElements = list.numElements.add(1); } /** * @notice Inserts an element at the tail of the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. */ function push(List storage list, bytes32 key) internal { insert(list, key, bytes32(0), list.tail); } /** * @notice Removes an element from the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to remove. */ function remove(List storage list, bytes32 key) internal { Element storage element = list.elements[key]; require(key != bytes32(0) && contains(list, key), "key not in list"); if (element.previousKey != bytes32(0)) { Element storage previousElement = list.elements[element.previousKey]; previousElement.nextKey = element.nextKey; } else { list.tail = element.nextKey; } if (element.nextKey != bytes32(0)) { Element storage nextElement = list.elements[element.nextKey]; nextElement.previousKey = element.previousKey; } else { list.head = element.previousKey; } delete list.elements[key]; list.numElements = list.numElements.sub(1); } /** * @notice Updates an element in the list. * @param list A storage pointer to the underlying list. * @param key The element key. * @param previousKey The key of the element that comes before the updated element. * @param nextKey The key of the element that comes after the updated element. */ function update( List storage list, bytes32 key, bytes32 previousKey, bytes32 nextKey ) internal { require(key != bytes32(0) && key != previousKey && key != nextKey && contains(list, key), "key on in list"); remove(list, key); insert(list, key, previousKey, nextKey); } /** * @notice Returns whether or not a particular key is present in the sorted list. * @param list A storage pointer to the underlying list. * @param key The element key. * @return Whether or not the key is in the sorted list. */ function contains(List storage list, bytes32 key) internal view returns (bool) { return list.elements[key].exists; } /** * @notice Returns the keys of the N elements at the head of the list. * @param list A storage pointer to the underlying list. * @param n The number of elements to return. * @return The keys of the N elements at the head of the list. * @dev Reverts if n is greater than the number of elements in the list. */ function headN(List storage list, uint256 n) internal view returns (bytes32[] memory) { require(n <= list.numElements, "not enough elements"); bytes32[] memory keys = new bytes32[](n); bytes32 key = list.head; for (uint256 i = 0; i < n; i = i.add(1)) { keys[i] = key; key = list.elements[key].previousKey; } return keys; } /** * @notice Gets all element keys from the doubly linked list. * @param list A storage pointer to the underlying list. * @return All element keys from head to tail. */ function getKeys(List storage list) internal view returns (bytes32[] memory) { return headN(list, list.numElements); } }
/lib/mento-core/contracts/common/linkedlists/SortedLinkedList.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import "openzeppelin-solidity/contracts/math/SafeMath.sol"; import "./LinkedList.sol"; /** * @title Maintains a sorted list of unsigned ints keyed by bytes32. */ library SortedLinkedList { using SafeMath for uint256; using LinkedList for LinkedList.List; struct List { LinkedList.List list; mapping(bytes32 => uint256) values; } /** * @notice Inserts an element into a doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. * @param value The element value. * @param lesserKey The key of the element less than the element to insert. * @param greaterKey The key of the element greater than the element to insert. */ function insert( List storage list, bytes32 key, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) internal { require(key != bytes32(0) && key != lesserKey && key != greaterKey && !contains(list, key), "invalid key"); require( (lesserKey != bytes32(0) || greaterKey != bytes32(0)) || list.list.numElements == 0, "greater and lesser key zero" ); require(contains(list, lesserKey) || lesserKey == bytes32(0), "invalid lesser key"); require(contains(list, greaterKey) || greaterKey == bytes32(0), "invalid greater key"); (lesserKey, greaterKey) = getLesserAndGreater(list, value, lesserKey, greaterKey); list.list.insert(key, lesserKey, greaterKey); list.values[key] = value; } /** * @notice Removes an element from the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to remove. */ function remove(List storage list, bytes32 key) internal { list.list.remove(key); list.values[key] = 0; } /** * @notice Updates an element in the list. * @param list A storage pointer to the underlying list. * @param key The element key. * @param value The element value. * @param lesserKey The key of the element will be just left of `key` after the update. * @param greaterKey The key of the element will be just right of `key` after the update. * @dev Note that only one of "lesserKey" or "greaterKey" needs to be correct to reduce friction. */ function update( List storage list, bytes32 key, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) internal { remove(list, key); insert(list, key, value, lesserKey, greaterKey); } /** * @notice Inserts an element at the tail of the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. */ function push(List storage list, bytes32 key) internal { insert(list, key, 0, bytes32(0), list.list.tail); } /** * @notice Removes N elements from the head of the list and returns their keys. * @param list A storage pointer to the underlying list. * @param n The number of elements to pop. * @return The keys of the popped elements. */ function popN(List storage list, uint256 n) internal returns (bytes32[] memory) { require(n <= list.list.numElements, "not enough elements"); bytes32[] memory keys = new bytes32[](n); for (uint256 i = 0; i < n; i = i.add(1)) { bytes32 key = list.list.head; keys[i] = key; remove(list, key); } return keys; } /** * @notice Returns whether or not a particular key is present in the sorted list. * @param list A storage pointer to the underlying list. * @param key The element key. * @return Whether or not the key is in the sorted list. */ function contains(List storage list, bytes32 key) internal view returns (bool) { return list.list.contains(key); } /** * @notice Returns the value for a particular key in the sorted list. * @param list A storage pointer to the underlying list. * @param key The element key. * @return The element value. */ function getValue(List storage list, bytes32 key) internal view returns (uint256) { return list.values[key]; } /** * @notice Gets all elements from the doubly linked list. * @param list A storage pointer to the underlying list. * @return Array of all keys in the list. * @return Values corresponding to keys, which will be ordered largest to smallest. */ function getElements(List storage list) internal view returns (bytes32[] memory, uint256[] memory) { bytes32[] memory keys = getKeys(list); uint256[] memory values = new uint256[](keys.length); for (uint256 i = 0; i < keys.length; i = i.add(1)) { values[i] = list.values[keys[i]]; } return (keys, values); } /** * @notice Gets all element keys from the doubly linked list. * @param list A storage pointer to the underlying list. * @return All element keys from head to tail. */ function getKeys(List storage list) internal view returns (bytes32[] memory) { return list.list.getKeys(); } /** * @notice Returns first N greatest elements of the list. * @param list A storage pointer to the underlying list. * @param n The number of elements to return. * @return The keys of the first n elements. * @dev Reverts if n is greater than the number of elements in the list. */ function headN(List storage list, uint256 n) internal view returns (bytes32[] memory) { return list.list.headN(n); } /** * @notice Returns the keys of the elements greaterKey than and less than the provided value. * @param list A storage pointer to the underlying list. * @param value The element value. * @param lesserKey The key of the element which could be just left of the new value. * @param greaterKey The key of the element which could be just right of the new value. * @return The correct lesserKey keys. * @return The correct greaterKey keys. */ function getLesserAndGreater( List storage list, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) private view returns (bytes32, bytes32) { // Check for one of the following conditions and fail if none are met: // 1. The value is less than the current lowest value // 2. The value is greater than the current greatest value // 3. The value is just greater than the value for `lesserKey` // 4. The value is just less than the value for `greaterKey` if (lesserKey == bytes32(0) && isValueBetween(list, value, lesserKey, list.list.tail)) { return (lesserKey, list.list.tail); } else if (greaterKey == bytes32(0) && isValueBetween(list, value, list.list.head, greaterKey)) { return (list.list.head, greaterKey); } else if ( lesserKey != bytes32(0) && isValueBetween(list, value, lesserKey, list.list.elements[lesserKey].nextKey) ) { return (lesserKey, list.list.elements[lesserKey].nextKey); } else if ( greaterKey != bytes32(0) && isValueBetween(list, value, list.list.elements[greaterKey].previousKey, greaterKey) ) { return (list.list.elements[greaterKey].previousKey, greaterKey); } else { require(false, "get lesser and greater failure"); } } /** * @notice Returns whether or not a given element is between two other elements. * @param list A storage pointer to the underlying list. * @param value The element value. * @param lesserKey The key of the element whose value should be lesserKey. * @param greaterKey The key of the element whose value should be greaterKey. * @return True if the given element is between the two other elements. */ function isValueBetween( List storage list, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) private view returns (bool) { bool isLesser = lesserKey == bytes32(0) || list.values[lesserKey] <= value; bool isGreater = greaterKey == bytes32(0) || list.values[greaterKey] >= value; return isLesser && isGreater; } }
/lib/mento-core/contracts/common/linkedlists/SortedLinkedListWithMedian.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import "openzeppelin-solidity/contracts/math/SafeMath.sol"; import "./LinkedList.sol"; import "./SortedLinkedList.sol"; /** * @title Maintains a sorted list of unsigned ints keyed by bytes32. */ library SortedLinkedListWithMedian { using SafeMath for uint256; using SortedLinkedList for SortedLinkedList.List; enum MedianAction { None, Lesser, Greater } enum MedianRelation { Undefined, Lesser, Greater, Equal } struct List { SortedLinkedList.List list; bytes32 median; mapping(bytes32 => MedianRelation) relation; } /** * @notice Inserts an element into a doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. * @param value The element value. * @param lesserKey The key of the element less than the element to insert. * @param greaterKey The key of the element greater than the element to insert. */ function insert( List storage list, bytes32 key, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) internal { list.list.insert(key, value, lesserKey, greaterKey); LinkedList.Element storage element = list.list.list.elements[key]; MedianAction action = MedianAction.None; if (list.list.list.numElements == 1) { list.median = key; list.relation[key] = MedianRelation.Equal; } else if (list.list.list.numElements % 2 == 1) { // When we have an odd number of elements, and the element that we inserted is less than // the previous median, we need to slide the median down one element, since we had previously // selected the greater of the two middle elements. if (element.previousKey == bytes32(0) || list.relation[element.previousKey] == MedianRelation.Lesser) { action = MedianAction.Lesser; list.relation[key] = MedianRelation.Lesser; } else { list.relation[key] = MedianRelation.Greater; } } else { // When we have an even number of elements, and the element that we inserted is greater than // the previous median, we need to slide the median up one element, since we always select // the greater of the two middle elements. if (element.nextKey == bytes32(0) || list.relation[element.nextKey] == MedianRelation.Greater) { action = MedianAction.Greater; list.relation[key] = MedianRelation.Greater; } else { list.relation[key] = MedianRelation.Lesser; } } updateMedian(list, action); } /** * @notice Removes an element from the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to remove. */ function remove(List storage list, bytes32 key) internal { MedianAction action = MedianAction.None; if (list.list.list.numElements == 0) { list.median = bytes32(0); } else if (list.list.list.numElements % 2 == 0) { // When we have an even number of elements, we always choose the higher of the two medians. // Thus, if the element we're removing is greaterKey than or equal to the median we need to // slide the median left by one. if (list.relation[key] == MedianRelation.Greater || list.relation[key] == MedianRelation.Equal) { action = MedianAction.Lesser; } } else { // When we don't have an even number of elements, we just choose the median value. // Thus, if the element we're removing is less than or equal to the median, we need to slide // median right by one. if (list.relation[key] == MedianRelation.Lesser || list.relation[key] == MedianRelation.Equal) { action = MedianAction.Greater; } } updateMedian(list, action); list.list.remove(key); } /** * @notice Updates an element in the list. * @param list A storage pointer to the underlying list. * @param key The element key. * @param value The element value. * @param lesserKey The key of the element will be just left of `key` after the update. * @param greaterKey The key of the element will be just right of `key` after the update. * @dev Note that only one of "lesserKey" or "greaterKey" needs to be correct to reduce friction. */ function update( List storage list, bytes32 key, uint256 value, bytes32 lesserKey, bytes32 greaterKey ) internal { remove(list, key); insert(list, key, value, lesserKey, greaterKey); } /** * @notice Inserts an element at the tail of the doubly linked list. * @param list A storage pointer to the underlying list. * @param key The key of the element to insert. */ function push(List storage list, bytes32 key) internal { insert(list, key, 0, bytes32(0), list.list.list.tail); } /** * @notice Removes N elements from the head of the list and returns their keys. * @param list A storage pointer to the underlying list. * @param n The number of elements to pop. * @return The keys of the popped elements. */ function popN(List storage list, uint256 n) internal returns (bytes32[] memory) { require(n <= list.list.list.numElements, "not enough elements"); bytes32[] memory keys = new bytes32[](n); for (uint256 i = 0; i < n; i = i.add(1)) { bytes32 key = list.list.list.head; keys[i] = key; remove(list, key); } return keys; } /** * @notice Returns whether or not a particular key is present in the sorted list. * @param list A storage pointer to the underlying list. * @param key The element key. * @return Whether or not the key is in the sorted list. */ function contains(List storage list, bytes32 key) internal view returns (bool) { return list.list.contains(key); } /** * @notice Returns the value for a particular key in the sorted list. * @param list A storage pointer to the underlying list. * @param key The element key. * @return The element value. */ function getValue(List storage list, bytes32 key) internal view returns (uint256) { return list.list.values[key]; } /** * @notice Returns the median value of the sorted list. * @param list A storage pointer to the underlying list. * @return The median value. */ function getMedianValue(List storage list) internal view returns (uint256) { return getValue(list, list.median); } /** * @notice Returns the key of the first element in the list. * @param list A storage pointer to the underlying list. * @return The key of the first element in the list. */ function getHead(List storage list) internal view returns (bytes32) { return list.list.list.head; } /** * @notice Returns the key of the median element in the list. * @param list A storage pointer to the underlying list. * @return The key of the median element in the list. */ function getMedian(List storage list) internal view returns (bytes32) { return list.median; } /** * @notice Returns the key of the last element in the list. * @param list A storage pointer to the underlying list. * @return The key of the last element in the list. */ function getTail(List storage list) internal view returns (bytes32) { return list.list.list.tail; } /** * @notice Returns the number of elements in the list. * @param list A storage pointer to the underlying list. * @return The number of elements in the list. */ function getNumElements(List storage list) internal view returns (uint256) { return list.list.list.numElements; } /** * @notice Gets all elements from the doubly linked list. * @param list A storage pointer to the underlying list. * @return Array of all keys in the list. * @return Values corresponding to keys, which will be ordered largest to smallest. * @return Array of relations to median of corresponding list elements. */ function getElements(List storage list) internal view returns ( bytes32[] memory, uint256[] memory, MedianRelation[] memory ) { bytes32[] memory keys = getKeys(list); uint256[] memory values = new uint256[](keys.length); MedianRelation[] memory relations = new MedianRelation[](keys.length); for (uint256 i = 0; i < keys.length; i = i.add(1)) { values[i] = list.list.values[keys[i]]; relations[i] = list.relation[keys[i]]; } return (keys, values, relations); } /** * @notice Gets all element keys from the doubly linked list. * @param list A storage pointer to the underlying list. * @return All element keys from head to tail. */ function getKeys(List storage list) internal view returns (bytes32[] memory) { return list.list.getKeys(); } /** * @notice Moves the median pointer right or left of its current value. * @param list A storage pointer to the underlying list. * @param action Which direction to move the median pointer. */ function updateMedian(List storage list, MedianAction action) private { LinkedList.Element storage previousMedian = list.list.list.elements[list.median]; if (action == MedianAction.Lesser) { list.relation[list.median] = MedianRelation.Greater; list.median = previousMedian.previousKey; } else if (action == MedianAction.Greater) { list.relation[list.median] = MedianRelation.Lesser; list.median = previousMedian.nextKey; } list.relation[list.median] = MedianRelation.Equal; } }
/lib/mento-core/contracts/interfaces/IBreaker.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; /** * @title Breaker Interface * @notice Defines the basic interface for a Breaker */ interface IBreaker { /** * @notice Emitted when the sortedOracles address is updated. * @param newSortedOracles The address of the new sortedOracles. */ event SortedOraclesUpdated(address newSortedOracles); /** * @notice Retrieve the cooldown time for the breaker. * @param rateFeedID The rate feed to get the cooldown for * @return cooldown The amount of time that must pass before the breaker can reset. * @dev when cooldown is 0 auto reset will not be attempted. */ function getCooldown(address rateFeedID) external view returns (uint256 cooldown); /** * @notice Check if the criteria have been met, by a specified rateFeedID, to trigger the breaker. * @param rateFeedID The address of the rate feed to run the check against. * @return triggerBreaker A boolean indicating whether or not the breaker * should be triggered for the given rate feed. */ function shouldTrigger(address rateFeedID) external returns (bool triggerBreaker); /** * @notice Check if the criteria to automatically reset the breaker have been met. * @param rateFeedID The address of rate feed the criteria should be checked against. * @return resetBreaker A boolean indicating whether the breaker * should be reset for the given rate feed. * @dev Allows the definition of additional critera to check before reset. * If no additional criteria is needed set to !shouldTrigger(); */ function shouldReset(address rateFeedID) external returns (bool resetBreaker); }
/lib/mento-core/contracts/interfaces/ISortedOracles.sol
// SPDX-License-Identifier: GPL-3.0-or-later pragma solidity ^0.5.13; import "../common/linkedlists/SortedLinkedListWithMedian.sol"; interface ISortedOracles { function addOracle(address, address) external; function removeOracle( address, address, uint256 ) external; function report( address, uint256, address, address ) external; function removeExpiredReports(address, uint256) external; function isOldestReportExpired(address token) external view returns (bool, address); function numRates(address) external view returns (uint256); function medianRate(address) external view returns (uint256, uint256); function numTimestamps(address) external view returns (uint256); function medianTimestamp(address) external view returns (uint256); function getOracles(address) external view returns (address[] memory); function getTimestamps(address token) external view returns ( address[] memory, uint256[] memory, SortedLinkedListWithMedian.MedianRelation[] memory ); }
/lib/mento-core/lib/openzeppelin-contracts/contracts/GSN/Context.sol
pragma solidity ^0.5.0; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ contract Context { // Empty internal constructor, to prevent people from mistakenly deploying // an instance of this contract, which should be used via inheritance. constructor () internal { } // solhint-disable-previous-line no-empty-blocks function _msgSender() internal view returns (address payable) { return msg.sender; } function _msgData() internal view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } }
/lib/mento-core/lib/openzeppelin-contracts/contracts/math/SafeMath.sol
pragma solidity ^0.5.0; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * - Subtraction cannot overflow. * * _Available since v2.4.0._ */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * - The divisor cannot be zero. * * _Available since v2.4.0._ */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { // Solidity only automatically asserts when dividing by 0 require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * - The divisor cannot be zero. * * _Available since v2.4.0._ */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } }
/lib/mento-core/lib/openzeppelin-contracts/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0; import "../GSN/Context.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor () internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(isOwner(), "Ownable: caller is not the owner"); _; } /** * @dev Returns true if the caller is the current owner. */ function isOwner() public view returns (bool) { return _msgSender() == _owner; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public onlyOwner { _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). */ function _transferOwnership(address newOwner) internal { require(newOwner != address(0), "Ownable: new owner is the zero address"); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } }
Contract ABI
[{"type":"constructor","stateMutability":"nonpayable","payable":false,"inputs":[{"type":"uint256","name":"_defaultCooldownTime","internalType":"uint256"},{"type":"uint256","name":"_defaultRateChangeThreshold","internalType":"uint256"},{"type":"address","name":"_sortedOracles","internalType":"contract ISortedOracles"},{"type":"address[]","name":"rateFeedIDs","internalType":"address[]"},{"type":"uint256[]","name":"rateChangeThresholds","internalType":"uint256[]"},{"type":"uint256[]","name":"cooldownTimes","internalType":"uint256[]"}]},{"type":"event","name":"DefaultCooldownTimeUpdated","inputs":[{"type":"uint256","name":"newCooldownTime","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"DefaultRateChangeThresholdUpdated","inputs":[{"type":"uint256","name":"defaultRateChangeThreshold","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"RateChangeThresholdUpdated","inputs":[{"type":"address","name":"rateFeedID","internalType":"address","indexed":false},{"type":"uint256","name":"rateChangeThreshold","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"RateFeedCooldownTimeUpdated","inputs":[{"type":"address","name":"rateFeedID","internalType":"address","indexed":false},{"type":"uint256","name":"newCooldownTime","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"SortedOraclesUpdated","inputs":[{"type":"address","name":"newSortedOracles","internalType":"address","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"defaultCooldownTime","inputs":[],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"value","internalType":"uint256"}],"name":"defaultRateChangeThreshold","inputs":[],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"exceedsThreshold","inputs":[{"type":"uint256","name":"referenceValue","internalType":"uint256"},{"type":"uint256","name":"currentValue","internalType":"uint256"},{"type":"address","name":"rateFeedID","internalType":"address"}],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getCooldown","inputs":[{"type":"address","name":"rateFeedID","internalType":"address"}],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"isOwner","inputs":[],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"previousMedianRates","inputs":[{"type":"address","name":"","internalType":"address"}],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"value","internalType":"uint256"}],"name":"rateChangeThreshold","inputs":[{"type":"address","name":"","internalType":"address"}],"constant":true},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"rateFeedCooldownTime","inputs":[{"type":"address","name":"","internalType":"address"}],"constant":true},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"renounceOwnership","inputs":[],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"setCooldownTime","inputs":[{"type":"address[]","name":"rateFeedIDs","internalType":"address[]"},{"type":"uint256[]","name":"cooldownTimes","internalType":"uint256[]"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"setDefaultCooldownTime","inputs":[{"type":"uint256","name":"cooldownTime","internalType":"uint256"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"setDefaultRateChangeThreshold","inputs":[{"type":"uint256","name":"_defaultRateChangeThreshold","internalType":"uint256"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"setRateChangeThresholds","inputs":[{"type":"address[]","name":"rateFeedIDs","internalType":"address[]"},{"type":"uint256[]","name":"rateChangeThresholds","internalType":"uint256[]"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"setSortedOracles","inputs":[{"type":"address","name":"_sortedOracles","internalType":"contract ISortedOracles"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[{"type":"bool","name":"resetBreaker","internalType":"bool"}],"name":"shouldReset","inputs":[{"type":"address","name":"rateFeedID","internalType":"address"}],"constant":false},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[{"type":"bool","name":"triggerBreaker","internalType":"bool"}],"name":"shouldTrigger","inputs":[{"type":"address","name":"rateFeedID","internalType":"address"}],"constant":false},{"type":"function","stateMutability":"view","payable":false,"outputs":[{"type":"address","name":"","internalType":"contract ISortedOracles"}],"name":"sortedOracles","inputs":[],"constant":true},{"type":"function","stateMutability":"nonpayable","payable":false,"outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}],"constant":false}]
Contract Creation Code
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
Deployed ByteCode
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