Address Details

contract

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity ^0.8.10;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import {ERC4626Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol";
import {SafeERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import {MathUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol";
import "src/interfaces/IMoolaLendingPool.sol";
import "src/interfaces/IStableToken.sol";
import "src/staking/StakedERC4626Upgradeable.sol";
import "src/interfaces/IRegistry.sol";

import "src/staking/SpiralsCUSDVault.sol";
import "src/vaults/ImpactVault.sol";
import "src/vaults/SpiralsCUSDImpactVault.sol";
import "src/staking/migration/IMigrationToImpactVault.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";

contract SpiralsCUSDVaultMigration is
    IMigrationToImpactVault,
    SpiralsCUSDVault
{
    /// @param _yields values will come from subgraph
    function transferAssetsToImpactVault(
        address[] memory _addrs,
        ImpactVault _vault,
        uint256[] memory _yields
    ) external onlyOwner whenPaused {
        for (uint256 i = 0; i < _addrs.length; i++) {
            transferAssetsToImpactVaultForAddress(
                _addrs[i],
                _vault,
                _yields[i]
            );
        }
    }

    function transferAssetsToImpactVaultForAddress(
        address _address,
        ImpactVault _vault,
        uint256 _yield
    ) public onlyOwner whenPaused {
        uint256 cUSDStaked = balanceOf(_address);
        uint256 totalCUSD = cUSDStaked + _yield;
        if (totalCUSD == 0) {
            return;
        }

        // withdraw from Moola LP (mcUSD -> cUSD)
        c_moolaLendingPool.withdraw(asset(), totalCUSD, address(this));
        _burn(_address, cUSDStaked);

        // deposit into new vault
        IERC20Upgradeable(asset()).approve(address(_vault), totalCUSD);
        SpiralsCUSDImpactVault cUSDVault = SpiralsCUSDImpactVault(
            payable(address(_vault))
        );
        cUSDVault.depositWithYield(cUSDStaked, _address, _yield);
        emit AssetsTransferredToImpactVault(
            _address,
            cUSDStaked,
            _yield,
            address(_vault)
        );

        // This event will decrease cUSD staked count on Spirals subgraph
        // but as long as subgraph is handling "Deposit" event appropriately
        // on the new vault then we are good.
        emit Withdraw(msg.sender, _address, _address, cUSDStaked, cUSDStaked);
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }
}
        

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerableUpgradeable.sol";
import "./AccessControlUpgradeable.sol";
import "../utils/structs/EnumerableSetUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {
    function __AccessControlEnumerable_init() internal onlyInitializing {
    }

    function __AccessControlEnumerable_init_unchained() internal onlyInitializing {
    }
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    mapping(bytes32 => EnumerableSetUpgradeable.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../utils/StringsUpgradeable.sol";
import "../utils/introspection/ERC165Upgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
    function __AccessControl_init() internal onlyInitializing {
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        StringsUpgradeable.toHexString(account),
                        " is missing role ",
                        StringsUpgradeable.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControlUpgradeable {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20Upgradeable.sol";
import "../token/ERC20/extensions/IERC20MetadataUpgradeable.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626Upgradeable is IERC20Upgradeable, IERC20MetadataUpgradeable {
    event Deposit(address indexed caller, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed caller,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) external returns (uint256 assets);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[45] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;

import "../ERC20Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
    function __ERC20Burnable_init() internal onlyInitializing {
    }

    function __ERC20Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/ERC20Pausable.sol)

pragma solidity ^0.8.0;

import "../ERC20Upgradeable.sol";
import "../../../security/PausableUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {
    function __ERC20Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __ERC20Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.0;

import "../ERC20Upgradeable.sol";
import "../utils/SafeERC20Upgradeable.sol";
import "../../../interfaces/IERC4626Upgradeable.sol";
import "../../../utils/math/MathUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[EIP-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * CAUTION: Deposits and withdrawals may incur unexpected slippage. Users should verify that the amount received of
 * shares or assets is as expected. EOAs should operate through a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * _Available since v4.7._
 */
abstract contract ERC4626Upgradeable is Initializable, ERC20Upgradeable, IERC4626Upgradeable {
    using MathUpgradeable for uint256;

    IERC20MetadataUpgradeable private _asset;

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC20 or ERC777).
     */
    function __ERC4626_init(IERC20MetadataUpgradeable asset_) internal onlyInitializing {
        __ERC4626_init_unchained(asset_);
    }

    function __ERC4626_init_unchained(IERC20MetadataUpgradeable asset_) internal onlyInitializing {
        _asset = asset_;
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual override returns (address) {
        return address(_asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual override returns (uint256) {
        return _asset.balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual override returns (uint256 shares) {
        return _convertToShares(assets, MathUpgradeable.Rounding.Down);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual override returns (uint256 assets) {
        return _convertToAssets(shares, MathUpgradeable.Rounding.Down);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual override returns (uint256) {
        return _isVaultCollateralized() ? type(uint256).max : 0;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual override returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual override returns (uint256) {
        return _convertToAssets(balanceOf(owner), MathUpgradeable.Rounding.Down);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual override returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual override returns (uint256) {
        return _convertToShares(assets, MathUpgradeable.Rounding.Down);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual override returns (uint256) {
        return _convertToAssets(shares, MathUpgradeable.Rounding.Up);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {
        return _convertToShares(assets, MathUpgradeable.Rounding.Up);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual override returns (uint256) {
        return _convertToAssets(shares, MathUpgradeable.Rounding.Down);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual override returns (uint256) {
        require(assets <= maxDeposit(receiver), "ERC4626: deposit more than max");

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}. */
    function mint(uint256 shares, address receiver) public virtual override returns (uint256) {
        require(shares <= maxMint(receiver), "ERC4626: mint more than max");

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(assets <= maxWithdraw(owner), "ERC4626: withdraw more than max");

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) public virtual override returns (uint256) {
        require(shares <= maxRedeem(owner), "ERC4626: redeem more than max");

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     *
     * Will revert if assets > 0, totalSupply > 0 and totalAssets = 0. That corresponds to a case where any asset
     * would represent an infinite amout of shares.
     */
    function _convertToShares(uint256 assets, MathUpgradeable.Rounding rounding)
        internal
        view
        virtual
        returns (uint256 shares)
    {
        uint256 supply = totalSupply();
        return
            (assets == 0 || supply == 0)
                ? assets.mulDiv(10**decimals(), 10**_asset.decimals(), rounding)
                : assets.mulDiv(supply, totalAssets(), rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, MathUpgradeable.Rounding rounding)
        internal
        view
        virtual
        returns (uint256 assets)
    {
        uint256 supply = totalSupply();
        return
            (supply == 0)
                ? shares.mulDiv(10**_asset.decimals(), 10**decimals(), rounding)
                : shares.mulDiv(totalAssets(), supply, rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(
        address caller,
        address receiver,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        // If _asset is ERC777, `transferFrom` can trigger a reenterancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transfered and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20Upgradeable.safeTransferFrom(_asset, caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transfered, which is a valid state.
        _burn(owner, shares);
        SafeERC20Upgradeable.safeTransfer(_asset, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _isVaultCollateralized() private view returns (bool) {
        return totalAssets() > 0 || totalSupply() == 0;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20PermitUpgradeable {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/presets/ERC20PresetMinterPauser.sol)

pragma solidity ^0.8.0;

import "../ERC20Upgradeable.sol";
import "../extensions/ERC20BurnableUpgradeable.sol";
import "../extensions/ERC20PausableUpgradeable.sol";
import "../../../access/AccessControlEnumerableUpgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev {ERC20} token, including:
 *
 *  - ability for holders to burn (destroy) their tokens
 *  - a minter role that allows for token minting (creation)
 *  - a pauser role that allows to stop all token transfers
 *
 * This contract uses {AccessControl} to lock permissioned functions using the
 * different roles - head to its documentation for details.
 *
 * The account that deploys the contract will be granted the minter and pauser
 * roles, as well as the default admin role, which will let it grant both minter
 * and pauser roles to other accounts.
 *
 * _Deprecated in favor of https://wizard.openzeppelin.com/[Contracts Wizard]._
 */
contract ERC20PresetMinterPauserUpgradeable is
    Initializable,
    ContextUpgradeable,
    AccessControlEnumerableUpgradeable,
    ERC20BurnableUpgradeable,
    ERC20PausableUpgradeable
{
    function initialize(string memory name, string memory symbol) public virtual initializer {
        __ERC20PresetMinterPauser_init(name, symbol);
    }

    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
     * account that deploys the contract.
     *
     * See {ERC20-constructor}.
     */
    function __ERC20PresetMinterPauser_init(string memory name, string memory symbol) internal onlyInitializing {
        __ERC20_init_unchained(name, symbol);
        __Pausable_init_unchained();
        __ERC20PresetMinterPauser_init_unchained(name, symbol);
    }

    function __ERC20PresetMinterPauser_init_unchained(string memory, string memory) internal onlyInitializing {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());
    }

    /**
     * @dev Creates `amount` new tokens for `to`.
     *
     * See {ERC20-_mint}.
     *
     * Requirements:
     *
     * - the caller must have the `MINTER_ROLE`.
     */
    function mint(address to, uint256 amount) public virtual {
        require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
        _mint(to, amount);
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override(ERC20Upgradeable, ERC20PausableUpgradeable) {
        super._beforeTokenTransfer(from, to, amount);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";
import "../extensions/draft-IERC20PermitUpgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20Upgradeable {
    using AddressUpgradeable for address;

    function safeTransfer(
        IERC20Upgradeable token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20Upgradeable token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20PermitUpgradeable token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUpgradeable {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb computation, we are able to compute `result = 2**(k/2)` which is a
        // good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}
          

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}
          

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.11;
pragma experimental ABIEncoderV2;

import {IMoolaLendingPoolAddressesProvider} from "./IMoolaLendingPoolAddressesProvider.sol";
import {DataTypes} from "./MoolaDataTypes.sol";

interface IMoolaLendingPool {
    /**
     * @dev Emitted on deposit()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address initiating the deposit
     * @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
     * @param amount The amount deposited
     * @param referral The referral code used
     **/
    event Deposit(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint16 indexed referral
    );

    /**
     * @dev Emitted on withdraw()
     * @param reserve The address of the underlyng asset being withdrawn
     * @param user The address initiating the withdrawal, owner of aTokens
     * @param to Address that will receive the underlying
     * @param amount The amount to be withdrawn
     **/
    event Withdraw(
        address indexed reserve,
        address indexed user,
        address indexed to,
        uint256 amount
    );

    /**
     * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
     * @param reserve The address of the underlying asset being borrowed
     * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
     * initiator of the transaction on flashLoan()
     * @param onBehalfOf The address that will be getting the debt
     * @param amount The amount borrowed out
     * @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
     * @param borrowRate The numeric rate at which the user has borrowed
     * @param referral The referral code used
     **/
    event Borrow(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint256 borrowRateMode,
        uint256 borrowRate,
        uint16 indexed referral
    );

    /**
     * @dev Emitted on repay()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The beneficiary of the repayment, getting his debt reduced
     * @param repayer The address of the user initiating the repay(), providing the funds
     * @param amount The amount repaid
     **/
    event Repay(
        address indexed reserve,
        address indexed user,
        address indexed repayer,
        uint256 amount
    );

    /**
     * @dev Emitted on swapBorrowRateMode()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user swapping his rate mode
     * @param rateMode The rate mode that the user wants to swap to
     **/
    event Swap(address indexed reserve, address indexed user, uint256 rateMode);

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     **/
    event ReserveUsedAsCollateralEnabled(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     **/
    event ReserveUsedAsCollateralDisabled(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on rebalanceStableBorrowRate()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user for which the rebalance has been executed
     **/
    event RebalanceStableBorrowRate(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on flashLoan()
     * @param target The address of the flash loan receiver contract
     * @param initiator The address initiating the flash loan
     * @param asset The address of the asset being flash borrowed
     * @param amount The amount flash borrowed
     * @param premium The fee flash borrowed
     * @param referralCode The referral code used
     **/
    event FlashLoan(
        address indexed target,
        address indexed initiator,
        address indexed asset,
        uint256 amount,
        uint256 premium,
        uint16 referralCode
    );

    /**
     * @dev Emitted when the pause is triggered.
     */
    event Paused();

    /**
     * @dev Emitted when the pause is lifted.
     */
    event Unpaused();

    /**
     * @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
     * LendingPoolCollateral manager using a DELEGATECALL
     * This allows to have the events in the generated ABI for LendingPool.
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
     * @param liquidator The address of the liquidator
     * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     **/
    event LiquidationCall(
        address indexed collateralAsset,
        address indexed debtAsset,
        address indexed user,
        uint256 debtToCover,
        uint256 liquidatedCollateralAmount,
        address liquidator,
        bool receiveAToken
    );

    /**
     * @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
     * in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
     * the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
     * gets added to the LendingPool ABI
     * @param reserve The address of the underlying asset of the reserve
     * @param liquidityRate The new liquidity rate
     * @param stableBorrowRate The new stable borrow rate
     * @param variableBorrowRate The new variable borrow rate
     * @param liquidityIndex The new liquidity index
     * @param variableBorrowIndex The new variable borrow index
     **/
    event ReserveDataUpdated(
        address indexed reserve,
        uint256 liquidityRate,
        uint256 stableBorrowRate,
        uint256 variableBorrowRate,
        uint256 liquidityIndex,
        uint256 variableBorrowIndex
    );

    /**
     * @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
     * - E.g. User deposits 100 USDC and gets in return 100 aUSDC
     * @param asset The address of the underlying asset to deposit
     * @param amount The amount to be deposited
     * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
     *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
     *   is a different wallet
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     **/
    function deposit(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode
    ) external;

    /**
     * @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
     * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
     * @param asset The address of the underlying asset to withdraw
     * @param amount The underlying amount to be withdrawn
     *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
     * @param to Address that will receive the underlying, same as msg.sender if the user
     *   wants to receive it on his own wallet, or a different address if the beneficiary is a
     *   different wallet
     * @return The final amount withdrawn
     **/
    function withdraw(
        address asset,
        uint256 amount,
        address to
    ) external returns (uint256);

    /**
     * @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
     * already deposited enough collateral, or he was given enough allowance by a credit delegator on the
     * corresponding debt token (StableDebtToken or VariableDebtToken)
     * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
     *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
     * @param asset The address of the underlying asset to borrow
     * @param amount The amount to be borrowed
     * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     * @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
     * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
     * if he has been given credit delegation allowance
     **/
    function borrow(
        address asset,
        uint256 amount,
        uint256 interestRateMode,
        uint16 referralCode,
        address onBehalfOf
    ) external;

    /**
     * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
     * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
     * @param asset The address of the borrowed underlying asset previously borrowed
     * @param amount The amount to repay
     * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
     * @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
     * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
     * user calling the function if he wants to reduce/remove his own debt, or the address of any other
     * other borrower whose debt should be removed
     * @return The final amount repaid
     **/
    function repay(
        address asset,
        uint256 amount,
        uint256 rateMode,
        address onBehalfOf
    ) external returns (uint256);

    /**
     * @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
     * @param asset The address of the underlying asset borrowed
     * @param rateMode The rate mode that the user wants to swap to
     **/
    function swapBorrowRateMode(address asset, uint256 rateMode) external;

    /**
     * @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
     * - Users can be rebalanced if the following conditions are satisfied:
     *     1. Usage ratio is above 95%
     *     2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
     *        borrowed at a stable rate and depositors are not earning enough
     * @param asset The address of the underlying asset borrowed
     * @param user The address of the user to be rebalanced
     **/
    function rebalanceStableBorrowRate(address asset, address user) external;

    /**
     * @dev Allows depositors to enable/disable a specific deposited asset as collateral
     * @param asset The address of the underlying asset deposited
     * @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
     **/
    function setUserUseReserveAsCollateral(address asset, bool useAsCollateral)
        external;

    /**
     * @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
     * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
     *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     **/
    function liquidationCall(
        address collateralAsset,
        address debtAsset,
        address user,
        uint256 debtToCover,
        bool receiveAToken
    ) external;

    /**
     * @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
     * as long as the amount taken plus a fee is returned.
     * IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
     * For further details please visit https://developers.aave.com
     * @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
     * @param assets The addresses of the assets being flash-borrowed
     * @param amounts The amounts amounts being flash-borrowed
     * @param modes Types of the debt to open if the flash loan is not returned:
     *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
     *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
     * @param params Variadic packed params to pass to the receiver as extra information
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     **/
    function flashLoan(
        address receiverAddress,
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata modes,
        address onBehalfOf,
        bytes calldata params,
        uint16 referralCode
    ) external;

    /**
     * @dev Returns the user account data across all the reserves
     * @param user The address of the user
     * @return totalCollateralETH the total collateral in ETH of the user
     * @return totalDebtETH the total debt in ETH of the user
     * @return availableBorrowsETH the borrowing power left of the user
     * @return currentLiquidationThreshold the liquidation threshold of the user
     * @return ltv the loan to value of the user
     * @return healthFactor the current health factor of the user
     **/
    function getUserAccountData(address user)
        external
        view
        returns (
            uint256 totalCollateralETH,
            uint256 totalDebtETH,
            uint256 availableBorrowsETH,
            uint256 currentLiquidationThreshold,
            uint256 ltv,
            uint256 healthFactor
        );

    function initReserve(
        address reserve,
        address aTokenAddress,
        address stableDebtAddress,
        address variableDebtAddress,
        address interestRateStrategyAddress
    ) external;

    function setReserveInterestRateStrategyAddress(
        address reserve,
        address rateStrategyAddress
    ) external;

    function setConfiguration(address reserve, uint256 configuration) external;

    /**
     * @dev Returns the configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The configuration of the reserve
     **/
    function getConfiguration(address asset)
        external
        view
        returns (DataTypes.ReserveConfigurationMap memory);

    /**
     * @dev Returns the configuration of the user across all the reserves
     * @param user The user address
     * @return The configuration of the user
     **/
    function getUserConfiguration(address user)
        external
        view
        returns (DataTypes.UserConfigurationMap memory);

    /**
     * @dev Returns the normalized income normalized income of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve's normalized income
     */
    function getReserveNormalizedIncome(address asset)
        external
        view
        returns (uint256);

    /**
     * @dev Returns the normalized variable debt per unit of asset
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve normalized variable debt
     */
    function getReserveNormalizedVariableDebt(address asset)
        external
        view
        returns (uint256);

    /**
     * @dev Returns the state and configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The state of the reserve
     **/
    function getReserveData(address asset)
        external
        view
        returns (DataTypes.ReserveData memory);

    function finalizeTransfer(
        address asset,
        address from,
        address to,
        uint256 amount,
        uint256 balanceFromAfter,
        uint256 balanceToBefore
    ) external;

    function getReservesList() external view returns (address[] memory);

    function getAddressesProvider()
        external
        view
        returns (IMoolaLendingPoolAddressesProvider);

    function setPause(bool val) external;

    function paused() external view returns (bool);
}
          

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.11;

/**
 * @title LendingPoolAddressesProvider contract
 * @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
 * - Acting also as factory of proxies and admin of those, so with right to change its implementations
 * - Owned by the Aave Governance
 * @author Aave
 **/
interface IMoolaLendingPoolAddressesProvider {
    event MarketIdSet(string newMarketId);
    event LendingPoolUpdated(address indexed newAddress);
    event ConfigurationAdminUpdated(address indexed newAddress);
    event EmergencyAdminUpdated(address indexed newAddress);
    event LendingPoolConfiguratorUpdated(address indexed newAddress);
    event LendingPoolCollateralManagerUpdated(address indexed newAddress);
    event PriceOracleUpdated(address indexed newAddress);
    event LendingRateOracleUpdated(address indexed newAddress);
    event ProxyCreated(bytes32 id, address indexed newAddress);
    event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);

    function getMarketId() external view returns (string memory);

    function setMarketId(string calldata marketId) external;

    function setAddress(bytes32 id, address newAddress) external;

    function setAddressAsProxy(bytes32 id, address impl) external;

    function getAddress(bytes32 id) external view returns (address);

    function getLendingPool() external view returns (address);

    function setLendingPoolImpl(address pool) external;

    function getLendingPoolConfigurator() external view returns (address);

    function setLendingPoolConfiguratorImpl(address configurator) external;

    function getLendingPoolCollateralManager() external view returns (address);

    function setLendingPoolCollateralManager(address manager) external;

    function getPoolAdmin() external view returns (address);

    function setPoolAdmin(address admin) external;

    function getEmergencyAdmin() external view returns (address);

    function setEmergencyAdmin(address admin) external;

    function getPriceOracle() external view returns (address);

    function setPriceOracle(address priceOracle) external;

    function getLendingRateOracle() external view returns (address);

    function setLendingRateOracle(address lendingRateOracle) external;
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity 0.8.11;

interface IRegistry {
    function setAddressFor(string calldata, address) external;

    function getAddressForOrDie(bytes32) external view returns (address);

    function getAddressFor(bytes32) external view returns (address);

    function getAddressForStringOrDie(string calldata identifier)
        external
        view
        returns (address);

    function getAddressForString(string calldata identifier)
        external
        view
        returns (address);

    function isOneOf(bytes32[] calldata, address) external view returns (bool);
}
          

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

/**
 * @title This interface describes the functions specific to Celo Stable Tokens, and in the
 * absence of interface inheritance is intended as a companion to IERC20.sol and ICeloToken.sol.
 */
abstract contract IStableToken is ERC20 {
    function burn(uint256) external virtual returns (bool);

    function setInflationParameters(uint256, uint256) external virtual;

    function valueToUnits(uint256) external view virtual returns (uint256);

    function unitsToValue(uint256) external view virtual returns (uint256);

    function getInflationParameters()
        external
        view
        virtual
        returns (
            uint256,
            uint256,
            uint256,
            uint256
        );
}
          

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.11;

library DataTypes {
    // refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
    struct ReserveData {
        //stores the reserve configuration
        ReserveConfigurationMap configuration;
        //the liquidity index. Expressed in ray
        uint128 liquidityIndex;
        //variable borrow index. Expressed in ray
        uint128 variableBorrowIndex;
        //the current supply rate. Expressed in ray
        uint128 currentLiquidityRate;
        //the current variable borrow rate. Expressed in ray
        uint128 currentVariableBorrowRate;
        //the current stable borrow rate. Expressed in ray
        uint128 currentStableBorrowRate;
        uint40 lastUpdateTimestamp;
        //tokens addresses
        address aTokenAddress;
        address stableDebtTokenAddress;
        address variableDebtTokenAddress;
        //address of the interest rate strategy
        address interestRateStrategyAddress;
        //the id of the reserve. Represents the position in the list of the active reserves
        uint8 id;
    }

    struct ReserveConfigurationMap {
        //bit 0-15: LTV
        //bit 16-31: Liq. threshold
        //bit 32-47: Liq. bonus
        //bit 48-55: Decimals
        //bit 56: Reserve is active
        //bit 57: reserve is frozen
        //bit 58: borrowing is enabled
        //bit 59: stable rate borrowing enabled
        //bit 60-63: reserved
        //bit 64-79: reserve factor
        uint256 data;
    }

    struct UserConfigurationMap {
        uint256 data;
    }

    enum InterestRateMode {
        NONE,
        STABLE,
        VARIABLE
    }
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity ^0.8.10;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import {ERC4626Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol";
import {IERC20MetadataUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol";
import {SafeERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import {MathUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol";
import "src/interfaces/IMoolaLendingPool.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "src/interfaces/IStableToken.sol";
import "src/staking/StakedERC4626Upgradeable.sol";
import "src/interfaces/IRegistry.sol";

/// @title SpiralsCUSDVault
/// @author @douglasqian @no40
/// @notice This is a modification of the EIP-4626 tokenized vault standard
/// for yield-bearing tokens where the yield accrued on cUSD via a lending protocol
/// is held by the contract, giving the user a derivative token to redeem them at a
/// later date.
///
/// DEPRECATED: see "SpiralsCUSDImpactVault"
contract SpiralsCUSDVault is StakedERC4626Upgradeable {
    event Receive(address indexed sender, uint256 indexed amount);
    event DependenciesUpdated(
        address indexed moolaLendingPool,
        address celoRegistry
    );

    IRegistry internal c_celoRegistry;
    IMoolaLendingPool internal c_moolaLendingPool;

    function initialize(
        address _moolaLendingPoolAddress,
        address _celoRegistryAddress
    ) external initializer {
        __Ownable_init();
        __Pausable_init();
        __ReentrancyGuard_init();
        // Ensures that `_owner` is set.
        setDependencies(_moolaLendingPoolAddress, _celoRegistryAddress);
        // Ensures that `_moolaLendingPoolAddress` has been sanitized.
        address cUSDAddress = address(getStableToken());
        __ERC20_init("Spirals cUSD Vault Token", "spcUSD");
        __ERC4626_init(IERC20MetadataUpgradeable(cUSDAddress));
        __StakedERC4626_init(
            IERC20MetadataUpgradeable(
                c_moolaLendingPool.getReserveData(cUSDAddress).aTokenAddress
            )
        );
    }

    receive() external payable {
        emit Receive(msg.sender, msg.value);
    }

    /**
     * @notice Sets dependencies on contract (Moola contract addresses).
     */
    // lendingPoolAddrProvider 0xD1088091A174d33412a968Fa34Cb67131188B332
    // cUSD 0x765DE816845861e75A25fCA122bb6898B8B1282a
    function setDependencies(
        address _moolaLendingPoolAddress,
        address _celoRegistryAddress
    ) public onlyOwner {
        require(
            IRegistry(_celoRegistryAddress).getAddressForStringOrDie(
                "Validators"
            ) != address(0),
            "INVALID_REGISTRY_ADDRESS"
        );

        c_moolaLendingPool = IMoolaLendingPool(_moolaLendingPoolAddress);
        c_celoRegistry = IRegistry(_celoRegistryAddress);

        // Keep this here becaue "getStableToken" has a dependency on
        // "c_celoRegistry" being set.
        require(
            IMoolaLendingPool(_moolaLendingPoolAddress)
                .getReserveData(address(getStableToken()))
                .aTokenAddress != address(0),
            "INVALID_LENDING_POOL"
        );

        emit DependenciesUpdated(
            _moolaLendingPoolAddress,
            _celoRegistryAddress
        );
    }

    /**
     * @dev Deposit cUSD into Moola cUSD lending pool.
     */
    function stake(uint256 assets) internal virtual override {
        // Approve cUSD from contract -> Moola LP
        SafeERC20Upgradeable.safeApprove(
            IERC20Upgradeable(asset()),
            address(c_moolaLendingPool),
            assets
        );
        c_moolaLendingPool.deposit(asset(), assets, address(this), 0);
    }

    /**
     * @dev Withdraw cUSD from Moola lending pool.
     */
    function _withdrawFromStakedAsset(uint256 stakedAssets)
        internal
        virtual
        override
        returns (uint256 assets)
    {
        // Withdraw from Moola lending pool directly into "receiver" in
        // "_sendAssetToReceiver"
        return convertStakedToAssets(stakedAssets);
    }

    /**
     * @dev Send cUSD to receiver.
     */
    function _sendAssetToReceiver(
        address,
        address receiver,
        uint256 assets
    ) internal virtual override {
        c_moolaLendingPool.withdraw(
            asset(),
            convertAssetsToStaked(assets),
            receiver
        );
    }

    /**
     * @dev cUSD -> spcUSD
     */
    function _convertToShares(uint256 assets, MathUpgradeable.Rounding)
        internal
        pure
        override
        returns (uint256 shares)
    {
        return assets; // # assets = # shares for rebasing token
    }

    /**
     * @dev spcUSD -> cUSD
     */
    function _convertToAssets(uint256 shares, MathUpgradeable.Rounding)
        internal
        pure
        override
        returns (uint256 assets)
    {
        return shares; // # assets = # shares for rebasing token
    }

    /**
     * @dev mcUSD -> cUSD
     */
    function convertStakedToAssets(uint256 stakedAssets)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return stakedAssets;
    }

    /**
     * @dev cUSD -> mcUSD
     */
    function convertAssetsToStaked(uint256 assets)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return assets;
    }

    /// @dev Returns a StableToken.sol interface for interacting with the smart contract.
    function getStableToken() internal view returns (IStableToken) {
        address stableTokenAddr = c_celoRegistry.getAddressForStringOrDie(
            "StableToken"
        );
        return IStableToken(stableTokenAddr);
    }
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity ^0.8.10;

import {ERC4626Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC4626Upgradeable.sol";
import {IERC20MetadataUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol";
import {PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import {ReentrancyGuardUpgradeable} from "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";

/**
 * @dev Extension of ERC-4626 where the underlying asset is staked.
 * This contract tracks the staked asset contract as well, and handles
 * conversions between the two assets.
 */

abstract contract StakedERC4626Upgradeable is
    ERC4626Upgradeable,
    PausableUpgradeable,
    OwnableUpgradeable,
    ReentrancyGuardUpgradeable
{
    IERC20MetadataUpgradeable private _stakedAsset;

    /**
     * @dev Set the underlying asset and staked asset contracts.
     * These must be an ERC20-compatible contracts (ERC20 or ERC777).
     */
    function __StakedERC4626_init(IERC20MetadataUpgradeable stakedAsset_)
        internal
        onlyInitializing
    {
        __StakedERC4626_init_unchained(stakedAsset_);
    }

    function __StakedERC4626_init_unchained(
        IERC20MetadataUpgradeable stakedAsset_
    ) internal onlyInitializing {
        _stakedAsset = stakedAsset_;
    }

    /*
     * VAULT ENTRY POINTS
     */

    /**
     * @dev Extension of original "deposit" method with a post-deposit hook
     * to convert vault assets into staked assets.
     */
    function deposit(uint256 assets, address receiver)
        public
        virtual
        override
        whenNotPaused
        returns (uint256 shares)
    {
        shares = super.deposit(assets, receiver);
        stake(convertToAssets(shares));
        return shares;
    }

    /**
     * @dev Post-deposit hook to convert asset to stakedAsset in vault.
     */
    function stake(uint256 assets) internal virtual;

    /**
     * @dev Common code for withdraw flow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual override whenNotPaused {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }
        _checkCanWithdraw(caller, owner, receiver, shares, assets);

        // Burn shares before subsequent withdraws. Do this before other
        // steps to protect from reentrant attacks.
        _burn(owner, shares);
        assets = _withdrawFromStakedAsset(convertAssetsToStaked(assets));
        _sendAssetToReceiver(owner, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    /**
     * @dev Revert if withdrawal invalid for given inputs. Optional.
     */
    function _checkCanWithdraw(
        address caller,
        address owner,
        address receiver,
        uint256 shares,
        uint256 assets
    ) internal virtual {}

    /**
     * @dev Withdraw staked asset into asset in vault. Reverts on error.
     */
    function _withdrawFromStakedAsset(uint256 stakedAssets)
        internal
        virtual
        returns (uint256 assets);

    /**
     * @dev Post-withdraw hook to send converted assets to receiver
     */
    function _sendAssetToReceiver(
        address owner,
        address receiver,
        uint256 assets
    ) internal virtual;

    /*
     * VAULT MATH
     */

    /**
     * @dev Returns total value of staked ERC4626 vault, denominated in `_asset`
     */
    function totalAssets()
        public
        view
        virtual
        override
        returns (uint256 assets)
    {
        return
            IERC20MetadataUpgradeable(asset()).balanceOf(address(this)) +
            convertStakedToAssets(_stakedAsset.balanceOf(address(this)));
    }

    /**
     * @dev Returns a breakdown of asset vs. staked asset stored in the vault,
     * value denominated in `_asset`
     */
    function getVaultBreakdown()
        external
        view
        virtual
        returns (uint256, uint256)
    {
        return (
            IERC20MetadataUpgradeable(asset()).balanceOf(address(this)),
            convertStakedToAssets(_stakedAsset.balanceOf(address(this)))
        );
    }

    function convertStakedToAssets(uint256 stakedAssets)
        public
        view
        virtual
        returns (uint256 assets);

    function convertAssetsToStaked(uint256 assets)
        public
        view
        virtual
        returns (uint256 stakedAssets);
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity 0.8.11;

import "src/vaults/ImpactVault.sol";

interface IMigrationToImpactVault {
    event AssetsTransferredToImpactVault(
        address indexed _from,
        uint256 indexed _amountAssets,
        uint256 indexed _amountYield,
        address _vault
    );

    function transferAssetsToImpactVault(
        address[] memory _addrs,
        ImpactVault _vault,
        uint256[] memory _yields
    ) external;

    function transferAssetsToImpactVaultForAddress(
        address _addr,
        ImpactVault _vault,
        uint256 _yield
    ) external;
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity 0.8.11;

import {MathUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol";
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import {SafeERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import {PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import {ReentrancyGuardUpgradeable} from "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import {ImpactVaultManager} from "src/vaults/ImpactVaultManager.sol";

/**
 * @title ImpactVault
 * @author douglasqian
 * @notice This contract implements a new token vault standard inspired by
 *   ERC-4626. Key difference is that ImpactVault ERC20 tokens do not
 *   entitle depositors to a portion of the yield earned on the vault.
 *   Instead, shares of yield is tracked to mint a proportional amount of
 *   governance tokens to determine how the vault's yield will be deployed.
 *
 *   Note: this vault should always be initialized with an ERC20 token
 *   (ex: CELO) and a non-rebasing yield token (ex: stCELO).
 */
abstract contract ImpactVault is
    ERC20Upgradeable,
    PausableUpgradeable,
    OwnableUpgradeable,
    ReentrancyGuardUpgradeable
{
    using MathUpgradeable for uint256;
    using SafeERC20Upgradeable for IERC20Upgradeable;

    error ZeroDeposit();
    error ZeroWithdraw();

    event Deposit(uint256 _amount, address _receiver);
    event DepositWithYield(uint256 _amount, address _receiver, uint256 _yield);
    event WithdrawAsset(uint256 _amount, address _owner, address _receiver);
    event WithdrawYieldAsset(
        uint256 _amount,
        address _owner,
        address _receiver
    );
    event TransferYieldToManager(
        address _owner,
        uint256 _amountYieldAsset,
        uint256 _amountCUSD
    );

    IERC20Upgradeable internal asset;
    IERC20Upgradeable internal yieldAsset;
    address public impactVaultManager;

    /**
     * @dev Data structure that allows us to keep track of how much yield
     * each depositor in the vault is generating. For every depositor, this
     * is updated on deposits & withdraws.
     *
     * yield{t, t-1} = total_value{t} - total_value{t-1}
     */
    struct YieldIndex {
        // Tracks the amount of yield assets held at last update.
        // This is important to track because yield generated is calculated
        // based on how much this share of the vault has appreciated.
        uint256 amountYieldAssetAtLastUpdate;
        // Tracks the total value of yield assets associated with a depositor
        // in the vault at last update. Denominated in "asset"
        uint256 totalAssetValueAtLastUpdate;
        // Tracks the total amount of yield accumulated into vault.
        // Denominated in "asset".
        uint256 accumulatedYield;
    }

    mapping(address => YieldIndex) public yieldIndexMap;

    /**
     * @dev Set the underlying asset contracts. Checks invariant:
     * convertToAsset(convertToYieldAsset(asset)) == asset
     */
    function __ImpactVault_init(
        IERC20Upgradeable _asset,
        IERC20Upgradeable _yieldAsset,
        address _impactVaultManager
    ) internal onlyInitializing {
        __ImpactVault_init_unchained(_asset, _yieldAsset, _impactVaultManager);
    }

    function __ImpactVault_init_unchained(
        IERC20Upgradeable _asset,
        IERC20Upgradeable _yieldAsset,
        address _impactVaultManager
    ) internal onlyInitializing {
        asset = _asset;
        yieldAsset = _yieldAsset;
        impactVaultManager = _impactVaultManager;
    }

    /**
     * @notice Returns total asset value of vault.
     */
    function totalAssets() public view virtual returns (uint256) {
        return
            asset.balanceOf(address(this)) +
            convertToAsset(yieldAsset.balanceOf(address(this)));
    }

    /**
     * DEPOSIT
     */

    /**
     * @notice After asset are deposited in the vault, we stake it in the
     * underlying staked asset and mint new vault tokens.
     */
    function deposit(uint256 _amount, address _receiver)
        public
        virtual
        whenNotPaused
        nonReentrant
    {
        if (_amount == 0) {
            revert ZeroDeposit();
        }
        // Using SafeERC20Upgradeable
        // slither-disable-next-line unchecked-transfer
        asset.transferFrom(_msgSender(), address(this), _amount);
        _stake(_amount);
        _mint(_receiver, _amount);

        _updateYieldIndexSinceLastUpdate(_receiver, _amount, true);
        emit Deposit(_amount, _receiver);
    }

    /**
     * @dev For initial migration from V0 staking vaults only. Mint tokens
     * proportional to principal but stake all of the underlying asset that
     * can be transferred. Can only be called by a V0 vault.
     */
    function depositWithYield(
        uint256 _amount,
        address _receiver,
        uint256 _yield
    ) external virtual whenNotPaused nonReentrant onlyV0Vault(_msgSender()) {
        if (_amount + _yield == 0) {
            revert ZeroDeposit();
        }
        // Using SafeERC20Upgradeable
        // slither-disable-next-line unchecked-transfer
        asset.transferFrom(_msgSender(), address(this), _amount + _yield);
        _stake(_amount + _yield);
        _mint(_receiver, _amount);

        _updateYieldIndexSinceLastUpdate(_receiver, _amount + _yield, true);
        yieldIndexMap[_receiver].accumulatedYield += _yield;

        emit DepositWithYield(_amount, _receiver, _yield);
    }

    modifier onlyV0Vault(address _vault) {
        require(
            ImpactVaultManager(payable(impactVaultManager)).isV0Vault(_vault),
            "NOT_V0_VAULT"
        );
        _;
    }

    /**
     * WITHDRAW
     */

    /**
     * @notice Withdraws underlying asset by converting equivalent value in
     * staked asset and transferring it to the receiver.
     * @dev Burn vault tokens before withdrawing.
     */
    function withdraw(
        uint256 _amount,
        address _receiver,
        address _owner
    ) public virtual whenNotPaused nonReentrant {
        // Capture assets associated with owner before burn.
        _beforeWithdraw(_amount, _owner);
        _withdraw(_receiver, _amount);

        _updateYieldIndexSinceLastUpdate(_owner, _amount, false);
        emit WithdrawAsset(_amount, _owner, _receiver);
    }

    function withdrawAll(address _receiver, address _owner) external virtual {
        withdraw(balanceOf(_owner), _receiver, _owner);
    }

    /**
     * @notice Withdraws yield asset from owner balance to receiver.
     * @param _amountAsset Amount to withdraw, denominated in asset.
     */
    function withdrawYieldAsset(
        uint256 _amountAsset,
        address _receiver,
        address _owner
    ) public virtual whenNotPaused nonReentrant {
        // Capture assets associated with owner before burn.
        _beforeWithdraw(_amountAsset, _owner);
        uint256 amountYieldAssetToWithdraw = convertToYieldAsset(_amountAsset);
        yieldAsset.transfer(_receiver, amountYieldAssetToWithdraw);

        _updateYieldIndexSinceLastUpdate(_owner, _amountAsset, false);
        emit WithdrawYieldAsset(amountYieldAssetToWithdraw, _owner, _receiver);
    }

    function withdrawAllYieldAsset(address _receiver, address _owner)
        external
        virtual
    {
        withdrawYieldAsset(balanceOf(_owner), _receiver, _owner);
    }

    /**
     * @notice Transfers yield associated with a given address to the
     * ImpactVaultManager and updates their yield index. This can only be
     * triggered on the vault manager by the owner of the underlying asset.
     * Returns the amount of yield assets withdrawn from the vault in cUSD.
     */
    function transferYieldToManager(address _address)
        external
        virtual
        whenNotPaused
        nonReentrant
        onlyVaultManager
        returns (uint256 amountToTransferCUSD)
    {
        // Withdraw total yield value in cUSD to ImpactVaultManager
        uint256 amountToTransferYieldAsset = convertToYieldAsset(
            getYield(_address)
        );
        yieldAsset.transfer(_msgSender(), amountToTransferYieldAsset);

        // Reset yield index
        YieldIndex memory yIndex = yieldIndexMap[_address];
        yIndex.accumulatedYield = 0;
        yIndex.amountYieldAssetAtLastUpdate = 0;
        yIndex.totalAssetValueAtLastUpdate = balanceOf(_address); // just assets
        yieldIndexMap[_address] = yIndex;

        amountToTransferCUSD = convertToUSD(
            convertToAsset(amountToTransferYieldAsset)
        );
        emit TransferYieldToManager(
            _address,
            amountToTransferYieldAsset,
            amountToTransferCUSD
        );

        return amountToTransferCUSD;
    }

    modifier onlyVaultManager() {
        require(_msgSender() == impactVaultManager);
        _;
    }

    /**
     * @dev Common hook called before all withdrawal flows.
     */
    function _beforeWithdraw(uint256 _amount, address _owner) internal virtual {
        if (_amount == 0) {
            revert ZeroWithdraw();
        }
        address caller = _msgSender();
        if (caller != _owner) {
            _spendAllowance(_owner, caller, _amount);
        }
        _burn(_owner, _amount);
    }

    /**
     * YIELD INDEX
     */

    /**
     * @dev Updates the yield index for a given address. Yield values
     * should not change before & after this (invariant).
     *
     * @param _address Address of the depositor
     * @param _amount Amount of asset being deposited/withdrawn
     * @param _isDeposit True if deposit otherwise withdraw
     */
    function _updateYieldIndexSinceLastUpdate(
        address _address,
        uint256 _amount,
        bool _isDeposit
    ) internal virtual {
        uint256 yieldBeforeUpdate = getYield(_address);

        // Adjust the yield asset balance associated with this address.
        YieldIndex memory yIndex = yieldIndexMap[_address];
        if (_isDeposit) {
            yIndex.amountYieldAssetAtLastUpdate += convertToYieldAsset(_amount);
        } else {
            yIndex.amountYieldAssetAtLastUpdate -= convertToYieldAsset(_amount);
        }

        // Update total value of yield asset (denominated in asset).
        yIndex.totalAssetValueAtLastUpdate = convertToAsset(
            yIndex.amountYieldAssetAtLastUpdate
        );
        yIndex.accumulatedYield += _yieldEarnedSinceLastUpdate(_address);

        yieldIndexMap[_address] = yIndex;

        uint256 yieldAfterUpdate = getYield(_address);
        require(yieldBeforeUpdate == yieldAfterUpdate, "YIELD_SHOULDNT_CHANGE");
    }

    /**
     * @dev Computes the yield earned by yield assets since the last index update.
     */
    function _yieldEarnedSinceLastUpdate(address _address)
        internal
        view
        returns (uint256)
    {
        uint256 assetValueNow = convertToAsset(
            yieldIndexMap[_address].amountYieldAssetAtLastUpdate
        );
        uint256 assetValueAtLastUpdate = yieldIndexMap[_address]
            .totalAssetValueAtLastUpdate;

        // Capped at current value to prevent potential underflow from rounding errors.
        return
            assetValueNow -
            MathUpgradeable.min(assetValueNow, assetValueAtLastUpdate);
    }

    /**
     * @notice Returns total yield generated on vault in the underlying asset.
     */
    function totalYield() public view virtual returns (uint256) {
        return totalAssets() - totalSupply();
    }

    function totalYieldUSD() public view virtual returns (uint256) {
        return convertToUSD(totalYield());
    }

    /**
     * @notice Returns yield in vault associated with a depositor in underlying asset.
     */
    function getYield(address _address) public view virtual returns (uint256) {
        return
            yieldIndexMap[_address].accumulatedYield +
            _yieldEarnedSinceLastUpdate(_address);
    }

    /**
     * @notice Returns yield in vault associated with a depositor in cUSD.
     */
    function getYieldUSD(address _address)
        public
        view
        virtual
        returns (uint256)
    {
        return convertToUSD(getYield(_address));
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    /**
     * TO BE IMPLEMENTED
     */

    /**
     * @notice Converts an amount of the underlying asset to its value in cUSD.
     */
    function convertToUSD(uint256 _assetAmount)
        public
        view
        virtual
        returns (uint256);

    /**
     * @dev Converts amount of yield asset to asset.
     */
    function convertToAsset(uint256 _amountYieldAsset)
        public
        view
        virtual
        returns (uint256);

    /**
     * @dev Converts amount of asset to yield asset.
     */
    function convertToYieldAsset(uint256 _amountAsset)
        public
        view
        virtual
        returns (uint256);

    /**
     * @dev Post-deposit hook to stake assets deposited and store in vault.
     */
    function _stake(uint256 _assets) internal virtual;

    /**
     * @dev Core logic for withdrawing from staked asset contract to
     * receive underlying asset that we send back to receiver.
     */
    function _withdraw(address _receiver, uint256 _amount) internal virtual;
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity 0.8.11;

import {MathUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol";
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import {SafeERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import {PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import {ReentrancyGuardUpgradeable} from "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";

import {ImpactVault} from "src/vaults/ImpactVault.sol";
import {ERC20PresetMinterPauserUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/presets/ERC20PresetMinterPauserUpgradeable.sol";

/**
 * @title ImpactVaultManager
 * @author douglasqian
 * @notice This contract implements a new token vault standard inspired by
 *   ERC-4626. Key difference is that ImpactVault ERC20 tokens do not
 *   entitle depositors to a portion of the yield earned on the vault.
 *   Instead, shares of yield is tracked to mint a proportional amount of
 *   governance tokens to determine how the vault's yield will be deployed.
 *
 *   Note: this vault should always be initialized with an ERC20 token
 *   (ex: CELO) and a non-rebasing yield token (ex: stCELO).
 */
contract ImpactVaultManager is
    PausableUpgradeable,
    OwnableUpgradeable,
    ReentrancyGuardUpgradeable
{
    event Receive(address indexed sender, uint256 indexed amount);
    event ImpactVaultRegistered(address indexed vault);
    event ImpactVaultDeregistered(address indexed vault);
    event V0VaultRegistered(address indexed vault);
    event V0VaultDeregistered(address indexed vault);

    event DependenciesUpdated(
        address indexed manager,
        address indexed registry
    );

    // New vaults that implement the ImpactVault interface.
    address[] public impactVaults;

    ERC20PresetMinterPauserUpgradeable c_SPRL;

    // Original Spirals staking contracts. Not backward compatible with
    // ImpactVault interface so stored separately.
    address[] public v0Vaults;

    receive() external payable {
        emit Receive(msg.sender, msg.value);
    }

    function initialize(address _sprlTokenAddress) external initializer {
        __Ownable_init();
        __Pausable_init();
        __ReentrancyGuard_init();
        // Ensures that `_owner` is set
        setDependencies(_sprlTokenAddress);
    }

    function setDependencies(address _sprlTokenAddress) public onlyOwner {
        c_SPRL = ERC20PresetMinterPauserUpgradeable(_sprlTokenAddress);
    }

    /**
     * @notice Add a new ImpactVault
     */
    function registerVault(address _vaultToAdd)
        external
        onlyOwner
        whenNotPaused
        onlyNotRegisteredVault(impactVaults, _vaultToAdd)
    {
        impactVaults.push(_vaultToAdd);
        emit ImpactVaultRegistered(_vaultToAdd);
    }

    /**
     * @notice For migration purposes only.
     */
    function registerV0Vault(address _vaultToAdd)
        external
        onlyOwner
        whenNotPaused
        onlyNotRegisteredVault(v0Vaults, _vaultToAdd)
    {
        v0Vaults.push(_vaultToAdd);
        emit V0VaultRegistered(_vaultToAdd);
    }

    /**
     * @notice Remove a registered ImpactVault
     */
    function deregisterVault(address _vaultToRemove)
        external
        onlyOwner
        whenNotPaused
        onlyRegisteredVault(impactVaults, _vaultToRemove)
    {
        for (uint256 i = 0; i < impactVaults.length; i++) {
            if (impactVaults[i] == _vaultToRemove) {
                impactVaults[i] = impactVaults[impactVaults.length - 1];
                impactVaults.pop();
                break;
            }
        }
        emit ImpactVaultDeregistered(_vaultToRemove);
    }

    function deregisterV0Vault(address _vaultToRemove)
        external
        onlyOwner
        whenNotPaused
        onlyRegisteredVault(v0Vaults, _vaultToRemove)
    {
        for (uint256 i = 0; i < v0Vaults.length; i++) {
            if (v0Vaults[i] == _vaultToRemove) {
                v0Vaults[i] = v0Vaults[v0Vaults.length - 1];
                v0Vaults.pop();
                break;
            }
        }
        emit V0VaultDeregistered(_vaultToRemove);
    }

    modifier onlyRegisteredVault(address[] memory _vaults, address _vault) {
        require(isRegisteredVault(_vaults, _vault), "VAULT_NOT_REGISTERED");
        _;
    }

    modifier onlyNotRegisteredVault(address[] memory _vaults, address _vault) {
        require(
            !isRegisteredVault(_vaults, _vault),
            "VAULT_ALREADY_REGISTERED"
        );
        _;
    }

    function isImpactVault(address _vault) public view returns (bool) {
        return isRegisteredVault(impactVaults, _vault);
    }

    function isV0Vault(address _vault) public view returns (bool) {
        return isRegisteredVault(v0Vaults, _vault);
    }

    function isRegisteredVault(address[] memory _vaults, address _vault)
        internal
        pure
        returns (bool isRegistered)
    {
        for (uint256 i = 0; i < _vaults.length; i++) {
            if (_vaults[i] == _vault) {
                isRegistered = true;
                break;
            }
        }
        return isRegistered;
    }

    /**
     * @notice Claims SPRL governance tokens for a given address in proportion
     * to the yield associated with that address across all registered vaults.
     *
     * Withdraws underlying yield assets from vault into this contract.
     */
    function claimGovernanceTokens() external whenNotPaused nonReentrant {
        uint256 totalYieldUSD;
        for (uint256 i = 0; i < impactVaults.length; i++) {
            totalYieldUSD += ImpactVault(impactVaults[i])
                .transferYieldToManager(_msgSender());
        }
        c_SPRL.mint(_msgSender(), totalYieldUSD);
    }

    /**
     * @dev Returns the total yield in cUSD associated with a given address
     * across all impact vaults.
     */
    function getTotalYieldCUSD(address _address)
        public
        view
        returns (uint256 totalYieldUSD)
    {
        for (uint256 i = 0; i < impactVaults.length; i++) {
            uint256 y = ImpactVault(impactVaults[i]).getYieldUSD(_address);
            totalYieldUSD += y;
        }
        return totalYieldUSD;
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }
}
          

// SPDX-License-Identifier: Apache-2.0
// https://docs.soliditylang.org/en/v0.8.10/style-guide.html
pragma solidity 0.8.11;

import {IRegistry} from "src/interfaces/IRegistry.sol";
import {ImpactVault} from "src/vaults/ImpactVault.sol";
import {IMoolaLendingPool} from "src/interfaces/IMoolaLendingPool.sol";
import {IERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import {IERC4626Upgradeable} from "@openzeppelin/contracts-upgradeable/interfaces/IERC4626Upgradeable.sol";
import {SafeERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";

/**
 * @title SpiralsCUSDImpactVault
 * @author @douglasqian @no40
 * @notice Implementation of ImpactVault on the Celo USD stablecoin (cUSD).
 *   cUSD deposited is deposited in Moola Market's cUSD lending pool as
 *   collateral. No loan positions are taken out to ensure a good health factor
 *   and minimizing chances of automatic liquidation. In return, this contract
 *   receives a rebasing token (mcUSD) that can be redeemed 1-to-1 for cUSD.
 */
contract SpiralsCUSDImpactVault is ImpactVault {
    using SafeERC20Upgradeable for IERC20Upgradeable;

    event Receive(address indexed sender, uint256 indexed amount);
    event DependenciesUpdated(
        address indexed moolaLendingPool,
        address celoRegistry
    );

    IRegistry internal c_celoRegistry;
    IMoolaLendingPool internal c_moolaLendingPool;
    IERC4626Upgradeable internal c_wmcUSD;

    receive() external payable {
        emit Receive(msg.sender, msg.value);
    }

    /**
     * Inititalize as ImpactVault.
     *   asset -> cUSD
     *   yieldAsset -> wmcUSD
     */
    function initialize(
        address _moolaLendingPoolAddress,
        address _wmcUSDAddress,
        address _celoRegistryAddress,
        address _impactVaultManagerAddress
    ) external initializer {
        __Ownable_init();
        __Pausable_init();
        __ReentrancyGuard_init();
        // Ensures that `_owner` is set.
        setDependencies(_moolaLendingPoolAddress, _celoRegistryAddress);

        // Ensures that `_moolaLendingPoolAddress` has been sanitized.
        IERC20Upgradeable cUSD = getStableToken();
        c_wmcUSD = IERC4626Upgradeable(_wmcUSDAddress);
        require(
            c_wmcUSD.asset() == address(getMCUSD()),
            "NON_MATCHING_mcUSD_ADDRESS"
        );

        __ERC20_init("Spirals cUSD Vault Token", "spcUSD");
        __ImpactVault_init(
            cUSD,
            IERC20Upgradeable(c_wmcUSD),
            _impactVaultManagerAddress
        );
    }

    /**
     * @notice Sets dependencies on contract (Moola contract addresses).
     */
    function setDependencies(
        address _moolaLendingPoolAddress,
        address _celoRegistryAddress
    ) public onlyOwner {
        require(
            IRegistry(_celoRegistryAddress).getAddressForStringOrDie(
                "Validators"
            ) != address(0),
            "INVALID_REGISTRY_ADDRESS"
        );

        c_moolaLendingPool = IMoolaLendingPool(_moolaLendingPoolAddress);
        c_celoRegistry = IRegistry(_celoRegistryAddress);

        // Keep this here becaue "getStableToken" has a dependency on
        // "c_celoRegistry" being set.
        require(
            IMoolaLendingPool(_moolaLendingPoolAddress)
                .getReserveData(address(getStableToken()))
                .aTokenAddress != address(0),
            "INVALID_LENDING_POOL"
        );
        emit DependenciesUpdated(
            _moolaLendingPoolAddress,
            _celoRegistryAddress
        );
    }

    /**
     * @dev Deposit cUSD into Moola lending pool and convert mcUSD to wmcUSD.
     */
    function _stake(uint256 _amount) internal virtual override {
        // Using SafeERC20Upgradeable
        // slither-disable-next-line unused-return
        asset.approve(address(c_moolaLendingPool), _amount);

        uint256 mcUSDBefore = getMCUSD().balanceOf(address(this));
        c_moolaLendingPool.deposit(address(asset), _amount, address(this), 0);
        uint256 mcUSDReceived = getMCUSD().balanceOf(address(this)) -
            mcUSDBefore;

        // Convert mcUSD to wmcUSD.
        getMCUSD().approve(address(c_wmcUSD), mcUSDReceived);
        c_wmcUSD.deposit(mcUSDReceived, address(this));
    }

    /**
     * @dev Withdraws cUSD from wmcUSD and then converts it to mcUSD from
     * Moola lending pool into cUSD to send to receiver.
     */
    function _withdraw(address _receiver, uint256 _amount)
        internal
        virtual
        override
    {
        // Withdraw mcUSD assets to this vault.
        uint256 mcUSDBefore = getMCUSD().balanceOf(address(this));
        c_wmcUSD.withdraw(_amount, address(this), address(this));
        uint256 mcUSDReceived = getMCUSD().balanceOf(address(this)) -
            mcUSDBefore;

        // Burn mcUSD to withdraw cUSD to receiver.
        // withdraw here returns _amount, return value not needed
        // slither-disable-next-line unused-return
        c_moolaLendingPool.withdraw(address(asset), mcUSDReceived, _receiver);
    }

    /**
     * @dev mcUSD -> cUSD
     */
    function convertToUSD(uint256 _amountAsset)
        public
        view
        virtual
        override
        returns (uint256 usdAmount)
    {
        return _amountAsset;
    }

    /**
     * @dev wmcUSD -> mcUSD
     */
    function convertToAsset(uint256 _amountYieldAsset)
        public
        view
        virtual
        override
        returns (uint256 amountAsset)
    {
        return c_wmcUSD.convertToAssets(_amountYieldAsset);
    }

    /**
     * @dev mcUSD -> wmcUSD
     */
    function convertToYieldAsset(uint256 _amountAsset)
        public
        view
        virtual
        override
        returns (uint256 amountYieldAsset)
    {
        return c_wmcUSD.convertToShares(_amountAsset);
    }

    /**
     * @dev Returns the StableToken contract (cUSD).
     */
    function getStableToken() internal view returns (IERC20Upgradeable) {
        address stableTokenAddr = c_celoRegistry.getAddressForStringOrDie(
            "StableToken"
        );
        return IERC20Upgradeable(stableTokenAddr);
    }

    /**
     * @dev Returns the Moola cUSD AToken contract (mcUSD).
     */
    function getMCUSD() internal view returns (IERC20Upgradeable) {
        return
            IERC20Upgradeable(
                c_moolaLendingPool
                    .getReserveData(address(getStableToken()))
                    .aTokenAddress
            );
    }
}